Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Margate
Door installation in Margate, FL runs $1,800-$6,500 for most entry and French door replacements, with impact-rated units on the higher end because Broward County’s High-Velocity Hurricane Zone (HVHZ) rules apply to every exterior opening, no exceptions. Call us at (863) 591-8673 to schedule a free estimate. We know Margate’s permit reviewers, HOA boards, and 1960s-era concrete-block homes well enough to get your door in right the first time without a tarped opening sitting through a rain band.
Dale Kessler founded TruePane on a simple rule: if the pane is not true, the job is not done. That rule governs every door we set in Margate, whether it’s a single entry swing door off Winfield Boulevard or a full French door replacement in a 55+ community near Oriole Golf Course. We do the work properly, in one visit when we can, because we plan for the review calendar before we ever put a saw to the jamb.
Why TruePane Windows & Doors Is Margate’s Door Installation Team
Margate homeowners keep our number because we answer the phone. Not a voicemail tree, not a regional call center. A live person answers 24 hours a day, seven days a week, and that matters when a rain band is coming and your old jalousie slider is off its track.
We have been serving South Florida communities since 2008 through Dale Kessler’s craft tradition and TruePane’s own record since 2008. Crews dispatched from our South FL office serve Margate locally, and the technicians who show up are background-checked, uniformed, and measure every opening twice before they order anything. Our Margate customers tell us the same thing: the installer showed up when he said he would, quoted the manufacturer line side by side on paper, and registered both warranty layers before the truck left the driveway. That is The Keystone Standard, and it is in writing on every job.
We carry a strong local reputation in Margate because we treat a door opening the way we would treat our own mother’s. Permits, HOA approval letters, manufacturer NOA paperwork: we handle the packet so you are not chasing down a committee or a clerk. And every job is covered by our Done Right Promise. If it is not done right, we make it right. No paperwork fights, no fine print.
Our Door Installation Services in Margate
Entry & Swing Doors
A new entry door in Margate has to do more than look right. It has to carry a Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval, and the jamb has to be set straight in a concrete-block opening that has settled since the Eisenhower administration. We install entry and swing doors with correct HVHZ anchoring, including Jeld-Wen and PG-rated lines, and we match the finish to what your HOA will actually approve, not just what the brochure shows.
Double & French Doors
French door installs in Margate are common in the ranch homes off State Road 7 and around the Oriole and Calypso communities. We set impact-rated Andersen and PGT French door systems with heavy-gauge hinges, multi-point locks, and true compression seals. If you are replacing an original aluminum slider with a French door, we schedule the tear-out for after permit issuance so the opening is never exposed for more than the day of install. Door Installation of this type takes careful shimming in settled CBS framing: that is the part handymen get wrong, and the part we refuse to rush.
Storm Doors
A storm door in Margate is a working door, not a decoration: it takes the brunt of summer squall lines and keeps the primary entry door from cooking in direct June sun. We stock and install storm doors with reinforced corners and proper drainage, sized for both standard and custom Margate openings. They also buy you a year or two while you plan a full impact-rated entry replacement.
Pivot Doors
Pivot doors are heavier, wider, and less forgiving than a standard swing door. In a Margate concrete-block home, that means the header and floor anchor have to be checked before the slab ever shows up. We have installed pivot doors in larger Margate custom builds, and we will tell you plainly if your opening needs structural reinforcement first. We do not sell you a door the house cannot carry.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Margate we commonly quote PGT because their impact-rated product approvals and HVHZ documentation are dependable and well understood by Broward County reviewers. We also work with Simonton lines where a homeowner wants a specific aesthetic from an association packet. Because we keep local stock and order directly from manufacturers, Margate customers get faster turnaround than homeowners waiting on a big-box special order. We quote lines side by side on paper so you see exactly what you are buying.
Common Door Installation Problems We See in Margate Homes
- Non-NOA doors red-tagged at HVHZ review. A homeowner or handyman installs a door without a Miami-Dade NOA, the Broward County permit review catches it, and the work gets red-tagged. The door has to come out and the opening needs re-framing. We pull the correct product approval before we file anything.
