Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Parkland
Custom windows and doors in Parkland aren’t a style choice the way they are in some cities. They’re a code requirement with a design layer on top. Between Broward County’s High Velocity Hurricane Zone rules and the architectural review committees inside communities like Heron Bay, you can’t just order a stock slider and call it done. TruePane Windows & Doors has worked through that dual-compliance path with Parkland homeowners for years, and we’ll walk you through it step by step. Call (863) 591-8673 and we’ll send a technician who measures every opening twice and brings manufacturer quotes on paper, side by side, so you see exactly what you’re buying before you sign anything.
Why TruePane Windows & Doors Is Parkland’s Preferred Custom Windows & Doors Company
Homeowners in Parkland tend to have been through this before. They remember the installer who left a fogged seal and a sliding door that binds in July. That’s why they call us. We’re a second-generation glazier operation founded by Dale Kessler in 2008, and we carry the same standard into every home from Heron Bay to the western neighborhoods near the Everglades Conservation Areas: if the pane is not true, the job is not done.
Dale started TruePane because out-of-true installs and voided warranties were problems worth fixing permanently. That’s why every custom window and door job here gets The Keystone Standard: both manufacturer warranty layers registered in writing, with durations stated, before our truck leaves your driveway. No paperwork fights. No arguing. Just a workmanship warranty that’s good for 90 days under our Done Right Promise, in writing.
We hire local, train apprentices into journeymen, and treat your home the way our technicians would treat their own mother’s. Background-checked, uniformed, and punctual. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree, not a regional call center. When you call about a binding lanai slider in the CypressHead community or a fogged arched window in Parkland Golf & Country Club, you reach someone who can actually help.
Our Custom Windows & Doors Services in Parkland
Most Parkland homes fall between 2,500 and 5,000 square feet, built from about 1993 to 2008. That build era means wide stucco facades, oversized openings to screened lanais, two-story foyer windows, and lots of glass facing the afternoon storm track. Stock sizes don’t fit these openings. Custom fabrication is the standard, not the exception. Here’s what we handle most often for Custom Windows & Doors work in Parkland.
Custom Shape Windows
Arched transoms, radius windows, hexagonal openings above entry doors, elliptical bathroom glass. Parkland’s larger homes have them, and when the original insulated glass unit starts to fog, you can’t just swap in a rectangle. We fabricate matching radius units with the correct glass package, gas fill, and frame profile to meet current HVHZ wind-load requirements while matching the HOA’s pre-approved exterior finish. If the opening is non-standard, we measure it twice and build to the sixteenth of an inch.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, give a window the look of individual panes while keeping a single insulated glass unit underneath. That matters in Parkland, where architectural review committees often require a specific grille pattern or profile to match the original elevation. We quote manufacturer options from lines like PGT and Jeld-Wen side by side on paper, with grille width, color, and glass tint spelled out so the HOA submittal is straightforward. A cheap quote that skips SDL detail gets bounced by the committee, and we’d rather not waste your time.
Oversized Glass Panels
Twelve-foot sliders, floor-to-ceiling fixed panes, wide picture windows facing the golf course or conservation area. These openings carry serious wind load in Parkland, and the glass package has to be engineered for it. We specify laminated insulated units with the correct interlayer thickness and low-E coating, then install using HVHZ-rated flashing details rather than the stock tape a big-box crew might use. Water intrusion at the head and sill of a large opening is the most common failure we see, and it’s almost always an installation detail, not a product failure.
Commercial Storefront Glazing
Parkland has a smaller commercial footprint than cities to the east, but the storefronts and professional offices along Holmberg Road and State Road 7 still need impact-rated glazing under the same HVHZ code. We replace cracked or fogged storefront units, upgrade entry systems to impact ratings, and fabricate custom glass for reception areas and interior partitions. Curtain wall and storefront glazing follow the same NOA documentation path as residential work, and we handle that paperwork for you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parkland
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Parkland, we typically quote Simonton and PGT heavily because both carry broad Miami-Dade NOA coverage and offer the frame color range that Heron Bay and other HOAs insist on. Ply Gem and Jeld-Wen come into play on specific architectural lines. Because we stock locally for Parkland customers, hardware replacements and glass matching turn around faster than an out-of-area shop can manage, and we never have to ask you to wait on a part from three states away.
Common Custom Windows & Doors Problems We See in Parkland Homes
- Fogged builder-grade insulated glass. Homes built from 1993 to 2008 in planned communities like Heron Bay used original windows with basic air-filled IGUs. After 20-plus years, the seals have failed in thousands of them. You see condensation between the panes in the morning and a haze that never wipes off. The glass unit has to come out and be rebuilt.
- Frame oxidation and aluminum corrosion. Parkland sits far enough west that afternoon storms blow in off the Everglades, and the humidity lingers. Non-impact aluminum frames on original windows corrode at the corners, which weakens the frame and lets wind whistling through. Some HOAs will flag visibly oxidized frames during a resale inspection.
