Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Coconut Creek, FL | TruePane Windows & Doors
We provide independent CGI window and door service across Coconut Creek, from Wynmoor Village to the villa communities off Lyons Road. We’re not factory-authorized, and we don’t pretend to be. What we are is a local crew that works on CGI products every week and understands exactly how they hold up in Broward County’s High Velocity Hurricane Zone, especially inside HOA-governed condo buildings where the approval process matters as much as the install itself. Call (863) 591-8673 for a free estimate on any CGI repair or replacement in Coconut Creek.
Why Coconut Creek Residents Choose Us for CGI Service
Dale Kessler grew up in the Pompano Beach Highlands and spent enough summers watching salt air eat through poorly sealed frames to understand what bad glazing work costs a homeowner over time. He trained in the building trades program at Broward College, where he learned to read a spec sheet before he learned to sell anything. That habit stuck. When we show up for Coconut Creek Window Installation at a condo to look at a CGI slider that drags or a casement with fogged glass, we’re reading the original installation details, checking the Miami-Dade NOA number, and figuring out whether the issue is the product, the install, or forty years of Florida humidity working against both. We carry factory-sourced CGI rollers, balances, and weatherstripping, and when a part’s discontinued, we match the original profile with a high-grade aftermarket component and tell you up front which one went in. We’ve been doing this since 2008 as a service tradition, and we register both warranty layers in writing before the truck leaves your driveway. Many of our Coconut Creek customers are on a first-name basis with our techs, because they’ve called us twice and gotten the same person both times.
Common CGI Windows & Doors Problems We Solve in Coconut Creek
- Roller and track wear on CGI Targa sliding glass doors. In high-cycle condo use, balcony access doors in Coconut Creek buildings get opened and closed thousands of times a year. The original rollers wear flat, the aluminum track thins, and the panel starts to drag or jam even when the glass is perfectly intact. We replace the roller set and realign the interlock, and when the track’s too far gone, we quote a replacement panel instead of patching it.
- Failed glazing seals in early-2000s CGI Estate Collection windows. Owners often call thinking the window is leaking, but the moisture between the panes is the seal itself, dead. In Coconut Creek’s inland humidity, that trapped condensation never fully dries. The glass unit gets replaced, and we check the frame pocket and drainage channels before it goes back in.
- Corrosion on CGI Classic Collection hardware. Coconut Creek sits far enough inland to avoid the heavy salt spray of Hillsboro Beach or Lauderdale-by-the-Sea, but the air is still humid enough that exposed steel screws and zinc pivot bars on older single-hungs oxidize over time. We swap in stainless or marine-grade hardware and coat the contact points so the latch and pivot don’t bind again next season.
- Sagging or misaligned panels on older CGI Sentinel Series French doors. Concrete-block condo buildings settle. Let a slab foundation move for three decades and the stationary jamb shifts a few degrees out of square. The door panel sags, the latch misses the strike plate, and air leaks around the weatherstripping. We get the panel realigned and the hardware adjusted without forcing the frame.
- Permit-and-HOA approval stalls on CGI replacements. This is the Coconut Creek problem nobody outside the city thinks about: you can have the perfect CGI window picked out, but if the architectural committee hasn’t signed off, the permit clock never starts. We submit spec sheets and color samples weeks ahead and stage the whole job around the committee’s calendar. If it isn’t in writing, it isn’t a warranty, and around here, if the ARC hasn’t signed it, the city won’t stamp it.
CGI Service in Coconut Creek: What Local Conditions Mean for Your Equipment
Here’s the thing about Coconut Creek that matters for every CGI owner: the city’s dominant housing stock is 2-to-4-story concrete-block condo and villa units built between roughly 1978 and 1990, and the biggest of them all is Wynmoor Village, one of South Florida’s largest 55-and-older communities. Thousands of those original single-pane aluminum-frame sliders are still in place, and every one that fails now has to be replaced with an HVHZ-compliant product carrying a Miami-Dade Notice of Acceptance. The CGI units going into these buildings are far better than what’s coming out, but the bigger logistical reality is the approval chain. The association’s architectural review committee commonly specifies only white or bronze frames and prohibits tinted glass that deviates from community standards. A rejected spec resets the entire permit application. So a job that would take two weeks in a single-family neighborhood of Margate or Deerfield Beach can take six in Coconut Creek, not because the work is harder but because the paperwork runs on a committee calendar. We plan for that from the first site visit.
