Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Andersen Window Replacement in Pompano Beach: What to Know First
Andersen window replacement in Pompano Beach typically runs $850 to $2,400 per opening depending on the series, glass package, and whether it’s a full-frame or insert job. Most single-window replacements take one visit, and larger multi-window projects are usually finished within two to three days once materials are on hand. We’re an independent Andersen service provider, which means we give you honest answers about whether a window needs replacing or can be repaired, and we quote both options on paper before any work begins.

This page is for homeowners in Pompano Beach who own Andersen windows and need straight answers: what fails, what it costs, and who can be trusted to do the work. Call (863) 591-8673 for a free estimate.
How Andersen Products Fail - and How We Fix Them
Andersen makes a solid window. But after two decades in Pompano Beach’s salt air, even solid windows develop problems. Here are the failure modes we see most often on Andersen jobs, and what we do about them.
- Narroline glazing bead rot and seal failure. The Narroline series, installed in thousands of Pompano Beach homes built in the 1980s and 1990s, uses a vinyl glazing bead that gets brittle under UV exposure. Once that bead cracks, the insulated glass seal is next. We see fogged Narroline sashes all over the Highlands and Garden Isles. The fix is usually a sash replacement rather than a full window replacement, which saves the homeowner hundreds per opening.
- 200 Series Perma-Shield wood rot along the sill. The 200 Series has a vinyl-clad wood frame. The cladding is good, but the sill drains can clog with sand and salt residue, trapping moisture against the wood. Once rot reaches the sill, insert replacement won’t help. We cut out the damaged frame and do a full-frame replacement with proper flashing so water never pools there again.
- 400 Series tilt-wash balance failures. The 400 Series tilt-wash double-hung uses a coil spring balance system. After years of salt air and humidity, those balances lose tension and the sash won’t stay up. Homeowners describe it as a “window that slams shut.” We replace the balance assemblies with factory-matched hardware and reset the sash so it holds position at any height.
- Awning and casement crank operator failures on the A-Series. The A-Series is Andersen’s premium architectural line, and the hardware is generally good. But crank operators wear out faster in coastal conditions because the gear teeth corrode. We typically recommend replacing the operator assembly rather than the entire window. It’s a $180 to $320 fix instead of a $1,400 replacement.
- Storm window frame corrosion on older Andersen storm units. Andersen made a line of aluminum storm windows that many Pompano Beach homeowners still have over their primary windows. The frames corrode at the corners where salt spray collects. When the frame splits, the storm window does nothing. We replace the storm window as a unit, and we’ll tell you honestly whether adding or keeping storm windows makes sense for your house’s exposure.
Our Andersen Window Replacement Process
Here’s what a typical Andersen replacement looks like with us, from first call to final cleanup.
- 1
You call (863) 591-8673. A live person answers, day or night. We schedule a time that works, and our technician arrives on schedule in a marked truck.
- 2
We measure and diagnose. Every opening gets measured twice. We look at what’s actually failing: the sash, the frame, the glass, or the hardware. You’d be surprised how often a “replacement” is really a repair a tenth of the price.
- 3
We quote on paper. You get a written line-item quote showing the repair option and the replacement option side by side, with manufacturer names and part numbers. No verbal estimates, no fuzzy numbers.
- 4
We order and install. When replacement is the right call, we order the correct Andersen-compatible parts or full units. Installation day includes drop cloths, careful removal, and a clean opening before the new unit goes in.
- 5
We test and document. After setting, we check plumb and square before sealing, then test operation and lock function. We register every warranty layer in writing before the truck leaves. If the pane is not true, the job is not done.
- 6
We clean up and follow up. The work area is left cleaner than we found it. If anything concerns you within 90 days, we come back and make it right. No paperwork fights, no arguing.
What Andersen Window Replacement Costs in Pompano Beach
Pricing depends on what’s actually wrong with the window, but here’s what we see across the Pompano Beach market for common Andersen scenarios.
| Andersen Job Type | Typical Range (Per Opening) |
|---|---|
| Narroline sash replacement (fogged glass) | $375 - $650 |
| 200 Series insert window replacement | $850 - $1,400 |
| 400 Series full-frame replacement | $1,200 - $2,000 |
| A-Series casement full-frame replacement | $1,500 - $2,400 |
| Storm window replacement (aluminum) | $275 - $500 |
What moves the price: glass package (impact-rated adds cost), wood rot repair at the rough opening, and whether the home is on the water where code requires upgraded fasteners and flashing. We quote fixed pricing before work starts, and the number on the estimate is the number on the bill. Call (863) 591-8673 for an exact quote.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for Andersen Work
Dale Kessler grew up in the Pompano Beach Highlands and spent enough summers watching salt air eat through poorly sealed frames to understand what bad glazing work actually costs a homeowner over time. He runs TruePane the way a second-generation tradesperson does, slowly enough to do it once, carefully enough not to have to do it twice.
We’ve been serving local communities since 2008, and we stand behind every job with The Keystone Standard: both manufacturer warranty layers registered in writing before the truck leaves the driveway, plus our Done Right Promise. If something’s not right, we make it right. No fine print that covers neither.
Andersen is one of more than a dozen manufacturer lines we service. If a repair doesn’t make sense or parts aren’t available, we’ll quote alternatives like Pella, PGT, or CGI honestly, side by side on paper, so you see exactly what you’re buying. A square deal, upfront, every time.
FAQs
No, replacing your Andersen windows with properly installed Andersen-compatible units does not void the manufacturer warranty on the new windows. What voids warranties is poor installation or unregistered product. We register both warranty layers in writing on every job. As Dale says: if it isn’t in writing, it isn’t a warranty. Call (863) 591-8673 to discuss your specific windows.
Yes. We match as closely as possible, including frame color, grid pattern, and glass type, for the common Andersen lines found in Pompano Beach, including Narroline, 200 Series, and 400 Series. Exact color matching on units older than 20 years can be slightly off due to UV fading, and we’ll tell you that honestly before you commit.
If the frame is sound, replacing the sash or the insulated glass unit costs less than a full window replacement and often makes more sense. We diagnose first and quote both options in writing so you can see the numbers and decide. Estimates are free at (863) 591-8673.
Most single-window replacements are completed in one visit, typically 2 to 4 hours depending on the frame condition. Multi-window projects usually finish in two to three days once materials arrive. You’ll get a firm schedule before we start.
Yes. We regularly replace and install impact-rated Andersen units in Pompano Beach. Coastal code compliance matters here, and we pull permits and schedule inspections when the job requires them. We’ll tell you upfront whether your project needs impact glass or if standard insulated glass is sufficient for your opening.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After