- Sliding glass door track wear and water intrusion. Every big Parkland home has at least one oversized slider to the lanai. When the rollers wear and the jambs shift under storm load, the door binds, wind noise comes through, and water creeps under the threshold. The repair or replacement has to be an HVHZ-rated install, not a hardware-only patch.
- HOA rejection of non-compliant window lines. Homeowners order impact windows that meet code, then the architectural review committee rejects them for the wrong bronze finish or the wrong glass tint. We’ve seen projects stall for months. We quote the approved frames and finishes from the start because we’ve worked with these committees on this side of Parkland long enough to know the submittal expectations.
Pricing for Custom Windows & Doors in Parkland, FL
Custom work means custom pricing, but here’s what Parkland homeowners should expect. A custom shape window, like a radius or arched unit with impact glass and low-E coating, typically runs $1,800 to $4,200 per opening depending on size and glass package. Architectural SDL upgrades add $350 to $900 per window. An oversized impact slider for a lanai, in the 10-to-14-foot range, lands between $4,500 and $9,500 installed. A two-story foyer arched window replacement usually comes in at $2,500 to $5,500. These are installed prices including NOA documentation, HOA submittal support, and our written workmanship warranty. Call (863) 591-8673 for a free estimate with line-item pricing on paper. We’ll quote your options side by side so you can see the difference between a bare code-minimum install and one that’s done right.
We Also Serve Cities Near Parkland
Our crews serve Parkland and the surrounding area, including Pompano Beach, Coconut Creek, Lauderdale-by-the-Sea, and Lighthouse Point. If you’re on the edge of Parkland or in a neighboring community, call and ask. Dispatch and scheduling are coordinated from our South FL office in Miami, with crews working locally in Parkland every week.
Serving Parkland, FL - Our Local Coverage Area
We’re based in the Parkland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Parkland
Yes. Parkland sits inside Broward County’s High Velocity Hurricane Zone, and the code applies to every replacement opening, including a single bedroom window. The product must carry a Miami-Dade Notice of Acceptance, and the installation must follow the NOA’s specified methods. A contractor who installs a non-NOA unit in Parkland is handing you a code violation that can surface at resale or during an insurance inspection. We only install NOA-listed products and register the documentation with both warranty layers before the job is closed. Call (863) 591-8673 if you’ve been told otherwise by another bid.
Heron Bay’s architectural review committee enforces approved exterior frame colors, glass tints, and hardware finishes, and every product must also hold a Miami-Dade NOA. That dual layer eliminates most stock impact window lines off the shelf. You need a manufacturer line that offers NOA-listed products in the HOA’s approved finish, which usually means custom fabrication. We’ve done this repeatedly in Heron Bay and know which submittal details get approved the first time. We do not guess at finishes. Call (863) 591-8673 and we’ll tell you whether the window you’re considering will pass review before you spend a dollar.
Seal failure shows up as fog between the glass panes. A door that’s hard to open and lets in wind noise is usually track and roller wear, sometimes with jamb misalignment from storm load. In Parkland’s oversized lanai sliders, both problems often appear together because the original doors were never designed for current HVHZ wind pressures. We can sometimes rebuild the track and rollers on a quality frame, but if the frame has oxidized or the glass package doesn’t meet code, a full replacement with a custom impact-rated unit is the honest answer. We’ll tell you which path applies to your door, with prices on paper, when you call (863) 591-8673.
Both outcomes happen, but the bigger one in Parkland right now is the second. Insurers have been non-renewing policies on homes without impact-rated openings, and having documentation matters. An NOA-listed product with installation records and registered warranty layers is evidence an insurer can accept. Some carriers do offer wind mitigation discounts for impact glass, and the savings depend on your policy, your opening protection coverage, and the age of the roof. We register both warranty layers in writing and provide the documentation your agent needs. Call (863) 591-8673 and we’ll explain what your quote includes so you can show it to your agent before the job starts.
Yes. We fabricate custom radius units to match the original arch profile, with the correct glass package for HVHZ wind loads. That means laminated impact glass with argon fill and low-E coating where the original had a basic air-filled unit. The exterior frame finish gets matched to the HOA’s approved color, and the interior sightlines stay close to the original profile. In a Heron Bay home built in 2001, our crew replaced a failing 12-foot sliding glass door and the two-story foyer’s arched window together, matching the HOA’s bronze finish exactly while upgrading both openings to current impact standards. The owner kept the look and got documentation that held up at insurance renewal. Call (863) 591-8673 for a free estimate on yours.
Get a Written, Line-Item Quote for Your Parkland Custom Windows & Doors Project
We don’t ask you to buy a job. We measure, quote, and let you compare. Every Parkland quote includes the product NOA, the HOA compliance path where it applies, both warranty registrations, and a workmanship warranty backed by our Done Right Promise. Dale Kessler founded TruePane on the rule that a square deal means no surprises on the bill and no second appointment left hanging. Call (863) 591-8673 today and talk to a live person who can schedule your free estimate. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Parkland and surrounding communities with custom window and door installations that meet the strictest code and HOA standards in South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.