Awning Windows

Awning Windows in Pompano Beach, FL | TruePane Windows & Doors

Awning windows are the top-hinged, crank-out workhorses of Florida architecture. They open outward from the bottom, which means you can leave them cracked during a summer downpour without water pouring onto your sill. For Pompano Beach homeowners, that’s not a nice-to-have. That’s the difference between stale, air-conditioned air and a fresh cross-breeze in July. TruePane Windows & Doors supplies and installs impact-rated awning windows across Broward County, and we anchor every opening to the Florida Building Code’s High-Velocity Hurricane Zone standard. Whether you’re replacing corroded 1980s frames in Garden Isles or building new in Lighthouse Point, this is a window profile we know cold. Call (863) 591-8673 to talk through your opening sizes and glass needs.

Call (863) 591-8673

Product Overview - Awning Windows

An awning window hinges at the top, not the side or bottom. The sash cranks outward, forming a sloped glass canopy over the opening. In Pompano Beach, that geometry does real work. Rain strikes the glass and runs off the drip edge rather than finding its way inside, so the window stays functional as ventilation even when the afternoon storms roll through. It pairs naturally with fixed picture windows or casements, and it’s the profile we recommend most for kitchens, bathrooms, and any wall where you want airflow without sacrificing privacy or weather protection.

Our impact series builds that profile around laminated impact glass: two panes bonded with a PVB interlayer that holds the glass in the frame if something strikes it. The frame is engineered to carry that glass through a storm cycle without racking or leaking. We sell awning windows across aluminum and vinyl frame platforms, which gives you a real choice between a slimmer, stronger sightline and a thermally efficient, lower-maintenance alternative. In a coastal market like Pompano Beach, both have their place. The common thread is this: every configuration we quote is built to the design pressure your wind zone actually requires, not a generic rating.

Technical Specifications

The right awning window for a Pompano Beach home depends on opening size, exposure, and budget. Here’s what we configure, in plain terms.

• Frame materials: Aluminum (slimmer profile, excellent structural strength in wide spans) and Vinyl (thermal break built in, minimal maintenance, strong corrosion resistance).
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, and clear glass. Laminated impact is the default for any opening required to meet HVHZ code. Low-E and tinted options layer energy performance and glare control onto that base.
• Finish options: White, Almond, Bronze, Black, and Tan. All are applied as a factory finish rated for coastal UV exposure, not a field-applied coating.
• Screen options: Fixed screen or retractable screen. Fixed screens mount to the interior or exterior frame. Retractable screens roll away when you don’t want them visible.
• Operation: Manual crank-out. The crank mechanism is mounted below the sash for easy reach over counters and in taller windows.

Hurricane & Compliance Performance

What makes an awning window a Florida awning window? The following six features matter most when a Pompano Beach permit is on the line.

Laminated Impact Glass
Two panes of glass are bonded with a PVB interlayer. When a branch, tile, or other flying debris strikes the glass, the interlayer holds the shattered pieces in the frame instead of letting them blow into the room. That’s the core of the impact rating.

Miami-Dade NOA / Florida Product Approval
Each configuration we supply carries a Notice of Acceptance or Florida Product Approval number. These are issued per specific frame, glass, and size combination. We call out the applicable number on your quote so your permitting package is clean from day one in the City of Pompano Beach.

FBC / HVHZ Compliance
Awning windows we install in Pompano Beach are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the stricter of Florida’s two wind-load standards and the one Broward County jurisdictions enforce without exception.

TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products are tested under this protocol family: TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). These tests simulate what a window actually faces in a hurricane, not just a single hard impact in a lab.

Design Pressure Matched to Your Wind Zone
We quote design pressures matched to your specific wind zone, up to +/-100, and we never spec higher than the building requires. Over-specifying inflates the price without adding protection your elevation and exposure don’t demand. Under-specifying fails the permit review. We cut it precisely.

Low-E / Insulated Glass Options
For east- and west-facing walls in Pompano Beach, Low-E insulated glass cuts solar heat gain while the laminated impact layer does its storm work. It brings the awning profile into line with the energy performance side of the Florida Building Code, too.

