Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Glass Railing Systems in Pompano Beach: What to Know First
We install, repair, and replace CGI glass railing systems throughout Pompano Beach, and most repairs are completed in a single visit. As an independent CGI service provider, we are not affiliated with or authorized by the manufacturer, but our technicians have worked on enough CGI railing jobs across Broward County to know exactly where these systems show their age and how to fix them without voiding the warranty that’s left. If you own a CGI railing in Pompano Beach and something is loose, clouded, or pulling at the corners, call (863) 591-8673 and we’ll give you a straight answer about what it will take to make it right.
How CGI Products Fail - and How We Fix Them
CGI builds a solid aluminum railing frame, and most of what we see in Pompano Beach isn’t a manufacturing defect. It’s what salt air, storm-driven rain, and years of thermal cycling do to the points where metal meets glass. Here’s what shows up most often on CGI railing systems in this area:
- Glass panel seal failure on exposed runs. On CGI’s frameless glass railing lines, the laminated glass panels are edged with a seal that takes direct sun and wind-driven salt spray in Pompano Beach. When that edge seal lets go, moisture creeps in and the panel clouds from the inside. We see this most often on east-facing decks and pool enclosures within two miles of the Intracoastal. The fix is a panel replacement with a correctly specified marine-grade edge seal, not a reseal of the failed unit.
- Base shoe corrosion at the deck fasteners. CGI’s aluminum base shoes are powder coated, but the stainless fasteners that pin them to concrete pool decks are the weak point. In Pompano Beach, chlorinated pool water splashes up, salt air settles in, and those fastener heads corrode until the base shoe starts lifting at the corners. We drill out the old fasteners, treat the holes, and reset the shoe with fresh stainless hardware rated for constant salt exposure.
- Grab rail looseness on interior staircase systems. CGI’s interior glass railing systems use a continuous top rail that homeowners lean on every day. The set screws that secure the rail to the glass clamp posts work loose over time, especially on stairs with heavy foot traffic. The symptom is a slight give or rattle when you grip the rail. This is a fast fix when caught early, but if it goes unaddressed the clamp post itself can develop a crack around the set screw bore.
- Gate sag on pool fence installations. CGI pool and spa glass fencing typically includes a self-closing gate, and that gate’s hinge side takes a beating. We regularly replace worn hinge bushings and re-hang gates in Pompano Beach pool enclosures so they close square and latch cleanly. A sagging gate is what leads to cracked glass panels at the latch edge.
- Delaminating glass on older frameless panels. CGI uses laminated safety glass, which is the right call for impact resistance. But on installations more than 12 or 15 years old near the ocean, we see the lamination layer itself begin to separate at the corners. It starts as a milky edge and spreads inward. There is no repair for delamination. The panel comes out and a new one goes in, matched to the existing panel thickness so the railing keeps its clean sightline.
Our CGI Glass Railing Systems Process
Every CGI job follows the same sequence, whether it’s a single cracked panel or a full pool enclosure. The goal is to diagnose correctly on the first visit and leave you with a railing that holds steady.
- 1
We measure and inspect before we quote. A technician comes out, measures every opening twice, checks the condition of the glass, the base shoes, the fasteners, and the gate hardware. We write down what we find, including the CGI series if it’s legible on the frame.
- 2
We lay out your options on paper. OEM glass panels when the warranty still applies, quality aftermarket panels when it doesn’t, and a clear explanation of the trade-off for each. If the frame itself is sound, we don’t sell a new frame.
- 3
We order or pull the right parts. CGI glass panels are sized to the specific railing run, and getting the thickness and edge treatment right matters. We don’t cut corners on glass spec.
- 4
We do the work in one visit where possible. Panels come out, corroded hardware gets replaced, base shoes get reset. If the job is a single panel swap, you’ll usually have it done the same day.
- 5
We test the run before we leave. Every panel gets checked for movement, every gate gets cycled, every fastener gets torqued. If it doesn’t sit true, we fix it before the truck pulls away.
- 6
We register the warranty in writing. Both manufacturer warranty layers are documented before we leave the driveway. If the pane is not true, the job is not done.
What CGI Glass Railing Systems Costs in Pompano Beach
Pricing here follows the work, not a menu. A single replacement glass panel for a CGI railing in Pompano Beach runs $350 to $700 installed, depending on panel width, thickness, and whether the edge seal needs a marine-grade upgrade. Re-setting a lifted base shoe with new stainless fasteners runs $150 to $300 per section. A gate hinge rebuild with new bushings runs $250 to $450. A full pool enclosure glass swap runs $4,000 to $9,000 depending on linear footage and panel count. If you’re weighing repair versus replacement, ask us for both numbers side by side. Call (863) 591-8673 and we’ll come measure it. Estimates are free, and the price we quote is the price you pay.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving this area for more than years. Dale Kessler grew up in the Pompano Beach Highlands, and he spent enough summers watching salt air eat through poorly sealed frames to know what bad glazing work costs a homeowner over time. That’s why every CGI job we take is covered by the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves the driveway, no paperwork fights, no arguing. Our technicians are background-checked and uniformed, and they measure twice because once is how corners get cut. When a CGI part isn’t the right answer, we quote Andersen, Pella, or PGT lines side by side on paper so you see exactly what you’re buying. If it isn’t in writing, it isn’t a warranty.
FAQs
No, not if the repair is done correctly and the right parts are used. On jobs where the CGI warranty still applies, we use OEM components and document the work so the manufacturer can’t point to an installation error. If the warranty has lapsed, we’ll tell you that plainly and quote a quality aftermarket alternative. Call (863) 591-8673 and we’ll check your serial number before we touch anything.
Most standard CGI glass panels arrive in our shop within 7 to 14 days. Custom sizes or laminated panels with special edge seals can take 3 to 4 weeks. We’ll give you the honest lead time when we measure, not an optimistic guess.
Yes, and matching is the hardest part of this work, which is why we measure twice and order from spec, not from memory. We need the panel dimensions, the glass thickness, and the edge finish. If the original series has been discontinued, we’ll source a panel that matches the sightline and the wind load rating for Pompano Beach code.
It depends on the frame condition, not the age. If the aluminum base shoes and posts are structurally sound, replacing glass panels and fasteners is almost always the right call. If the frame is corroding from the inside at the deck line, replacement may cost less in the long run. We’ll show you the numbers both ways, and the decision stays yours.
We pull the permit whenever the job requires it, which depends on the scope and the city’s current code for pool barriers and elevated decks. Building departments in Broward County take pool fence code seriously, and so do we. The permit gets pulled before the work starts, and the final inspection gets scheduled before we call the job done.
If your CGI glass railing in Pompano Beach is loose, clouded, or pulling at the deck, call (863) 591-8673 to schedule a free estimate. We’ll measure it, price it honestly, and stand behind the work in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.