- 55+ HOA denies the door after it was already ordered. A Margate association board rejects the style or finish, leaving an impact-rated slab with no approved jamb and weeks of delay. We file the HOA uniform-product aesthetic packet before the order goes to the manufacturer.
- Fogged sidelights and IGU seal failure. Margate’s year-round humidity and intense UV degrade insulated glass seals faster than in drier climates. A fogged sidelight on an entry door means the seal is gone and the unit needs replacement, not a wipe-down.
- Tear-out before permit approval leaves a tarped opening. A contractor starts pulling the old door before the permit is issued so he can keep his schedule. A Margate afternoon rain band floods the opening and forces a rushed, misaligned install. We schedule for after permit issuance, always.
Pricing for Door Installation in Margate, FL
Here is what Margate homeowners should expect to budget, based on what we currently see in this market:
- Entry & swing door replacement: $1,800-$4,200
- Double or French door (impact-rated): $3,500-$6,500
- Storm door install: $600-$1,400
- Pivot door install (with structural checks): $4,000-$8,500
Margate pricing runs at or slightly above nearby inland cities because every exterior door has to meet HVHZ anchoring and product-approval requirements. That adds engineering review and heavier hardware, but it is the law here and there is no inland carve-out. We give upfront, written line-item quotes and we do not add surprise charges to the final bill. A square deal. Call (863) 591-8673 to schedule your free estimate. Seniors and veterans always receive a 5% discount, and we honor the a free written repair estimate on qualifying work.
We Also Serve Cities Near Margate
Our crews work throughout northern Broward County, including Coconut Creek, Coral Springs, Pompano Beach, and Deerfield Beach. If you are just outside Margate proper, we can still help. Door Installation in Margate is our focus on this page, but the same background-checked crews and the same Keystone Standard apply across the county. Call us and we will tell you plainly whether we serve your street.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Margate
Yes. Margate sits entirely inside Broward County’s High-Velocity Hurricane Zone, and there is no inland carve-out. Every exterior door, even a single swing door on a 1965 concrete-block ranch, must carry a Miami-Dade Notice of Acceptance or Florida Product Approval before the permit will be issued. We pull the NOA as part of the permit packet. Call (863) 591-8673 for an exact quote on your door.
Yes. We file the HOA uniform-product aesthetic packet before the order goes to the manufacturer, using finishes, colors, and frame styles the association actually approves. We match what Margate boards along Winfield Boulevard and the Oriole-area 55+ communities have accepted in past submissions, which saves weeks of back-and-forth. Call (863) 591-8673 and we will walk you through what your board needs.
Margate permit review typically adds 7-14 business days beyond what a non-HVHZ municipality in another part of Florida would take, because the Broward County reviewer checks every line item against the HVHZ product approval database. We build that time into the schedule from the first measure, and we no not cut the opening until the permit is issued. Call (863) 591-8673 for a timeline based on your specific door and community.
In most cases, yes. The original aluminum sliders and jalousie windows in 1960s and 1970s Margate homes are the leading reason Florida carriers issue non-renewal notices. Replacing the non-compliant sliding door with an impact-rated, NOA-approved unit and getting the permit closed out usually satisfies the insurer’s glazing requirement for that opening. We provide the permit and product-approval paperwork in a packet you can send directly to your agent. Call (863) 591-8673 for a free estimate.
That fog means the insulated glass seal has failed and moisture has gotten into the unit. You cannot wipe it away, and the fix is replacing the sidelight glass or the door slab. In Margate’s humidity, a failed seal also means the door is losing energy performance and is closer to full glass failure. Call (863) 591-8673 and we will measure and quote the replacement, typically in one visit.
Written by Dale Kessler, Founder of TruePane Windows & Doors. Dale is a second-generation glazier who has spent years setting windows and doors square in South Florida’s most demanding building environment.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.