French & Double Doors

French & Double Doors in Pompano Beach, FL | TruePane Windows & Doors

French and double doors bring symmetry, light, and an easy flow between indoor and outdoor living. In Pompano Beach, where patios, lanais, and pool decks are part of daily life, these paired impact-rated doors do double duty: they open up the back of the house while standing up to the wind loads and debris impacts our hurricane season delivers. TruePane Windows & Doors sells and installs these across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. We measure, order, and install for homeowners across Pompano Beach who want the look without compromising on code. Call (863) 591-8673 to schedule a free on-site measurement.

Call (863) 591-8673

Product Overview - French & Double Doors

These are paired impact-rated French doors with laminated glass in every lite. That last part matters. The symmetrical sightlines stay clean because the glass itself carries the impact rating, not a bulky external shutter or removable panel you have to store somewhere. You get two doors that swing open wide for entertaining, or one active leaf for daily use, with multi-point locking hardware that engages at the head, sill, and meeting stile.

The construction is built around the realities of South Florida. Frames come in aluminum or vinyl, both suited to the salt air and humidity we get in Pompano Beach. The engineering focuses on stiffness and positive drainage, because a door that racks or holds water at the threshold will fail long before the glass ever does. We see these installed most often on rear elevations leading to covered patios, pool areas, and outdoor kitchens, but they also work beautifully on front entries when the home’s architecture calls for a centered, formal opening. Maximum width runs up to 96 inches, which covers most standard double-door rough openings in Pompano Beach homes built from the 1960s onward, as well as new construction.

What separates a door that lasts from one that becomes a service call is the installation. TruePane Windows & Doors sets every unit level, plumb, and square, then seals the perimeter properly so the NOA-rated system performs the way it was tested. Call (863) 591-8673 and we’ll walk you through the options for your opening.

Technical Specifications

• Frame materials: Aluminum or vinyl, selected for coastal durability and thermal performance.
• Maximum size: Up to 96 inches wide, configured to your rough opening.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass.
• Finish options: White, almond, bronze, black, tan.
• Locking hardware: Multi-point locking system engaging at multiple points along the frame.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration.
• Design pressure: Matched to your wind zone, up to +/-100. We never spec a higher DP than the opening requires; over-specifying costs you money without adding protection.

Hurricane & Compliance Performance

Laminated Impact Glass - Every lite in these French and double doors uses laminated glass with a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack but the interlayer holds the broken pieces in the frame. That keeps wind and water out and prevents the sudden pressure spike that blows roofs off. It also stays in place between storms, so there’s no annual installation ritual.

Miami-Dade NOA / Florida Product Approval - TruePane Windows & Doors can provide NOA and Florida Product Approval numbers for the specific configuration you order. These are issued per configuration, so we verify the exact numbers on your quote before you sign. If your Pompano Beach permit requires a submittal, we include the documentation with your order package.

FBC / HVHZ Compliance - These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Pompano Beach sits squarely in the HVHZ, which carries the strictest wind and impact standards in the state. A door labeled “impact-rated” without HVHZ compliance won’t pass inspection in Broward County.

TAS Testing Context - The HVHZ-rated product family is tested under the TAS protocol series: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These simulate what a real storm throws at your door: a two-by-four at speed, repeated pressure cycles, and someone trying to get through after the storm.

Design Pressure for Your Wind Zone - We match the design pressure to your specific wind zone, up to +/-100, and no more. A door over-engineered beyond your zone costs extra without adding meaningful protection. A door under-specified will flex, leak, or fail. We calculate based on your home’s location in Pompano Beach, exposure category, and opening dimensions.

Energy Performance - Low-E and insulated glass options are available for these doors. In Pompano Beach’s climate, Low-E coatings reduce solar heat gain on west- and south-facing openings without noticeably darkening the view. Insulated glass adds a thermal break and helps with condensation control. We’ll help you choose based on which direction your door faces and how much sun the opening gets.

Color & Glass Options

The finish options we offer are white, almond, bronze, black, and tan. These five cover nearly every architectural style in Pompano Beach. White and almond suit the classic Florida ranch and coastal cottage look. Bronze and black read more contemporary and pair well with dark window frames or modern lanais. Tan works beautifully on Mediterranean and Spanish-style homes with barrel tile roofs and stucco exteriors we see throughout older Pompano Beach neighborhoods and along the Intracoastal.

