Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Pompano Beach: What to Know First
CGI roof replacement and installation in Pompano Beach runs between $8,500 and $22,000 for a typical single-family home, with most jobs completed in two to five working days once materials land. We quote fixed numbers on paper before the first fastener goes in, and we stand behind the work with our Done Right Promise. If you own a CGI roof and it is failing, or you are considering CGI for a new roof, this page tells you what actually happens on the job, what it costs, and why we treat every CGI install as a craft commitment rather than a transaction.
Call (863) 591-8673 and a live person answers, 24 hours a day, 7 days a week. No voicemail tree, no callback form. Tell us what you are seeing, and we will schedule a measure and an honest estimate.
Key Takeaways
- We are an independent CGI service provider, not a factory-authorized installer, so our loyalty is to the homeowner, not the manufacturer’s sales quota.
- CGI products are solid, but Pompano Beach’s salt air and hurricane-driven wind cycles expose specific weaknesses that show up in predictable ways.
- Every job is quoted upfront with written numbers. No change orders, no surprise line items.
How CGI Products Fail - and How We Fix Them
CGI builds a serious product, but nothing made of metal, sealant, and fasteners holds forever against the Atlantic’s salt and the summer sun. Here is what we actually see when a CGI roof needs replacement or installation work in Pompano Beach.
- Fastener corrosion around the perimeter on CGI’s exposed-fastener panel lines. The coated hex-head screws that come standard on many CGI metal roof panels eventually lose their protective cap to UV and salt spray. Once the cap goes, the zinc underneath is bare and rust creeps into the panel. We replace every compromised fastener with a corrosion-rated equivalent and re-seat the panel edge with butyl tape before the new screws go in. On the CGI board-and-batten profile, we see this most often on the north and east faces where roofs hold morning moisture longer.
- Panel oil-canning that gets worse after hurricane winds. CGI’s standing seam and flat panels can develop visible waviness, what the industry calls oil-canning, when wind loads flex the panels beyond their designed tolerance. It is not always a leak risk, but it signals that the panel’s stiffening ribs or the clip spacing were not matched to the wind zone. Our fix is a re-clip and re-fasten at correct spacing, and we tell you plainly if the panel is too far gone and needs replacing rather than re-setting.
- Eave and rake trim pulling away. The painted aluminum trim that finishes a CGI roof edge works loose as the fascia behind it swells and contracts in Pompano Beach humidity. A trim piece that has lifted at the corner is a water entry point waiting for the next afternoon storm. We pull the trim, check the fascia for rot, replace what is bad, and re-set the trim with a heavier sealant bed than what came from the factory.
- Underlayment failure beneath older CGI panel systems. The panel may look fine from the ground, but the synthetic underlayment beneath it has a service life. In Pompano Beach, where a roof deck can hit 140 degrees in July, underlayment dries out and tears at the fasteners. When a CGI roof reaches the end of its underlayment, the panels need to come up, the deck resealed, and the panels reinstalled or replaced. That is a full replacement job, not a patch.
- Improper panel lap on re-roofs by other contractors. We have walked onto Pompano Beach roofs where a previous installer lapped CGI panels the wrong direction for the prevailing wind. Water gets driven uphill into the lap and collects inside the seam. The fix is pulling the affected run and reinstalling it with the lap running with the wind, not against it. It takes longer, but it stops the leak permanently.
Our CGI Roof Replacement & Installation Process
Here is how a CGI roof job runs with us, from the first call to the final walk-through.
- 1
Call and talk to a person. You reach us at (863) 591-8673. We ask what you are seeing: leaks, loose panels, rust streaks, or just age. We schedule a site visit.
- 2
Measure and photo-log everything. A background-checked, uniformed technician walks the roof, measures every plane, and documents the existing condition. We check the deck, the underlayment, the fasteners, and the trim. You get a straight account of what needs work and what can stay.
- 3
Written line-item quote. No verbal ballpark. You get numbers on paper for panels, underlayment, trim, fasteners, labor, and disposal. We quote CGI panels and, where it makes sense, we show you PGT or CWS or ES Windows alternatives side by side so you know what you are buying.
- 4
Removal and deck prep. Old panels come up, the deck gets inspected and resealed, and we correct any flashing or penetration issues before the new material goes down. This is where most shortcuts happen. We do not skip it.
- 5
Install and test. Panels and trim go in per manufacturer specification, clipped and fastened for Broward County’s wind zone. We water-test every seam and transition before we come down.
- 6
Cleanup, registration, and the Done Right Promise. We haul off the debris, register the manufacturer warranty layers in writing with durations stated, and leave you with a clean roof and a written guarantee. If it is not done right, we make it right. No paperwork fight.
What CGI Roof Replacement & Installation Costs in Pompano Beach
CGI roof work in Pompano Beach starts around $8,500 for a smaller single-story home with a simple gable and basic underlayment replacement. A two-story house with multiple hips, valleys, and full tear-off runs $14,000 to $22,000. Here is what drives the number.
| CGI Roof Scenario | Typical Cost Range |
|---|---|
| Partial panel replacement, single side of roof | $2,800 - $6,500 |
| Full tear-off and re-panel, simple gable | $8,500 - $13,000 |
| Full tear-off, multi-hip design, new underlayment, trim | $14,000 - $22,000 |
| Underlayment replacement with panel re-use (where panels are sound) | $5,500 - $9,500 |
What moves the price: roof height and pitch, whether the deck needs repair, how many penetrations (vents, skylights, pipes) need re-flashing, and whether the existing CGI panels can be saved or must be replaced. We give fixed pricing, not allowances. Call (863) 591-8673 for a free estimate with the number in writing before you decide anything.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for CGI Work
We have spent years serving local communities across Broward County, and we run TruePane the way a second-generation tradesperson runs a shop: slowly enough to do it once, carefully enough not to have to do it twice. Dale Kessler grew up in the Pompano Beach Highlands and trained at Broward College, where he learned to read a spec sheet before he learned to sell anything. That habit governs every CGI roof estimate we write.
When we quote a CGI job, we show you the numbers side by side with what PGT, CWS, ES Windows, or ECO Window Systems would cost for the same opening. You decide with full information. If something is not right after the install, our Done Right Promise means we come back and fix it without a paperwork fight. A live person answers the phone 24/7, and the technician who measures your roof is the same background-checked, uniformed professional who installs it. We hire local, train our own, and plan to be in Pompano Beach in thirty years.
FAQs
Installing or replacing CGI panels by an independent contractor does not automatically void the manufacturer’s material warranty, so long as the work is done to CGI’s published installation specification and the panels themselves are not modified, cut, or refastened in a way the spec prohibits. We register both warranty layers in writing before our truck leaves the driveway. Dale Kessler keeps one rule on the whiteboard: if it is not in writing, it is not a warranty.
If the panels are sound and the problem is localized, such as failed fasteners, a bad lap, or trim pulling away, we repair the section and leave the rest alone. If the underlayment has failed or the panels are oil-canned beyond re-clipping, full replacement is the honest call and we will tell you that in plain language, with the numbers to back it up. Call (863) 591-8673 and we will tell you which situation you have.
Most single-family CGI tear-offs and replacements in Pompano Beach run two to five working days, depending on roof complexity and whether the deck needs repair. We schedule a clean window and hold to it. We will be there when we say.
Wind-driven rain exposes the spots that ordinary rainfall misses. If your CGI roof leaks only in heavy, wind-driven storms, the water is most likely getting pushed uphill into a panel lap or a trim joint that faces the prevailing wind. We find those openings, re-lap or re-seal them properly, and test every seam with water before we call the job done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.