Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Impact Windows in Pompano Beach: What to Know First
ViewLux impact windows in Pompano Beach can be repaired and replaced by an independent service provider, and most single-unit jobs are completed the same day we arrive. TruePane Windows & Doors is not affiliated with or authorized by ViewLux, but we know their product lines well enough to fix what fails, replace what can’t be saved, and register the warranty paperwork before we leave the driveway. Repair work typically runs $180-$340 for common hardware and seal issues; full unit replacement with impact-rated glass starts around $1,100 and climbs with size and finish. If you own a ViewLux window or door and it’s not holding a seal, binding, or rattling in the frame, call (863) 591-8673 and we’ll tell you honestly whether it’s worth repairing or replacing.
This page is written for ViewLux owners in Pompano Beach who want straight answers about their specific product, not a generic sales pitch. We’ll cover how these windows fail, what it costs to fix them, and what we do differently on a ViewLux job.
How ViewLux Products Fail - and How We Fix Them
Most ViewLux impact windows we see in Pompano Beach were installed between 15 and 25 years ago, and they fail in predictable ways. Here’s what we actually find when we open one up:
- Seal failure on the Series 800 fixed and picture units. The laminated impact glass itself is usually fine, but the factory seal between the panes loses integrity after enough salt-air exposure. You’ll see fogging or condensation between the glass that never clears. The fix is replacing the insulated glass unit, not the whole frame, which usually runs $350-$600 installed depending on size.
- Roller and track wear on ViewLux horizontal sliders from the early 2000s. The original nylon rollers were never rated for daily use plus the weight of laminated impact glass. They flatten over time, and the sash starts dragging or hanging up on the track. We replace the rollers with heavier aftermarket stainless or upgraded nylon sets, adjust the track, and the window slides like it did when it was new.
- Hardware failure on casement and awning crank units. The zinc-alloy crank gears on some ViewLux casement windows corrode faster here than the manufacturer’s install literature suggests. Salt air gets into the crank housing and the gears strip. If the crank is original, we recommend replacing the entire operator assembly rather than just the handle, because the internal gears are usually the actual point of failure.
- Weep hole blockage on single-hung and sliding units. This is a Pompano Beach-specific problem. ViewLux frames have weep holes at the sill to drain water, but between pollen, sand, and the kind of relentless humidity we get off the Atlantic, those holes clog. Water pools in the track, seeps past the weatherstripping, and stains the interior sill. We clean the weep system, reseal the frame at the jambs, and replace the weatherstripping if it’s swollen or cracking.
- Frame bowing on larger fixed impact units installed without proper header support. We see this regularly in older Pompano Beach homes where the original window opening wasn’t reinforced when the impact glass went in. The frame bows under the weight of the laminated glass, and the sash binds or the seal breaks at the corners. If the bow is minor, we can sometimes reset and shim the unit. If the opening itself is out of true, the real fix is reframing that section of wall before reinstalling the window. Patching it won’t hold.
Our ViewLux Impact Windows Process
Here’s what a ViewLux job actually looks like when you call TruePane:
- 1
Call and talk to a person. You call (863) 591-8673, a live person answers, and we ask the right questions: what the window is doing, when it started, what model or series you have if you know it, and which side of the building the problem is on. We don’t route you through a call center.
- 2
We inspect in person. A uniformed, background-checked technician comes to your Pompano Beach home, measures every opening twice, and identifies the exact failure. We look at the seal, the hardware, the track, the weep system, and the frame alignment.
- 3
We discuss the parts decision with you. Where OEM ViewLux parts are available and still the best option for your warranty, we use them. Where an aftermarket part is demonstrably better, like a heavier roller assembly or a stainless crank gear, we tell you why and give you the choice. You see the exact spec sheet before anything is ordered.
- 4
We do the repair or replacement. We set the new glass, replace the hardware, or reset the frame, using shims and sealant rated for coastal exposure. Every opening gets verified for level and plumb before we finish.
- 5
We test the unit. The sash gets opened and closed repeatedly. The seal gets inspected under light. We check the weep drainage with a small amount of water. If the pane is not true, the job is not done.
- 6
We hand you the paperwork. Both warranty layers are registered in writing before the truck leaves the driveway. You know exactly what’s covered, for how long, and who to call.
What ViewLux Impact Windows Cost in Pompano Beach
| Service | Typical Range |
|---|---|
| Hardware replacement (crank, roller, lock) | $180-$340 |
| Insulated glass unit replacement (seal failure) | $350-$600 installed |
| Weatherstripping and weep system service | $120-$250 |
| Full impact window replacement (standard size, single-hung or slider) | $1,100-$2,800 per unit |
| Full impact window replacement (large fixed or custom opening) | $2,500-$5,500 per unit |
What moves the price is size, finish, whether the frame can be saved, and whether the opening itself is out of true and needs reframing. We don’t pad quotes. We show you the manufacturer lines side by side on paper before you spend a dollar, and the number we quote is the number you pay. Call (863) 591-8673 for a free estimate on your specific ViewLux unit.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for ViewLux Work
We’re a second-generation glazing company, not a franchise playbook. Dale Kessler grew up in the Pompano Beach Highlands and spent enough summers watching salt air eat through poorly sealed frames to understand what bad glazing work actually costs a homeowner over time. We trained in the building trades program at Broward College, and we read spec sheets before we sell anything.
Every ViewLux job we take on is covered by our Done Right Promise: if it’s not done right, we make it right, no paperwork fights and no arguing. We register both warranty layers in writing before the truck leaves. And when a ViewLux unit can’t be saved economically, we’ll tell you that plainly and quote you comparable impact-rated lines from PGT, CGI, CWS, or ES Windows so you can make an informed decision about what goes in next.
We’ve been serving Broward County since 2008. We plan to be here in thirty more. A live person answers every call, 24 hours a day, 7 days a week. You’ll never leave a voicemail and wait for a callback.
FAQs
Work performed by an independent contractor does not automatically void your ViewLux warranty, but the manufacturer may reject a claim if the failure resulted from improper installation or incompatible aftermarket parts. We register both warranty layers in writing on every job and document the work so you have a paper trail if a claim ever comes up. As Dale Kessler puts it: if it isn’t in writing, it isn’t a warranty. Call (863) 591-8673 and we’ll walk you through what your specific warranty actually covers.
Most common hardware like rollers, cranks, and locks for ViewLux units is available locally or within a few days through our supplier network, and most jobs are completed in a single visit. For sealed glass units, we typically schedule replacement within one to two weeks depending on size and glass makeup. Call (863) 591-8673 and we’ll give you a straight timeline for your specific unit before you commit to anything.
The honest answer depends on the frame condition, the age of the unit, and whether the failure is isolated or systemic. If the frame is square, the opening is true, and the issue is a failed seal or worn hardware, repair almost always makes more sense. If the frame is bowing, the weep system is corroded through, or two or more windows in the house show the same problem, replacement may be the smarter long-term move. We’ll tell you which one we’d do in our own home, then quote both options side by side so you decide. Estimates are free. Call (863) 591-8673.
Yes. We come out, measure every opening twice, inspect the existing units, and give you a written quote with no obligation and no pressure. The price we quote is the price you pay, with no surprise line items added later. Call (863) 591-8673 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.