Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Energy-Efficient Windows in Pompano Beach: What to Know First
We repair and replace CWS energy-efficient windows throughout Pompano Beach, and most jobs are completed in a single visit. As an independent CWS service provider, we’re not tied to any manufacturer’s replacement schedule, so we’ll tell you honestly whether a failing unit needs a new insulated glass pack or a full frame replacement. The price of that answer is always a free estimate, and the work is backed by our Done Right Promise in writing. If you own a CWS window that fogs, leaks, or won’t hold a seal, call (863) 591-8673 and a live person will answer.
This page is written for homeowners in Pompano Beach who bought CWS windows years back and are now watching their electric bills climb or their glass cloud over. If that’s you, you’ll find the specifics you need below, written by people who actually work on these units.
Key Takeaways
- CWS window failure in Pompano Beach is usually seal failure, not frame failure. Salt air and 90-degree heat work on the edges of the glass pack until argon leaks out.
- You don’t always need a full replacement. Many CWS units take a new insulated glass unit (IGU) without pulling the frame.
- Warranty coverage depends on the generation of your window. Older CWS lines came with 10-year seal coverage; some newer lines carry 20. We verify before we touch anything.
- TruePane is independent of CWS. That means we recommend the fix, not the upsell, and we register both warranty layers in writing before we leave.
How CWS Products Fail – and How We Fix Them
CWS built and sold energy-efficient windows primarily through Florida’s impact-window boom years. The products are solid, but Pompano Beach has a way of finding the weak spot in any window that wasn’t installed perfectly or maintained over two decades. Here’s what we see on CWS units regularly:
- Seal failure on CWS Signature Series double-pane units. The Signature Series used a polyisobutylene primary seal and a silicone secondary seal, which works fine until the sash is flexed by wind load during hurricane season. The glass shifts a fraction of a millimeter, the edge seal begins to separate, and argon bleeds out. You’ll see condensation between the panes that won’t wipe off. Fix: we measure the opening, order a replacement IGU matched to the original Low-E coating, and reset it in the existing frame, which is usually still sound.
- Low-E coating degradation on south-facing CWS windows. Homes on canals and the Intracoastal side of Pompano get reflected sunlight off the water all afternoon, which accelerates the breakdown of older pyrolitic Low-E coatings. The coating looks pitted or oily after ten to twelve years. Fix: we replace the glass pack with updated Low-E or Low-E/argon combos that meet current Florida energy code, and we show you the spec sheet before ordering.
- Frame warping on early CWS vinyl single-hung units. The first-generation vinyl extrusions CWS used were lighter than what the company switched to later. After fifteen years in Pompano Beach sun, the check rails can bow enough that the sash doesn’t meet the weatherstripping. That creates a small air gap you can feel with your hand on a hot afternoon. Fix: new warm-edge spacer replacement sashes, or a full frame replacement if the bow is structural rather than cosmetic.
- Condensation between the panes of CWS hurricane-rated casement windows. This is the same seal-failure story but with a twist: because impact-rated casements are heavier, the hinge hardware wears first, letting the sash drop slightly and pull on the glass pack. We see this most often on casements that face the ocean and get opened daily. Fix: we replace the IG unit and rebuild or replace the hinge pair so the new glass isn’t immediately stressed.
- Failed glazing bead on CWS fixed picture windows. The rubber gasket that holds the glass in the frame has a lifespan in Southeast Florida, especially where the window gets direct afternoon sun. When that gasket hardens and cracks, the glass rattles slightly and moisture gets into the glazing channel. Fix: a relatively quick reglaze with a fresh bead and a new IGU, often done in one visit.
Our CWS Energy-Efficient Windows Process
We’ve worked on enough CWS units in Broward County to know the difference between a quick reseal and a job that needs new glass. Here’s how a typical CWS repair or replacement goes with us:
- 1
You call, a person answers. We make an appointment and show up in uniform, on time. We measure every opening twice, even on a repair, because a quarter-inch miss is how glass gets broken.
