CWS Sliding Glass & Patio Doors Nationwide | TruePane Windows & Doors

CWS Sliding Glass & Patio Doors in Pompano Beach: What to Know First

CWS sliding glass and patio doors in Pompano Beach typically need two kinds of work: roller replacement and track realignment, or full door replacement when the frame has corroded past the point of a reliable repair. TruePane Windows & Doors is an independent CWS service provider, not a manufacturer warranty station, so we make decisions based on what will hold up in Pompano Beach salt air, not what protects a factory’s margin. Most CWS door repairs run $185 to $440, and most replacements run $1,800 to $4,200 installed, depending on size and what’s behind the wall. We quote free, we quote on paper, and we register both warranty layers in writing before we leave.

Call (863) 591-8673

This page is for CWS owners in Pompano Beach who want the door fixed right the first time. If you’ve got a CWS slider that grinds, sticks, or leaks, call (863) 591-8673 and a live person will answer.

How CWS Products Fail - and How We Fix Them

CWS doors are solid mid-range Florida products, but they have known failure points that show up consistently in Pompano Beach homes. Here is what we see most often and what we actually do about it:

• CWS 6800 Series slider rollers seize in the track. The original roller assemblies on these doors use nylon wheels on steel axles. In Pompano Beach, airborne salt settles into the bottom track, and the nylon absorbs enough moisture to swell and bind against the axle. The door starts dragging after five or six years, and owners often assume the track is bent. It is rarely the track. We replace the rollers with sealed stainless aftermarket units and clean the track channel, and the door glides again.
• CWS 7500 and 7600 patio door frames gather water at the weep holes. CWS uses a recessed weep system on these lines, and in a coastal climate those small channels clog with salt crust and sand faster than the manufacturer expected. When the weep holes block, water sits inside the bottom rail and wicks into the roller housing. By the time the owner notices a damp odor or a stiff door, the rollers are already pitting. We drill out and ream the weep system, replace damaged rollers, and show the owner how to flush the track twice a year with fresh water.
• CWS 8200 series stainless cladding separates at the corners. This is a finish issue, not a structural one, but it lets moisture get between the cladding and the aluminum underneath in Pompano Beach’s high-humidity months. We remove the old corner gaskets, clean the joint, re-seal with a marine-grade adhesive, and reset the cladding so it drains instead of trapping water.
• CWS single-pane sliders in older Pompano Beach homes leak air at the interlock. The interlock on single-pane CWS doors is a thin aluminum fin that warps with heat cycling. After enough years of Florida sun on the west-facing elevations, that fin pulls away and the door leaks air. We straighten or replace the interlock fin and replace the mohair pile weatherstripping with a denser pile that actually seals against the frame.
• CWS door handles snap at the lock cylinder housing. The original handles are die-cast, and the lock cylinder bore is the thinnest section. Over time the casting fails right there, leaving the owner unable to lock the door from the inside. This is a safety issue. We replace the handle set with a milled aluminum aftermarket set that will not fail the same way, and we re-key it to match the original key when possible.

Our CWS Sliding Glass & Patio Doors Process

Every CWS job follows the same steps, whether it is a roller swap or a full patio door replacement:

1. 1
   You call (863) 591-8673 and describe the door. A live person answers. We ask what the door is doing, when it started, and what brand and approximate age it is. We schedule a window time, and we show up when we say we will.
2. 2
   We measure and diagnose on site. The tech pulls the door panel if needed, checks the track condition, the frame square, the rollers, the weatherstripping, and the flashing. This is where we find what is actually wrong, not what the last contractor said was wrong.
3. 3
   We give you a written quote before any work starts. The quote lists the specific parts, whether they are OEM CWS or aftermarket, the labor, and the total. No allowances, no vague line items. If the door needs replacing, we quote CWS-compatible lines side by side with PGT, CGI, ES Windows, and ECO Window Systems so you can see the price difference on paper.
4. 4
   We do the work and test the door before we call it done. For a repair, that means the door slides without drag, locks without binding, and seals without daylight showing through. For a replacement, it means the frame is square, the reveal is consistent, the threshold is sealed, and the glass is clean.
5. 5
   We register both warranty layers in writing before the truck leaves your driveway. This is The Keystone Standard, and we do not skip it. The manufacturer warranty and our Done Right Promise go into your hands on a printed sheet, not a promise made over the phone.

What CWS Sliding Glass & Patio Doors Costs in Pompano Beach

CWS sliding and patio door work in Pompano Beach falls into a few common scenarios. Here is what we quote most often:

What moves the price: the size of the opening, whether the existing frame is salvageable, and whether the door carries hurricane impact glass. A six-foot slider without impact glass costs less. A twelve-foot impact-rated opening costs more. If you call us, you will get an exact number in writing, and it will not change once the work starts. Call (863) 591-8673 for a free estimate.

Why Pompano Beach Homeowners Call TruePane Windows & Doors for CWS Work

Dale Kessler grew up in the Pompano Beach Highlands and spent enough years watching salt air eat through poorly sealed frames to know what a bad CWS repair actually costs a homeowner. We have been serving Broward County since 2008, and we run TruePane the way a second-generation glazier runs a shop: slowly enough to do it once, carefully enough not to have to do it twice. Every job carries our Done Right Promise. If the door is not right, we make it right, no paperwork and no arguing. The Keystone Standard means both warranty layers are registered in writing and the durations are stated before the truck leaves your driveway. Our technicians are background-checked and uniformed. They know CWS doors, and they also quote PGT, CGI, ES Windows, and ECO Window Systems side by side when replacement makes more sense than repair. We measure every opening twice. We quote on paper. We stand behind it.

FAQs