CWS Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

CWS Shingle, Tile & Metal Roofing in Pompano Beach: What to Know First

We repair and replace CWS shingle, tile, and metal roofing systems throughout Pompano Beach as an independent CWS service provider. Most CWS roofing jobs in this area take one to two working days from inspection to finished work, depending on what’s failing and whether we’re matching existing material or replacing a section. Our pricing is upfront and written, which means the number on your estimate is the number on the bill, no change orders snuck in after the fact. This page is for homeowners who own a CWS roof and want someone who knows the product line by heart, not by a training video.

Call (863) 591-8673

If your CWS roof is leaking, lifting, or making noise in a Pompano Beach storm, call (863) 591-8673 for a free estimate. A live person answers, day or night.

How CWS Products Fail - and How We Fix Them

Every roof brand has its own personality. CWS is solid material, but Pompano Beach is hard on everything. Salt air, afternoon storms, and that July heat pull weaknesses to the surface. Here’s what we actually see on CWS roofs in this city:

• Flashing separation at CWS tile valleys. Tile roof valleys in Pompano Beach get hammered by wind-driven rain off the ocean. The flashing under CWS tile valleys, particularly on homes built before 2010, tends to lift at the edges where the original installer relied on mastic instead of mechanically fastened metal. Once that mastic dries out, water sneaks under the tile and rots the underlayment. We pull the affected tiles, replace the flashing with mechanically fastened metal, and reset everything with fresh mortar where needed.
• Metal panel seam creep. CWS standing seam and batten panels expand and contract with Florida’s daily temperature swings. After years of that cycling, the seam fasteners on some older CWS metal lines work loose enough that panels shift by a quarter inch or more. Homeowners notice it as a rattling in high wind or water stains at the ridge. We re-secure the seams, check the clip spacing, and replace any fasteners that have corroded from salt exposure.
• Shingle granule loss and edge curling on CWS architectural lines. In Pompano Beach, shingle roofs face two enemies: UV and humidity. CWS architectural shingles are well made, but after twelve to fifteen years near the coast we see granule loss along the eaves and slight curling at the edges. If caught early, we can reset and seal problem sections. If the deck is still sound, a partial replacement is often the honest call rather than a full tear-off.
• Underlayment fatigue beneath CWS tile. The tile itself can look fine for decades. The underlayment underneath does not. Pompano Beach homes built in the 1990s and early 2000s often have original felt that’s now brittle. By the time water shows in the ceiling, that underlayment has been failing for a while. We inspect the deck during every tile repair and tell you straight if the underlayment needs attention before more tile goes back on.
• Ridge cap cracking on CWS tile profiles. The ridge caps are the first CWS tile pieces to go, because they sit fully exposed. A cracked ridge cap lets water into the gaps between tiles and down to the underlayment. If the crack is hairline, we seal it. If it’s structural, we replace the cap and re-bed it properly.

Our CWS Shingle, Tile & Metal Roofing Process

We don’t treat a CWS roof job like a guess. It starts with the roof telling us what’s wrong, and the process stays honest from there.

1. 1
   Call and inspection. You call (863) 591-8673 and describe the issue. We schedule a visit, walk the roof, and inspect the problem area. If it’s a leak, we trace it. If it’s noise or movement, we test seams and fasteners.
2. 2
   Written diagnosis and parts decision. We tell you exactly what’s failing and what it will take to fix it. For CWS roofs under active manufacturer warranty, we use OEM materials where the warranty requires them. For everything else, we price both OEM and proven aftermarket options side by side on paper so you decide with full information.
3. 3
   The repair or replacement. We bring the right material, the right fasteners, and a crew that’s done this before. Tile gets reset with proper mortar. Metal gets mechanically fastened, not glued. Shingles get sealed and nailed to spec.
4. 4
   Weather test. Before we call the job done, we test the repair. If it’s a leak, we run water over the affected area. If it’s metal, we check every seam and clip we touched.
5. 5
   Cleanup. We leave your roof and yard the way we found them, minus the broken material. Old tile and flashing go with us, not into your landscaping.
6. 6
   The Done Right Promise. If something we fixed isn’t holding, we come back and make it right. No arguing, no paperwork fight.

What CWS Shingle, Tile & Metal Roofing Costs in Pompano Beach

Roof pricing is honest when it’s specific. Here’s what CWS work typically runs in the Pompano Beach market:

• Minor tile repair (cracked or displaced tiles, one area): $325-$650
• Flashing replacement (single valley or penetration): $450-$950
• Metal seam re-securing (per linear run): $250-$550
• Shingle section repair (up to 100 square feet): $500-$1,200
• Ridge cap replacement (per cap, material included): $85-$180
• Full underlayment replacement under existing tile (per 10 squares): $2,800-$4,200

What moves the price: roof pitch, number of stories, whether the deck underneath needs work, and whether the matching CWS material is still available or we’re sourcing an alternate. Call (863) 591-8673 and we’ll give you a written, line-item estimate. It’s free, and the price doesn’t change once you approve it.

Why Pompano Beach Homeowners Call TruePane Windows & Doors for CWS Work

Some companies will send whoever’s available to look at a CWS roof. We send someone who knows the product and the climate. Dale Kessler grew up in the Pompano Beach Highlands and has spent enough years watching salt air corrode everything it touches to respect what this weather does to a roof joint that isn’t set right. Our techs are background-checked and uniformed, and they measure twice before touching anything. We also service PGT, CGI, ES Windows, and ECO Window Systems, so if your CWS roof issue turns out to be a bigger envelope problem, we can see the whole picture, not just one square of it. If the work isn’t done right, we come back. That’s the Done Right Promise, and it means what it says. Dale’s rule is on the whiteboard and it hasn’t changed: if the pane is not true, the job is not done. Roofs are no different.

FAQs