Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ECO Window Systems Shingle, Tile & Metal Roofing in Pompano Beach: What to Know First
We provide independent ECO Window Systems shingle, tile, and metal roofing service in Pompano Beach, and most repair calls are completed in a single visit. A typical ECO Window Systems roof-related repair runs between $275 and $680, while full replacement work on larger openings starts around $1,200 and goes up from there depending on glass package and frame condition. That’s an honest range, not a teaser rate. If you own a ECO Window Systems product and the flashing, seal, or frame is failing against your Pompano Beach roof line, call (863) 591-8673 and we’ll give you a straight answer before we ever schedule the truck.
How ECO Window Systems Products Fail - and How We Fix Them
- Flashing separation at the head jamb on tilt-turn units. ECO’s tilt-turn line, common in Pompano Beach condos built in the early 2000s, uses a two-layer flashing detail where the outer membrane can separate from the frame under repeated thermal cycling. What starts as a small gap becomes a channel for wind-driven rain during summer storms. We remove the damaged flashing, re-bed the frame with a marine-grade sealant rated for South Florida UV exposure, and re-tape the seam. The fix holds because we address the cause, not just the visible gap.
- Roof-deck water tracking behind fixed-glass frames. On ECO’s fixed picture windows installed under tile roof overhangs, improper valley flashing from the original roof install allows water to track behind the frame. Homeowners see staining at the interior drywall first, then a musty smell. We pull the interior trim, identify the entry point, and correct the roof-side flashing detail before resealing the frame. This is the kind of job where you need someone who understands both roofing and glazing, because the failure is a handoff between two trades.
- Frame warping on large sliders exposed to full afternoon sun. ECO’s sliding glass door frames, especially the aluminum-reinforced vinyl series, can move enough on west-facing Pompano Beach exposures to compromise the weather stripping. The door binds, the seal breaks, and water finds its way to the track. We re-shim the frame, reset the rollers, and replace the weather stripping with a denser profile than what shipped originally. On the worst cases, we’ll recommend a full frame replacement and re-register the warranty in writing before we leave.
- Hardware corrosion where metal roofs shed concentrated runoff. ECO casement crank mechanisms on units positioned directly below a metal roof valley see salt-laced runoff that accelerates corrosion on the hardware cover and operator arm. You’ll see white oxidation on the crank and stiffness in the gear. We source stainless replacement hardware where ECO’s original spec calls for coated steel, on the cases where OEM parts are still available; where they aren’t, we use a manufacturer-approved aftermarket equivalent with equal or better corrosion rating. That’s a parts nuance ECO’s own documentation doesn’t explain.
- Condensation between panes that only appears when the roof is wet. This is a signature ECO symptom on a small run of double-glazed units made between 2012 and 2015. The edge seal doesn’t fail visibly, but a slow moisture vapor drive through the spacer shows up only when the roof surface above the window is saturated after a heavy rain. It fogs for a day, then clears. We confirm the diagnosis by checking the unit’s spacer through the frame channel, then replace the insulated glass, often at a better price than expected because the sash doesn’t need to be pulled - only the lite.
Our ECO Window Systems Shingle, Tile & Metal Roofing Process
The job starts with a phone call that a live person answers. We gather details about the unit, the roof type above it, and the symptoms you’re seeing. All of that goes into the estimate you’ll get upfront, not a mystery line on a later invoice.
- 1
The call and the questions. We ask which ECO line you have - casement, tilt-turn, fixed, slider - and what the roof surface is. Shingle roofs shed water fast, tile roofs create wind eddies, and metal roofs concentrate runoff at valley ends. That changes the diagnosis before we ever see the unit.
- 2
The on-site diagnostic. A uniformed, background-checked tech measures the opening twice and traces the leak path with a moisture meter and visual inspection. On a Pompano Beach tile roof, we’ll get eyes on the flashing from above, not just from inside.
- 3
The parts decision. If the unit’s still under ECO’s warranty, we tell you what’s covered and handle the paperwork correctly - registered in writing before anything is ordered. If it’s out of warranty, we price OEM and a solid aftermarket option side by side on paper so you see both.
- 4
The repair or replacement. We work in a single visit whenever possible. Flashing gets re-bedded, hardware gets swapped, glazing gets reset. The work area is clean when we’re done.
