Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Window Replacement: The Pompano Beach Owner’s Guide
Mr-Glass window replacement in Pompano Beach typically runs $220 to $480 per unit installed, depending on the glass package and frame condition. We stock Mr-Glass-compatible insulated glass units on our trucks and can handle most replacements in one visit. Most owners discover the failure the same way: they wake up to a window that’s fogged between the panes, or they feel a draft around the sash that wasn’t there last hurricane season.
What’s actually happening is the seal on the insulated glass unit, or IGU, has let go. In Pompano Beach, salt air and humidity work on seals faster than almost anywhere else in Florida. Once that seal fails, the argon or krypton gas between your panes escapes and the window stops doing its job. The glass gets cloudy, the room gets hotter, and your air conditioner runs longer trying to compensate. We’ve been replacing failed Mr-Glass units across Broward County long enough to know exactly what that looks like from the street. Dale Kessler has watched it happen since he grew up in the Pompano Beach Highlands, where salt air eats through poorly sealed frames every single year.
Which Mr-Glass Models This Applies To
Mr-Glass manufactured windows under several series lines over the years, and the parts are not all interchangeable. The two series we see most often in Pompano Beach homes are the MG-2000 single-hung and the MG-Therm double-hung. Older MG-2000 units use a 7/8-inch IGU thickness, while the MG-Therm line moved to a 1-inch IGU for better thermal performance. You cannot swap one for the other without changing the glazing bead and, in some cases, the sash itself.
If you can find the label, you’re ahead. Mr-Glass etched a small series code into one corner of the glass on most units built after 2005. It’s usually two or three characters, like MG2 or MGT, followed by a date code. If the label has worn off or the window is older, our technicians measure the exact IGU thickness, the daylight opening, and the overall sash dimensions before quoting anything. That’s the only way to match a Mr-Glass replacement correctly. We also keep quality aftermarket equivalents from CGI, PGT, and CWS in our shop for cases where the original Mr-Glass IGU was discontinued. We’ll tell you plainly whether an OEM Mr-Glass unit is still available or whether an aftermarket equivalent will match the sightlines and performance. TruePane is an independent service provider, not affiliated with Mr-Glass, which means we can say exactly that without a bias.
Signs Your Mr-Glass Window Replacement Is Failing
- Fog or haze between the glass panes that won’t wipe off. This is the classic failed-seal signature. The desiccant inside the IGU spacer has absorbed all the moisture it can hold, and condensation now lives permanently between your panes. No cleaning product will fix it. The IGU needs to be replaced.
- A draft you can feel around the sash on windy days. When a Mr-Glass sash warps slightly from years of Pompano Beach sun, the weatherstripping loses contact with the frame. You’ll feel it most in east-facing windows during afternoon sea breezes. A replacement IGU alone won’t fix this; the sash and weatherstripping need attention too.
- Condensation on the inside surface of the glass every morning. Some interior condensation is normal in a bathroom after a shower. But on a bedroom window in Pompano Beach in February, with the AC running, it means the thermal barrier is gone. The IGU is no longer insulating properly.
- A window that’s harder to open or close than it used to be. Mr-Glass sashes ride on a balance system that wears out over time. If you’re fighting the window, the balance mechanism is likely seized or the sash has shifted out of square. We address frame alignment when we install a replacement so the new glass isn’t fighting a crooked opening.
- Water staining on the interior sill or wall below the window. This one demands immediate attention. A failed glazing seal lets water in behind the frame, and in a Pompano Beach house that means mold and sill rot inside a year. The replacement is no longer optional at this point; it’s a repair you can’t afford to put off.
Replacement Cost & What’s Included
Installed Mr-Glass replacement pricing in Pompano Beach breaks down like this:
- Single IGU replacement (standard clear glass): $220 to $310 per window
- Low-E IGU replacement (energy-efficient coating): $290 to $390 per window
- Impact-rated IGU replacement (meets Broward County code): $360 to $480 per window
- Full sash replacement (when frame damage or balance failure is involved): $280 to $520 per window
What drives the range is glass type, IGU thickness, sash condition, and whether we’re dealing with a standard rectangle or something custom-cut. Every quote we give is line-itemed on paper before work starts. You’ll see the cost of the IGU, the labor, and any frame or balance work listed separately. The price we quote is the price you pay, no surprise line items on the bill. The Done Right Promise covers the installation; if something isn’t right, we make it right without paperwork fights. And per The Keystone Standard, both manufacturer warranty layers are registered in writing before the truck leaves your driveway. If it isn’t in writing, it isn’t a warranty.
DIY or Call Us?
Replacing an IGU in a Mr-Glass sash is not a weekend project. The sash has to come out, the glazing bead has to be removed without cracking it, the old IGU has to be measured precisely, and the new unit has to be set square in the opening with the right setting blocks. Get any of that wrong and the new IGU will fail early, the sash won’t seal, or the bead will crack when you reinstall it. That’s a lot of money to spend on a mistake.
What you can safely do is identify the problem. Check for a fogged interior that won’t wipe clean. Check for a wobbly sash or a visible gap in the weatherstripping. Check the corner of the glass for the Mr-Glass series code if it’s still legible. Then call us with what you’re seeing and we’ll give you an honest read on what you’re likely dealing with before we ever schedule a truck. Most Mr-Glass replacements in Pompano Beach are handled in a single visit, and we’ll be there when we say. Call (863) 591-8673 for an exact quote; estimates are free.
FAQs
In most Pompano Beach homes, Mr-Glass IGUs last 12 to 18 years before the seal fails, depending on sun exposure and proximity to salt air. East-facing units near the Intracoastal tend to go first, often 10 to 14 years. We’ve replaced Mr-Glass units in the Highlands that made it past 20, but those are the exception. If your windows are approaching that range and starting to fog, the clock is running. Call (863) 591-8673 and we’ll tell you what you’re looking at.
No, a failed seal cannot be repaired in place. The IGU is a factory-sealed unit, and once the seal is gone, the only correct fix is a new IGU. Companies that offer “defogging” services drill holes in the glass and inject chemicals, which is a temporary cosmetic fix that leaves you with a compromised unit and a hole in your sash. We won’t do that to your window. Call (863) 591-8673 for a quote on doing it right.
Most single-window Mr-Glass replacements take 45 to 90 minutes on site once we’re there. We carry common IGU sizes on the truck, so if your window is standard, we can often handle it in one visit. Custom-cut units may take us a few days to fabricate, but the installation itself is still under two hours. We’ll tell you the timeline before you commit to anything.
We stock common Mr-Glass IGU sizes and balance components on our trucks and in our Pompano Beach shop. We also keep aftermarket equivalents from PGT, CGI, and CWS for discontinued Mr-Glass lines. If your unit is an odd size or needs custom fabrication, we’ll order or cut it and schedule you as soon as it’s ready. Call (863) 591-8673 and we’ll tell you what’s in stock for your specific window.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.