Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Oakland Park
Custom windows and doors in Oakland Park FL require more than standard replacement work. Most of the city’s 1950s and 1960s concrete block ranch homes still have their original jalousie windows, and those openings were rarely built to modern rough-opening standards. When you call TruePane Windows & Doors at (863) 591-8673, you get a crew that understands Oakland Park’s HVHZ code, its older housing stock, and the tight lot constraints of neighborhoods like Floranada and the Andrews Avenue corridor. We have worked these streets for years, and we know what a licensed, permitted, and properly installed custom opening actually takes here.
Here is the short version of what you need to know: every replacement window or door in Oakland Park must carry a Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval rated for the High Velocity Hurricane Zone. That is a stricter standard than what neighboring Palm Beach County requires just 20 miles north. And on many of these older ranch homes, what looks like a simple swap becomes a masonry buildout because the original jalousie frame was poured directly into the block. We plan for that from the first measurement, so the quote you get is the work that actually happens.
Why TruePane Windows & Doors Is Oakland Park’s Preferred Custom Windows & Doors Company
We are a second-generation glazier’s shop, founded by Dale Kessler in 2008, and we have been putting glass in South Florida openings since 2008 combined. Oakland Park customers keep calling us because we do not treat a custom window as a standard retrofit. We know what lives inside the walls of a 1950s CBS ranch here, and we know what happens when you try to set a modern impact unit into an opening that was never framed for one.
Our reviews from Oakland Park homeowners consistently mention the same things: the crew showed up when we said we would, the work area was left clean at the end of the day, and the permit inspection passed on the first visit. We are not the cheapest bid on the board, and we do not chase that. We quote the job honestly, register both manufacturer warranty layers in writing before the truck leaves, and stand behind the work with our Done Right Promise. If the pane is not true, the job is not done.
Every project is priced upfront with no surprise line items, and most custom window and door jobs in Oakland Park are completed in a single visit. We send background-checked, uniformed technicians who measure twice and show you manufacturer lines side by side on paper, including Jeld-Wen, Simonton, PGT, and Ply Gem. You choose what makes sense for your house and your budget. We handle the permit, the inspection, and the paperwork.
Our Custom Windows & Doors Services in Oakland Park
Custom Shape Windows
Oakland Park ranches and mid-century homes often have odd geometric openings: eyebrow arches, trapezoid transoms, circular vent windows, and angled gable glass. These are not stock sizes, and they cannot be ordered from a big-box catalog. We template each opening on site, working around whatever the original block work left us, then order a custom shape window cut to the exact radius and angle. In Oakland Park, that custom unit still has to meet HVHZ impact standards, which means the glass package and frame profile are engineered for wind load, not just for aesthetics.
Oversized Glass Panels
If you are opening up a wall on a canal-side lot or replacing a fixed picture window with something larger, oversized glass panels in Oakland Park present a unique set of structural issues. The panels get heavy quickly, and a 1950s CBS wall often does not have a header sized for the new opening. We work with a structural engineer when needed, pull the permit, and coordinate the crane or lift access before the glass ever arrives. Our team has set panels large enough that they took four men and a vacuum rig to maneuver, and we did it without tearing up the neighbor’s hedges.
Architectural Grilles & SDLs
A lot of Oakland Park homeowners want the look of divided light without sacrificing impact performance. Simulated divided lites, or SDLs, give you the traditional muntin pattern on the exterior of the glass while keeping the inner pane smooth and easy to clean. We also install true architectural grilles between the glass panes for the mid-century ranch look that fits a 1960s Oakland Park house. These are built into the sealed insulated glass unit, and the grille profile is color-matched to the frame, so the whole thing reads as one piece. We have done dozens of these on the ranches along NE 16th Avenue and around Lloyd Estates, and the finished product looks like it has been there since the house was built.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oakland Park
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Oakland Park’s HVHZ requirements we most often quote PGT impact-rated product. Each of those brands carries Miami-Dade NOA listings, which is non-negotiable in this city. We stock common replacement hardware and sealant locally so we are not waiting on a parts truck from Orlando when your door keeps binding after a wet season. When we hand you a side-by-side quote, you can see exactly what each line costs and what the warranty covers, in writing.
Common Custom Windows & Doors Problems We See in Oakland Park Homes
- Cast-in-place jalousie frames with no rough opening. Homes built in the 1950s and early 1960s in Oakland Park often have aluminum jalousie frames that were set directly into the block pour. There is no wood or steel buck, no standard opening, and no room to set a modern impact window. We have to cut back the masonry, form a proper opening, and often install a pressure-treated buck before the new unit can be measured. That changes the quote, but ignoring it means the window fails inspection.
- Salt-corroded aluminum sliders on 1980s additions. The secondary wave of Oakland Park construction in the 1980s and 1990s used aluminum single-pane sliders. Thirty years of salt-laden humidity from the Atlantic, just three or four miles away, has oxidized the frames and worn out the rollers and locks. These units are also non-compliant with HVHZ code, so repair is rarely the right call. Replacement with an impact-rated slider or casement is usually the only way to pass a permit review.