- 5
The test and the written confirmation. We run water on the repaired area and check for leaks before we call it done. Every job is backed by the Done Right Promise and The Keystone Standard - both warranty layers registered in writing, durations stated, before the truck leaves your driveway. If the pane is not true, the job is not done.
What ECO Window Systems Shingle, Tile & Metal Roofing Costs in Pompano Beach
Here’s real money, not a teaser number:
- Flashing repair at roof-to-window junction: $275-$680, depending on whether one or two sides need re-bedding and whether we’re working from a ladder or a scaffold on a tile roof.
- Hardware replacement (crank, operator, lock): $120-$340 per unit, with the corrosion-resistant aftermarket upgrade typically adding $40-$80 over the coated steel original.
- Weather stripping and seal replacement on a slider: $180-$420, including re-shimming the frame if it’s moved.
- Insulated glass unit replacement (small to mid-size): $400-$950, with the biggest variable being the glass package and whether it’s clear, low-E, or tinted.
- Full window or door replacement in a hard-to-flash opening: $1,200-$4,500, depending on size, frame material, and the roof detail we’re tying into.
What moves the price is access. A second-story window tucked under a Pompano Beach barrel tile eave costs more to reach safely than a ground-floor slider. We’ll tell you exactly why a number is what it is. Call (863) 591-8673 for a free estimate with no surprise line items.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We’re an independent ECO Window Systems service provider - not the manufacturer, not a factory rep. That independence means we don’t have to push a new unit when a repair is the right call. It also means we price honestly and stand behind the work with a Done Right Promise, backed by The Keystone Standard: both warranty layers registered in writing before the truck leaves. Dale Kessler grew up in the Pompano Beach Highlands and has spent nearly two decades measuring, setting, and finishing windows and doors across Broward County. He runs this company with one rule on the whiteboard: if the pane is not true, the job is not done. We also work on PGT, CGI, CWS, and ES Windows systems, so when a home has mixed brands and one of them is an ECO, we handle the whole opening, the whole wall, the whole roof junction. One call. A live person answers, 24/7.
FAQs
Is my ECO Window Systems warranty still valid if TruePane Windows & Doors does the roof-related repair?
It depends on what’s failing and who installed the window originally. If the unit is still within ECO’s warranty window, we handle the registration and paperwork for you, in writing, before any work happens. If the failure is in the roof flashing or installation rather than the window itself, the original installer would generally be the responsible party - but we’ll assess it straight and tell you where the fault lies. Call (863) 591-8673 and we’ll walk through your specific warranty docs.
Can you actually fix a roof flashing issue on a ECO window without pulling the whole frame?
Yes, in most cases. Pulling the frame is a last resort, not the first move. We can re-bed the exterior flashing, replace the weather barrier above the head jamb, and reseal the unit without removing the window. The exceptions are frame rot or severe movement, where a full r&r is genuinely the only safe fix. We’ll show you the evidence either way before you spend a dollar.
How fast can you get ECO Window Systems-specific parts in Pompano Beach?
Most hardware and sealing components ship within 3-7 business days depending on the part and whether we’re ordering OEM or a stronger aftermarket equivalent. Insulated glass units take 1-3 weeks because they’re built to your frame’s exact dimensions. We’ll give you a straight timeline before we order, and we don’t start the clock until we’ve confirmed the diagnosis. Call (863) 591-8673 for specifics.
Should I repair or replace my ECO window if the sea air around Pompano Beach has corroded the hardware?
Repair is the right call if the frame is sound and the glass package still seals. Hardware replacement runs $120-$340, and with a corrosion-resistant upgrade you’ll get years out of it. Replacement makes sense when the frame has moved, the glazing has failed, or you’re chasing the same leak every season. We’ll quote both, on paper, and let you decide without pressure.
What makes your ECO Window Systems work different from a general handyman who says he can seal a window?
A handyman will usually caulk the visible gap and leave. That’s a temporary patch on a permanent problem. The hard part of shingle, tile, and metal roofing work around windows isn’t the sealant - it’s understanding the water path from roof to frame to interior. If it isn’t in writing, it isn’t a warranty. We put our promise in writing, and we’ve been doing it long enough in Pompano Beach to know what the salt air, summer storms, and a tile roof valley do to a joint that isn’t set right. Call (863) 591-8673 to schedule a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After