Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Impact Windows in Pompano Beach: What to Know First
TruePane Windows & Doors installs and services Therma-Tru impact windows throughout Pompano Beach as an independent Therma-Tru service provider. We’re not affiliated with Therma-Tru, and we don’t pretend to be. Most Therma-Tru impact window replacements take one to two days on site once the units arrive, and our pricing runs mid-market for Broward County: not the cheapest bid you’ll get, but a written quote with both warranty layers registered before our truck leaves your driveway.
This page is for homeowners in Pompano Beach who already own Therma-Tru doors or windows and need impact-rated replacements, or who are weighing Therma-Tru against other lines. If you want a straight answer about whether your existing Therma-Tru units can be repaired or need replacement, call (863) 591-8673 and a live person will answer.
Key takeaways:
- We service and install Therma-Tru impact windows as an independent provider, not a factory-authorized dealer.
- Parts decisions are made in front of you: OEM where warranty matters, quality aftermarket where it doesn’t.
- Every quote is line-item on paper. Both warranty layers get registered in writing before we leave.
- Free estimates. No surprise line items. We’ve served Pompano Beach and Broward County since 2008.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid door. The failure modes we see in Pompano Beach are almost never the fiberglass skin itself. They’re the joints, the seals, and the hardware interfaces, and salt air finds every one of them. Here’s what actually goes wrong on Therma-Tru units in this climate, and what we do about it.
- Frame-to-sill seal failure on Classic-Craft and Smooth-Star entry systems. Pompano Beach humidity gets behind the sill cap and rots the sub-sill from the inside out. The homeowner sees a door that binds in July and lets a draft through in January. The real cause is usually the original installer caulking the interior face only and leaving the exterior weep path blocked. We pull the unit, correct the sill pan, and reset it with a sloped pan and backer rod before re-caulking both faces.
- Glazing bead shrinkage on Therma-Tru patio door Systems. The factory bead on older Therma-Tru sliding patio doors shrinks under Florida sun exposure and pulls away at the corners. Water gets behind the glass pack and sits in the lower rail. You won’t always see the water; you’ll smell it. We replace the bead with a UV-stable aftermarket profile and re-bed the glass, which solves the problem without replacing the entire door.
- Impact glass delamination at the corners on early generation Therma-Tru impact units. Units from the first wave of Therma-Tru impact-rated glazing sometimes show a milky haze forming at the corners, which is delamination between the glass and interlayer. It’s cosmetic at first, but it spreads and eventually compromises the impact rating. The fix is a full sash or panel replacement with current-generation impact glass, which we order to the exact original dimensions.
- Threshold wear on Fiber-Classic entry doors. The adjustable threshold on Fiber-Classic models works fine until Pompano Beach grit and sand work into the adjustment screws and strip them. Owners call thinking they need a whole new door. Most of the time we replace the threshold insert and hardware, re-level the panel, and the door is tighter than the day it went in.
- Hardware misalignment from hurricane-season settling. After a few hard storm seasons, Therma-Tru doors in Pompano Beach shift in their rough openings and the deadbolt no longer aligns with the strike. This is a frame-level fix, not a hardware fix. We re-shim the jamb, re-check the reveal, and reset the panel so the multi-point lock engages on the first try, the way it should.
Our Therma-Tru Impact Windows Process
Here’s how a Therma-Tru impact job runs with us, from the first call to the final walkaround.
- 1
Call and talk to a person. You call (863) 591-8673, a live person answers, and we schedule a measurement visit at a time you name. No phone tree.
- 2
We measure twice. The technician measures every opening twice and photographs each one. If the opening is out of square, we note it on paper so there are no surprises at installation.
- 3
We lay out your options side by side. OEM Therma-Tru where the warranty matters, quality aftermarket where it doesn’t. You get line-item pricing on paper so you can see exactly what you’re paying for.
- 4
We do the work. Out-of-true openings get corrected before the new unit goes in. The unit is set level and square, sealed against Pompano Beach heat and salt, and flashed to drain.
- 5
We test, then register. We operate the unit through full cycles, check the seals, and register both warranty layers in writing before the truck leaves the driveway.
- 6
Ninety days later, it’s still our job. If anything is not done right, the Done Right Promise means we come back and make it right. No paperwork fights.
What Therma-Tru Impact Windows Costs in Pompano Beach
Therma-Tru impact window replacement in Pompano Beach runs between $900 and $2,400 per opening for standard sizes with impact-rated glass, installed. Custom sizes, second-story access, and full-frame replacements with rotted rough openings push the high end. Here’s a breakdown of common Therma-Tru scenarios we quote in Broward County:
- Single impact-rated Therma-Tru replacement window (standard size): $900 - $1,400
- Therma-Tru impact sliding patio door replacement: $2,800 - $5,500 depending on glass package and track condition
- Threshold replacement and door re-leveling (Fiber-Classic or Smooth-Star): $350 - $700
- Full-frame impact window with opening correction: $1,400 - $2,400
What moves the price: the size of the unit, whether the existing frame is square and sound, the glass package (standard impact versus high-VLT low-E), and whether we’re doing a pocket replacement or a full-frame tear-out. Call (863) 591-8673 for a free estimate. We’ll walk the job with you and write the numbers down.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve been setting windows and doors in Broward County since 2008, and we plan to be here in thirty more. That changes how we approach a Therma-Tru job. We’re not trying to close a sale and disappear; we’re trying to do the work once and have you call us back for the next window. If the pane is not true, the job is not done. That’s the rule Dale Kessler keeps on the whiteboard, and every technician who works under our name knows it.
We’re also authorized installers for PGT, CGI, CWS, and ES Windows, so if a Therma-Tru unit isn’t the right answer for your opening, we’ll tell you and show you a better option on paper. The Keystone Standard means both warranty layers registered in writing, durations stated, before we leave your driveway. If it isn’t in writing, it isn’t a warranty.
FAQs
We can perform warranty-eligible work, but the warranty claim itself goes through Therma-Tru’s process, and as an independent service provider we don’t process claims on the homeowner’s behalf. What we do is make sure the installation and any replacement parts we supply don’t void your existing warranty. We document everything in writing. Call (863) 591-8673 and we’ll walk you through what your warranty actually covers on your specific unit.
For the door slab and impact glass, yes, OEM is the right call, and that’s what we recommend. For wear items like thresholds, sweeps, and glazing beads, a quality aftermarket part often outperforms the original and costs less. We’ll show you both options on paper and tell you which one we’d put in our own home.
Most single-opening replacements take one day on site. Full multi-unit jobs typically run two to three days depending on access and what we find when the old units come out. We schedule the work around your calendar, not ours, and we’ll be there when we say we’ll be there.
Sometimes, yes. If the frame is sound and the issue is a failed seal, worn hardware, or a threshold problem, we can repair the existing unit for a fraction of replacement cost. If the impact glass itself is compromised or the frame has rot, replacement is the honest answer. We’ll tell you which it is after we look, and we won’t sell you a replacement you don’t need. Call (863) 591-8673 to schedule a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.