Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Hillsboro Beach
Custom windows and doors in Hillsboro Beach aren’t a cosmetic upgrade. They’re a structural requirement. This town is a half-mile-wide barrier island with the Atlantic on one side and the Intracoastal on the other, which means every opening in your home is hit by salt spray from two directions and has to meet Broward County’s High Velocity Hurricane Zone standards. We’ve worked on enough Hillsboro Beach homes to know exactly what that means: Miami-Dade NOA documentation, marine-grade finishes, and a permit pulled before the next storm season arrives. TruePane has been doing this work since 2008. Call (863) 591-8673 and we’ll walk you through what your house actually needs.
Why TruePane Windows & Doors Is Hillsboro Beach’s Preferred Custom Windows & Doors Company
Hillsboro Beach homeowners don’t shop for windows the way people in Pompano Beach or Coconut Creek do. Here, the question isn’t usually “what does a window cost” but “will my insurer renew me if I don’t replace this.” We know that because we get those calls. A homeowner on Hillsboro Mile gets a letter from their carrier demanding proof of Miami-Dade NOA compliance, and suddenly a custom window isn’t a design conversation, it’s a deadline. We’ve been through that process enough times to handle the paperwork, the permit, and the installation in the right order, without making the homeowner chase documents.
Our techs know the failure patterns on this island. Salt fog from Hillsboro Inlet eats aluminum sashes, seizes multi-point locking hardware, and fogs insulated glass units in a couple of years when the seal fails. That’s not a guess. It’s what we see when we pull a 1970s slider out of a house off Hillsboro Mile and find the weep holes plugged with salt deposits. We hire local, we train apprentices into journeymen, and the person who answers our phone is a live human being, not a voicemail tree. That matters when your insurer gives you 60 days to have a documented, compliant installation completed.
Every job we take on gets the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. Dale Kessler founded this company on a rule: if the pane is not true, the job is not done. That rule applies to a $400 repair and a $40,000 custom window package the same way.
Our Custom Windows & Doors Services in Hillsboro Beach
We install Custom Windows & Doors that fit the way this island actually lives. Not every manufacturer wants to deal with a half-mile-wide barrier island’s code requirements. We do. Here’s what we handle most often in Hillsboro Beach:
Custom Shape Windows
Half-rounds, hexagons, ovals, and radius-top windows need a frame that won’t warp in brackish air and glazing that carries the right NOA number. We measure every opening twice, quote manufacturer lines side by side on paper, and order the shape you actually need, not the closest stock size. That matters when you’re replacing a jalousie opening in a 1970s condo and the architect has a specific sightline in mind.
Architectural Grilles & SDLs
Simulated divided lites on Hillsboro Beach get hit with the same salt fog as everything else. We spec marine-grade finishes on grilles and SDLs a block from the Hillsboro Inlet because standard powder coat doesn’t hold up here. The SDL bars get ordered in the same finish schedule as the frame, and we register the finish warranty in writing so a pitted grille two years later is the manufacturer’s problem, not yours.
Oversized Glass Panels
A 12-foot picture window facing the Atlantic has to do more than look good. It has to carry a U-factor of 0.30 or lower, hold argon fill for years, and survive a Category 4 impact test. We order oversized panels with thermally broken frames and we don’t skip the low-E coating. Too many Hillsboro Beach homeowners find out on the first humid winter that a contractor who cut costs on glass wound up with condensation inside the cavity. We don’t build that problem.
Commercial Storefront Glazing & Curtain Wall Systems
The condo associations and small commercial buildings on Hillsboro Beach need glazing that meets HVHZ standards without looking like it belongs on a warehouse. We handle storefront systems and curtain walls for mid-rise buildings on the island, and we coordinate with the association’s engineer before we order so the submittal doesn’t bounce back. You’d be surprised how many times a curtain wall order stalls because nobody checked the NOA approval on the exact frame profile.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hillsboro Beach
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. In Hillsboro Beach specifically, we do a lot of work with CGI, CWS, and ES Windows because these are the lines with deep Miami-Dade NOA coverage and proven track records in High Velocity Hurricane Zones. We carry local parts inventory for these brands so a seized lock or failed gasket doesn’t sit for weeks while the homeowner waits on a freight shipment. When a Hillsboro Beach customer asks us to quote two or three brands side by side on paper, we do exactly that. You should see what you’re buying.
Common Custom Windows & Doors Problems We See in Hillsboro Beach Homes
- Salt-destroyed aluminum sashes and frames. Homes built during the 1960s to 1990s boom on the island used single-pane aluminum sliders that were never designed for persistent salt exposure. Within 18 to 24 months of exposure to inlet salt fog, we see pitting, oxidation, and seal failure around the insulated glass unit. Fog between panes isn’t a cleaning problem; it’s a failed seal that will spread.
- Seized multi-point locking hardware on impact doors. The same salt that corrodes aluminum clogs the internal tracks of multi-point locks. A door that requires two hands and a shoulder to open on Hillsboro Mile has hardware that’s been eaten from the inside. Trying to force it usually breaks the gearbox entirely.
- Non-compliant original glazing and insurance ultimatums. We regularly get calls where the homeowner isn’t remodeling at all. They just received a notice that their policy won’t renew unless they install NOA-compliant impact windows or doors with documentation. On a barrier island with extreme storm surge risk, insurers are not flexible about this.