- Improper flashing on custom door jambs. Oakland Park gets near-daily wet-season downpours. When a custom door jamb is not flashed correctly against the stucco, moisture drives behind the cladding and into the concrete block, leaving efflorescence stains and eventually rotting the jamb. We see this constantly on rear doors and patio doors where a previous contractor caulked instead of flashed. The fix is not more caulk. It is pulling the jamb, installing proper flashing and drip cap, and resetting the door.
- Sealed unit fogging from failed low-E packages. Older insulated glass units in Oakland Park fail faster than inland Florida because the constant humidity finds every weakness in the seal. A fogged pane is not just cosmetic; it means the gas fill is gone and the unit has lost most of its insulating value. We replace failed IGUs and register the new warranty in writing, so if that seal fails again inside the manufacturer’s coverage period you are not fighting a parts counter in another state.
Pricing for Custom Windows & Doors in Oakland Park, FL
Custom work does not sit on a flat rate card, but Oakland Park homeowners can expect to budget somewhere in these ranges. A single custom impact-rated casement or picture window that requires masonry buildout on a 1950s jalousie opening typically runs $1,800 to $3,400 installed, including the buildout, unit, stucco patch, and permit. An oversized fixed glass panel, engineered and set with a lift on a second-story opening, starts around $4,000 and can reach $12,000 or more depending on panel size and structural work. Architectural grilles and SDLs add $150 to $450 per opening depending on the pattern and whether the grille sits inside the glass or is applied to the surface. A full custom entry door replacement with an HVHZ-rated panel, new jamb, and proper flashing runs $3,500 to $7,000. These are real numbers from Oakland Park jobs, not brochure ranges.
Every quote from us is a written, line-item price. We do not change the number once work starts unless we find something behind the wall that no contractor could have known about, and even then we show you the issue and the cost before we touch it. Call (863) 591-8673 to schedule a free estimate. We come out, measure the opening properly, and hand you the quote on paper before we leave.
We Also Serve Cities Near Oakland Park
TruePane’s crews work regularly in Oakland Park and the surrounding cities. We serve Pompano Beach, Coconut Creek, Lauderdale-by-the-Sea, and Lighthouse Point with the same licensed, permitted, HVHZ-compliant installation standard. If you are just over the city line, the rules barely change; Pompano and Lighthouse Point are also in Broward’s HVHZ. Coconut Creek and Lauderdale-by-the-Sea carry the same or similar wind load requirements, so the process looks much the same. Our Custom Windows & Doors team covers the entire area with a single scheduling call to (863) 591-8673.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Oakland Park
Every custom window or door installed in Oakland Park must carry a Miami-Dade NOA or Florida Product Approval rated specifically for the High Velocity Hurricane Zone. That immediately eliminates a large segment of the window market, including many units sold at home centers and some “impact rated” products that are only approved for non-HVHZ counties. We only quote product lines that hold current HVHZ approvals, because quoting anything else guarantees a permit rejection and a reorder that costs you weeks and money. Call (863) 591-8673 and we will show you the approval documents during the estimate.
Because the original jalousie windows on 1950s and 1960s CBS ranches in Oakland Park were frequently cast directly into the concrete block wall. There was no framed rough opening, no wood buck, and no standard size. A modern impact window cannot be set into that narrow cast opening. The block has to be cut back, a proper opening formed, and in many cases a pressure-treated buck installed before the new unit can be measured and ordered. This is not an upsell; it is the difference between a window that passes inspection and one that fails. We plan for it from the first site visit so your quote reflects the real work.
An insulated glass unit, or IGU, has two panes sealed with a gas fill between them, which cuts heat transfer and condensation and is required for any energy-compliant replacement in Oakland Park. The original single-pane aluminum sliders on 1980s-era Oakland Park homes conduct heat directly through the frame, so the inside of the glass gets hot enough to feel like a radiator in the summer. They also fog and corrode faster in the salt-laden humidity we get three miles from the Atlantic. In an HVHZ market, the IGU also carries the impact-rated laminate required by code. The old single-pane slider does neither. For an exact price on replacing your specific openings, call (863) 591-8673 and ask for a free measurement.
We work from the driveway or the street when we have to, and we coordinate with you before the day of install so we know where the cars need to go. On a compact 1950s CBS ranch lot in Floranada, our crew discovered the original jalousie windows had been cast directly into the block with no rough opening. We spent half a day performing masonry buildout to form proper openings before we could even measure for the custom HVHZ impact units, then staged materials on the narrow driveway and used a self-contained scaffold to keep the sidewalk clear for neighbors. That is standard procedure for us, not an exception. We bring exactly the material we need, we keep the work zone contained, and we leave the driveway swept at the end of the day.
In Oakland Park, if the work requires access to a shared wall, a party wall, or requires entering your neighbor’s property to set scaffolding or remove old framing, yes, you need to give notice before we start. That is a city ordinance issue and a basic courtesy. We handle the conversation if you want us to; a uniformed technician will knock, explain the scope, and confirm the schedule. Most of the time the neighbor just wants to know when the noise will start and where the materials will sit. On a standard single-family lot in Oakland Park where the wall and lot line are yours, no notice is required. Call (863) 591-8673 with your specific street and we will tell you exactly what the job requires.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Oakland Park and surrounding Broward County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.