Color & Glass Options

Awning windows in Pompano Beach sit at eye level on kitchens, baths, and lanai walls, so the finish reads as part of the trim and the glass tints the room. The five factory finishes we offer each suit a different exterior language. White and Almond disappear into stucco homes and mid-century ranches in Cresthaven. Bronze and Black add contrast against lighter stucco and pair well with dark roof lines on newer construction. Tan works best on Mediterranean-style elevations where olive and earth tones dominate the palette.

The glass choice is driven by where the window faces and what you’re protecting. Clear laminated impact glass gives you the truest light and is the standard spec for north-facing walls. Tinted glass knocks down glare on east and west exposures, which matters in Pompano Beach when the late-afternoon sun comes off the water. Low-E insulated glass delivers the most comfort for rooms you use all day, with the PVB interlayer doing double duty as both impact protection and UV filtration.

Installation by TruePane Windows & Doors in Pompano Beach

An impact window is only as good as the opening it’s set into. A Miami-Dade NOA is issued for the product as a system, and that system assumes the installation was done to spec. We don’t skip steps, and we don’t let a hurried third-party crew decide how your window is waterproofed. Our installation practice in Pompano Beach follows AAMA 2400/2410 standards, which govern how a window is set and flashed in the opening.

The process begins before we order glass. We pull the old window, measure the rough opening in three places, and check the condition of the rough sill and any rotted framing. If the substrate isn’t sound, we repair it before the new unit goes in. The window is set level, plumb, and square, then shimmed so the sash operates smoothly and the weatherstripping seals evenly. Perimeter voids are filled with AAMA 812 low-expansion foam and sealed to keep water out. After casing and trim, we water-test the installation and adjust the crank until the seal is tight.

Pompano Beach brings its own set of installation considerations. Coastal exposure means we specify fasteners and flange materials rated for salt air. The City of Pompano Beach requires Florida Product Approval documentation for any structurally glazed opening, and we flag the approval numbers on your submittal before you pull the permit. Improper installation compromises the entire NOA-rated system. It’s the most common way a good window goes bad, and it’s the reason a professional install is non-negotiable here.

Frequently Asked Questions - Awning Windows

What wind zone / design pressure is the Awning Window rated for?
Every awning window we quote in Pompano Beach is engineered to Florida Building Code High-Velocity Hurricane Zone requirements, with design pressure matched to your specific wind zone, up to +/-100. We never quote a lower pressure than the elevation requires, and we don’t sell you a higher one to inflate the cost. Call (863) 591-8673 and we’ll pull the zone for your address.

What is the lead time for awning windows?
Lead times vary by frame material, glass type, and size. Our impact awning windows are built to order per opening, not pulled off a shelf, so the window is made for your rough opening and your permit. Once we measure and finalize glass and finish, we’ll give you a firm production schedule. Call (863) 591-8673 and we’ll walk you through what’s currently in production.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. The City of Pompano Beach and Broward County require product approval documentation for any opening in the high-velocity hurricane zone. The awning window configurations we supply carry NOA or Florida Product Approval numbers per configuration, and we include the applicable number on your quote and submittal package. We’ve gone through this permitting process in Pompano Beach hundreds of times. Call (863) 591-8673 for help with your specific opening.

Can I customize the size or configuration?
Most awning windows are sized to the rough opening, and we order to the inch from the frame manufacturer. That includes custom widths, mulled combinations, and fixed-awning hybrids. In Pompano Beach, there’s no standard awning width, because every home here seems to have a different wall length. Call (863) 591-8673 with your rough measurements and we’ll tell you what’s feasible.

How do I maintain the frame and crank mechanism?
Rinse the frame and track with fresh water every few months to keep salt and sand from accumulating, and wipe the weatherstripping so it doesn’t dry out. The crank mechanism wants a small amount of silicone spray on the gear once a year, especially in coastal air. Wipe the sash with mild soap and water. Don’t pressure-wash the window, because the forcing can damage the seal between the frame and glass. If the crank gets stiff, call us before forcing it. Call (863) 591-8673 and we’ll service it.

Get a Quote - Awning Windows in Pompano Beach

Ready to see what a proper awning window looks like in your opening? We’ll measure, spec the right design pressure and approval number, and give you a written line-item quote with no surprises on install day. Call (863) 591-8673 to schedule your free on-site measurement in Pompano Beach.

Written by the team at TruePane Windows & Doors, serving Pompano Beach and Broward County with hurricane-impact windows and doors.