CGI Models & Products We Service in Coconut Creek
We work on the Estate Collection, Classic Collection, Targa Series, and Sentinel Series, which covers the casements, single-hungs, sliders, hinged doors, and French doors CGI has produced across multiple generations of product. Our parts approach is straightforward: factory-sourced first, aftermarket matched to the original profile when the factory part is discontinued. We keep common CGI rollers, balances, interlock components, and weatherstripping in local stock so Coconut Creek turnaround doesn’t wait on a freight shipment. When a sash or frame replacement pencils out cheaper than repeated repairs, we tell you that in writing, with both numbers side by side. For full-service CGI replacement work, our CGI sales & service team handles everything from product selection to the final NOA documentation.
CGI Service Pricing in Coconut Creek
Most CGI service calls in Coconut Creek fall into a few clear buckets, and the price depends on whether we’re repairing hardware or replacing glass or a full panel. Slide door roller repairs start around $225 to $375 depending on the Targa Series generation and how much of the track assembly needs to be rebuilt. Weatherstripping and interlock realignment typically runs $150 to $300. Failed glass unit replacement on an Estate Collection casement runs $350 to $850 depending on size and whether it’s a standard or laminated impact unit. Full panel replacement with a new impact-rated CGI sash typically lands between $1,400 and $3,800. Full window replacement, installed and permitted, runs $1,100 to $3,200 per opening depending on model line and size. If your home falls within our Coconut Creek service area, we’ll come measure, quote, and write up the numbers on paper. Estimates are free. Call (863) 591-8673.
| Service | Typical Range in Coconut Creek |
|---|---|
| Sliding door roller repair | $225 - $375 |
| Weatherstripping and interlock realignment | $150 - $300 |
| Failed glass unit replacement (casement or single-hung) | $350 - $850 |
| Full impact sash replacement | $1,400 - $3,800 |
| Complete impact window replacement, installed and permitted | $1,100 - $3,200 per opening |
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Coconut Creek
Not automatically, no. HVHZ compliance depends on the specific model line, its Miami-Dade NOA number, and whether the installation followed the approved product drawing at the time. Many pre-2000 CGI units in Coconut Creek were built to older standards that don’t meet current Broward County high-velocity requirements. We verify the NOA on the frame and compare it against today’s code before any replacement or repair. If you’re unsure about your building’s status, call (863) 591-8673 and we’ll help you sort it out.
Because the association’s architectural review committee establishes a uniform exterior standard for the entire community, and in Wynmoor Village that standard is typically white or bronze frames only, with no tinted glass that deviates from the approved look. It’s not a product limitation on CGI’s side. It’s a governance decision. We submit spec sheets and color samples to the committee weeks before scheduling work so there are no surprises after the permit is applied for.
The seal has failed, and that’s not repairable in place. The glass unit gets replaced. We remove the failed insulated unit, inspect the frame pocket and drainage channels, install a new impact-rated or standard glass unit depending on your opening’s code requirements, and reseal the glazing channel. The sash and frame stay in place if they’re sound. If the sash itself is corroded or twisted, we’ll quote both options in writing before any work starts. Call (863) 591-8673 for a free estimate on glass replacement.
Figure two to six weeks, sometimes longer. The architectural review committee must sign off before Broward County will accept the permit application, and committee calendars don’t operate on the customer’s schedule. We submit the CGI spec sheets, NOA documents, and color samples early, then stage the install around whatever the committee calendar dictates. For a current estimate on your community’s timeline, call (863) 591-8673.
That depends on the frame condition and the slab’s movement history. If the frame is sound and the slab has stopped moving, realigning the panels and replacing the hardware can buy you years of service for a few hundred dollars. If the frame itself is out of square or water has compromised the sill, a new impact-rated Sentinel Series door will outlast another repair. We’ll give you both numbers in writing and let you decide with the full picture. Estimates are free at (863) 591-8673.
Service Areas Near Coconut Creek
We work throughout the nearby coastal and inland communities as well. If you’re in CGI service in Lauderdale-by-the-Sea, where the salt air tests hardware differently, or CGI service in Pompano Beach, where the condo stock runs a little older, the same crew and the same standards apply. We also serve Lighthouse Point, Hillsboro Beach, and Oakland Park.
Book Your CGI Service in Coconut Creek Today
Call (863) 591-8673 and a live person answers, day or night. We’ll schedule a free estimate, come out, measure twice, and put the numbers in writing before anything gets ordered. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coconut Creek since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.