Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Andersen Impact Windows & Doors in Pompano Beach: What to Know First
Andersen impact windows and doors in Pompano Beach run anywhere from $1,900 to $7,400 installed depending on the line, size, and whether you’re replacing a single unit or a full opening. As an independent Andersen service provider, we do it all: replacements, new installs, repairs to existing units, and warranty-documented work, most of it completed in a single visit. Call (863) 591-8673 if you own a Andersen product and want someone who knows the difference between a 400 Series sash and a 200 Series frame without reading the label twice.

This page is for the homeowner who’s lived in a Pompano Beach house for twenty years and isn’t about to hand it over to whoever’s cheapest. It names the specific Andersen lines we see in weather-beaten Florida homes, the ways they fail, and what we charge to make them right.
How Andersen Products Fail, and How We Fix Them
- 200 Series tilt-wash sashes that bind after a storm. The 200 Series uses a vinyl-jacketed wood frame with a mechanical tilt mechanism that salt air corrodes into stiffness. In Pompano Beach, we see the same pattern every season: a sash that tilts fine in January won’t tilt by August because the pivot hardware has oxidized. We replace the pivot pins and balance hardware rather than forcing the sash, which is why the frame doesn’t crack.
- 400 Series Frenchwood impact doors that sag on the hinge side. Andersen’s 400 Series Frenchwood impact-rated doors are heavy, and on older installations the original installers didn’t back-shim the hinges. After ten years of Pompano Beach humidity cycles, the slab drops a quarter inch and the weatherstripping on the strike side stops sealing. We shim the hinges true, re-set the slab, and then the deadbolt throws clean again.
- E-Series triple-pane units with blown seals after a pressure cycle. Andersen’s E-Series offers a triple-pane impact option, and when the seal goes, owners see permanent fog between the glass. In a coastal climate, the seal often fails because the original install left the weep holes blocked, so water sat against the spacer. We service the glass pack and clear the weep drainage as part of the fix, not just the seal.
- A-Series casements with operator gears that strip during high wind. The A-Series impact casement uses a folding crank operator, and in Pompano Beach, homeowners who leave windows cracked during gusts strip the gear teeth. We keep OEM operator assemblies in the truck for A-Series specifically. It’s a $180-$260 repair versus a $900-plus new sash.
- Roller assemblies on 100 Series gliding doors that seize from sand grit. The 100 Series is Andersen’s value impact line, and the lower track collects blown sand like a trough. Once the rollers bind, the slab scrapes the rail and wears a groove. We pull the panel, replace the rollers, and re-route the drain channel so it doesn’t happen again next summer.
Our Andersen Impact Windows & Doors Process
- 1
Call and talk to a live person. You reach us, not a voicemail tree. We ask what you’re seeing, what the home is, and when you’re available. We’ll be there when we say.
- 2
Measure every opening twice. A background-checked, uniformed technician comes out, checks the rough opening, the reveal, the existing flashing, and the true square of the frame. We don’t order a window until the numbers are written down and checked.
- 3
Quote side by side on paper. We show you the Andersen line that matches what you have, and we’ll also price you the comparable from Pella, PGT, or CGI if asked. You see what you’re buying and what each choice costs.
- 4
Install to the letter of the manufacturer’s installation guide. For Andersen specifically, that means their flashing method, their shim positions, their weep management. No shortcuts that void the warranty.
- 5
Test the unit before we clean up. Lock it, cycle it, check the seal compression, and run a water test if it’s a flashing job.
- 6
Register both warranty layers in writing. The Keystone Standard: manufacturer warranty registered, duration stated, workmanship guarantee in writing for 90 days. If the pane is not true, the job is not done.
What Andersen Impact Windows & Doors Costs in Pompano Beach
Here’s what we’re seeing on current Pompano Beach jobs:
- 100 Series impact single-hung replacement: $1,900-$2,800 installed
- 200 Series impact picture window: $2,400-$3,900 installed
- 400 Series impact sliding door replacement: $3,800-$6,200 installed
- E-Series impact casement pair: $4,500-$7,400 installed
What moves the number most is the opening size, the glass package you choose, and whether existing flashing and framing is sound or needs correction. We give a written line-item quote before work starts, and it doesn’t change unless you change the job. Call (863) 591-8673 for a free estimate.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve served Broward County communities since 2008, and we still answer the phone like a local company because that’s what we are. Every job carries the Done Right Promise: if it isn’t done right, we make it right, no paperwork fights, no arguing. Our technicians know Andersen products well enough to tell you when a unit is worth fixing and when replacement is actually cheaper than chasing problems. And when a project falls outside what makes, we’re an authorized installer for PGT, CGI, and others, so we can quote you a comparable without pretending one line does everything.
Dale Kessler grew up in the Pompano Beach Highlands and has spent enough summers watching salt air eat through poorly sealed frames to know what bad glazing actually costs a homeowner. If it isn’t in writing, it isn’t a warranty.
FAQs
No, a properly performed sash replacement does not void the manufacturer’s frame warranty, and we document the work so the warranty stays enforceable. Call (863) 591-8673 if you’re unsure what’s covered.
Yes, aftermarket and OEM touch-up kits are available for all current Andersen lines, including the 100, 200, 400, and A-Series. We can get close enough that the repair blends without a full repaint.
Most single-door replacements are ordered, installed, and tested within two to four weeks, with the installation itself done in a day. Call (863) 591-8673 for a specific timeline based on your opening.
Yes, we do. Most of the Andersen repair work we handle in Pompano Beach is on homes where the original installer is long gone or unresponsive.
If the frame is solid and the hardware is working, replacing the glass pack is usually the smarter move, typically half the cost of a full unit. Call (863) 591-8673 for an honest take on your situation.
Contact TruePane Windows & Doors
If you own Andersen impact windows or doors in Pompano Beach and you want them looked at by someone who treats the work like craft, call (863) 591-8673. We’ll walk you through what you have, what it needs, and what it costs, all on paper, before you owe us anything.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After