- Condensation inside oversize panel cavities. Designers and architects on Hillsboro Beach specify huge glass panels with U-factor targets of 0.30 or lower. Without argon fill and a thermally broken frame, humidity condenses on the interior lite within the first winter. By the time the homeowner notices, the glass unit is compromised.
Pricing for Custom Windows & Doors in Hillsboro Beach, FL
A custom window or door on Hillsboro Beach runs higher than the same opening in Pompano Beach or Coconut Creek. The reasons are specific: the product has to carry a Miami-Dade NOA number, the finish has to be marine-grade, and the install has to be documented for insurance. Here’s what we see on current work:
- Custom shape windows: $1,100-$3,400 per unit, depending on shape complexity, glass package, and whether the opening needs reframing. Radius tops and true ovals cost more than half-rounds.
- Architectural grilles & SDLs: $180-$700 per window added to the base window cost. Marine-grade finish options run on the higher end. Interior SDLs cost less than exterior-graded bars.
- Oversized glass panels (8 feet and wider): $4,500-$14,000 per panel installed. The price is driven by glass thickness, impact rating, crane or lift access, and whether the opening is on the second story with Atlantic exposure.
- Commercial storefront glazing: $85-$160 per square foot installed, depending on frame depth, glass type, and whether the opening is at grade or requires staged access.
- Curtain wall systems: $110-$210 per square foot, with engineering stamps and submittal coordination included. Condo association work on the island typically requires extra review cycles, which we handle.
We give a written, line-item quote before any work is ordered. The price we quote is the price you pay, and we register both warranty layers in writing before the truck leaves. Call (863) 591-8673 for a free estimate. We’ll come out, measure every opening twice, and put the numbers in front of you so you can decide.
We Also Serve Cities Near Hillsboro Beach
Our crews work across the Broward County coast, including Custom Windows & Doors in Hillsboro Beach proper, plus Pompano Beach, Coconut Creek, Lauderdale-by-the-Sea, and Lighthouse Point. If you’re a few miles inland and wondering whether your house carries the same wind load requirements, call us. The answer is usually no, which means the spec changes. We’ll tell you straight.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Hillsboro Beach
Yes, because Broward County’s High Velocity Hurricane Zone designation applies to the entire town, not just the oceanfront line. Hillsboro Beach is a barrier island with no inland buffer, so wind-driven debris can hit a window on the Intracoastal side with nearly the same force as one on the Atlantic side. The NOA requirement isn’t based on what side of the house the opening sits on, it’s based on the jurisdiction. If your contractor tells you a non-NOA window is fine because it faces west, call us for a second opinion. Call (863) 591-8673 and we’ll pull the current code requirements for your specific address.
Marine-grade, full stop. Standard powder coat on grilles and SDLs within a block of Hillsboro Inlet starts pitting inside 18 months because the salt fog concentration there is the most aggressive on the Florida east coast. We specify a marine-grade finish schedule on every architectural grille and SDL order for Hillsboro Beach, and we register the finish warranty in writing with the manufacturer. A pitted grille two years after install is a warranted finish failure, and we handle the claim. Call (863) 591-8673 and we’ll show you the finish options with photos from past island jobs.
A fixed, written quote before the order goes in. Lead times on oversized custom panels run 12 to 16 weeks from most manufacturers right now, but that doesn’t mean the price floats. We quote the panel, the crane or lift access, the structural framing, and the permit as a line-item total, and that number is locked when you sign. The only variable that can change the price is if you change the glass spec after the order is entered. On Hillsboro Beach, where a 14-week lead time means any change order pushes you past the next storm season, we’d rather take an extra week to get the spec right than rush an order. Call (863) 591-8673 for a written quote on your specific opening.
Yes. Jalousie openings from that era are almost always non-standard sizes, and the original aluminum frames are universally corroded on Hillsboro Beach. We template the opening, match the rough opening dimensions with a custom manufactured window, and install an impact-rated unit that carries the correct NOA. The finished window won’t look like a jalousie, but it will fill the exact opening with no stucco or drywall modification. Many condo associations on the island now require impact-rated replacements when jalousies are removed, and we handle that documentation as part of the job. Call (863) 591-8673 and we’ll measure the opening and tell you what’s possible.
Because insurers writing policies on Hillsboro Beach properties have been tightening hurricane-exposure requirements for years, and a 1990s townhouse almost certainly has original single-pane sliders or non-impact aluminum windows that don’t meet current HVHZ standards. Storm surge risk on a half-mile-wide barrier island is extreme, and the insurer knows that. The demand for documentation isn’t a suggestion. It’s a condition of renewal, and if you don’t produce proof that your windows and doors carry Miami-Dade NOA approval, your policy doesn’t renew, period. We handle documentation on every install: permit pulled, NOA numbers recorded, both warranty layers registered in writing. Call (863) 591-8673 and we’ll tell you exactly what your insurer needs to see.
Call TruePane for Custom Windows & Doors in Hillsboro Beach
If you live on Hillsboro Beach and you need a custom window or door done right, call (863) 591-8673. We’ll send a background-checked, uniformed technician to measure every opening twice, quote the job in writing, and register both warranty layers before the truck leaves your driveway. Dale Kessler put the rule on the whiteboard for a reason: if the pane is not true, the job is not done. That’s the standard, on a half-mile barrier island, where there’s no room for a redo.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hillsboro Beach with custom window and door installations that meet the strictest code in the country.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.