Glass selection depends on the opening’s orientation and what you want from the door. Clear laminated impact glass maximizes light and gives you the truest view of your pool deck or garden. Tinted glass cuts glare on eastern and western exposures where the sun hits hard in the morning and late afternoon. Low-E insulated glass is the pick for air-conditioned spaces where you want to limit heat gain without sacrificing visibility. The laminated PVB interlayer is in every option regardless, because in Pompano Beach, protection isn’t an upgrade; it’s the baseline.

Installation by TruePane Windows & Doors in Pompano Beach

A Miami-Dade NOA on paper means nothing if the door goes in wrong. The rating assumes proper anchoring, correct shimming, and a continuous perimeter seal. We see improperly installed impact doors in Pompano Beach regularly: units racked out of square, sills packed with shims instead of bedded in sealant, fastener patterns that don’t match the approved drawings. The door still looks fine on day one, but it won’t perform in a storm, and it’ll leak within a season or two.

Our installation process starts before the old door comes out. We inspect the rough opening, check the header and king studs for rot or termite damage, and verify the slab condition at the threshold. Then we set the new unit level, plumb, and square, with the sill properly supported and the frame anchored per the manufacturer’s approved installation method. We seal the perimeter with AAMA 812 low-expansion foam, then apply the exterior sealant joint per AAMA 2400/2410 practice. After the finish work, we run a water test on the sill and threshold and walk you through the operation and maintenance of the hardware.

Pompano Beach brings specific considerations. Coastal exposure means wind-driven rain will find any gap in the perimeter seal. The HVHZ designation means your permit package needs the right product approval documentation, which we provide. And if your home is east of Federal Highway, we’ll typically spec a door with the design pressure rating to match the higher exposure category. We handle the measurement, the permitting documentation, and the installation as one process. Call (863) 591-8673 to start with a free on-site measurement.

Frequently Asked Questions - French & Double Doors

What wind zone or design pressure are the French and double doors rated for? Design pressure is matched to your specific wind zone in Pompano Beach, up to +/-100, and never higher than the opening needs. Your home’s location relative to the coast, the height of the opening, and the surrounding terrain determine the required DP. We calculate it for your specific address and include it on your quote.

What is the lead time for French and double doors in Pompano Beach? Lead time varies by manufacturer, configuration, and finish. Custom sizes, specific glass packages, and certain finish colors can add weeks. Once we measure your opening and you approve the quote, we’ll give you a firm production timeline and schedule the installation date around it. Call (863) 591-8673 and we can check current lead times for the line you’re considering.

Does my Pompano Beach permit require a Miami-Dade NOA or Florida Product Approval submittal? In the HVHZ, yes, your permit package will require product approval documentation for the specific door configuration. We provide the NOA or Florida Product Approval numbers and drawings for the exact unit on your quote, so your permit application goes through without revision requests. We include this documentation as part of the order package.

Can I customize the size or configuration of my French or double doors? Yes, within the product line’s tested parameters. Maximum width is 96 inches. Beyond that, the configuration options depend on the manufacturer: active leaf left or right, equal or unequal leaf widths, transom integration, and hardware finish. Any configuration must fall within a tested approval, which we verify before ordering. We’ll measure your rough opening and build the door to it, not the other way around.

How do I maintain the frame and hardware on impact French doors in Pompano Beach? Rinse the frame and track monthly with fresh water to clear salt and sand, especially if you’re near the beach. Wipe down the weatherstripping with mild soap and check the weep holes in the sill track for debris. Lubricate the multi-point lock mechanism and hinges seasonally with a silicone-based lubricant. Don’t use petroleum-based products on vinyl frames. If you notice the door getting harder to operate, call us before the hardware wears unevenly.

Get a Quote - French & Double Doors in Pompano Beach

Ready to see what impact-rated French and double doors will cost for your Pompano Beach home? We’ll come out, measure your opening, and put together a written line-item quote with no pressure and no change orders down the road. Call (863) 591-8673 to schedule your free on-site measurement and get your project started.

Written by the team at TruePane Windows & Doors, serving Pompano Beach, FL.