- 2
We inspect the entire unit, not just the visible problem. On CWS units, we’re checking the seal, the glazing bead, the frame condition, and the balance or hinge hardware.
- 3
We make a parts decision and show it to you in writing. If an OEM CWS glass pack is available and makes sense, we order it. If a quality aftermarket IGU with matching Low-E and argon performs as well for significantly less, we tell you and let you decide. We never hide an aftermarket part in an OEM quote.
- 4
We do the repair or replacement. For IG unit swaps, that’s remove the old glass, reset the new pack, install fresh glazing bead or sealant, and rebalance or rehinge as needed.
- 5
We test the seal and the operation. Every window gets checked for air infiltration at the sash-to-frame junction and around the glass pack before we call the job done.
- 6
We register the warranty layers in writing. The glass manufacturer’s warranty and our workmanship warranty are documented with start dates and coverage terms before the truck leaves your driveway. If it isn’t in writing, it isn’t a warranty.
What CWS Energy-Efficient Windows Costs in Pompano Beach
Here are the prices we charge for common CWS jobs in Pompano Beach. Every job gets a written line-item quote before any work begins, and the price on the quote is the price on the bill.
- Single IGU replacement (double-pane, Low-E, argon): $385 – $680 depending on size and whether impact-rated
- Full sash replacement (single-hung or casement): $450 – $950 per sash
- Full frame replacement window (impact-rated, energy-efficient): $1,100 – $2,600 installed, depending on size, series match, and opening conditions
- Reglaze and reseal only (glass pack still good): $180 – $340
- Window energy audit for a typical Pompano Beach house: $125, and we credit it toward any repair we do
What moves the price: whether your CWS unit is impact-rated, the size of the opening, second-story access, and whether we’re matching an existing Low-E coating or upgrading to a newer spec. We’ll put the exact number on paper before you approve anything. Call (863) 591-8673 for your free estimate.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been doing windows and doors in Pompano Beach since 2008, and we’re grounded in this community because Dale Kessler grew up in the Pompano Beach Highlands and learned early what salt air does to a poorly sealed frame. Our technicians are background-checked and uniformed, and they treat your home the way they’d treat their own mother’s. We quote CWS side by side against manufacturer lines like Andersen, Pella, and PGT on paper, so you see exactly what you’re paying for before you commit. Every job is backed by the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, no arguing. If the pane is not true, the job is not done. And if it isn’t in writing, it isn’t a warranty.
FAQs
In many cases, yes. CWS warranty coverage depends on the original installation date, the specific product line, and whether the failure is a manufacturing defect or an installation-related issue. We’ll check the serial numbers and documentation on your windows before any work begins, and we’ll tell you honestly whether a warranty claim is worth pursuing. If it is, we handle the paperwork and the communication with the manufacturer. If it isn’t, we’ll tell you that too.
If the frame is square, the sash closes properly, and the only problem is failed seal or broken glass, a new insulated glass unit is usually the right fix and costs less than half of what a full replacement would. If the frame is warped, the opening is out of square, or the hardware is failing in multiple places, replacement is more honest. We measure, inspect, and give you a straight answer in writing, free of charge. Call (863) 591-8673 to schedule that.
In most cases, yes. Older CWS windows used a pyrolitic Low-E coating that’s still manufactured and available. Newer lines used sputter-coated Low-E with argon fill, which is also matchable. We’ll confirm the spec on your existing glass and match it with either OEM or an equivalent aftermarket IGU. You’ll see the coating spec and argon fill rate on paper before we order.
For standard double-pane IG units and common sash sizes, we typically have the replacement glass fabricated and installed within 2 to 3 weeks. Impact-rated units and odd custom sizes take longer because the glass pack is thicker and often has to be ordered through a certified fabricator. We’ll give you a realistic timeline on your first visit, and we’ll stick to it. We’ll be there when we say.
Yes. Every CWS estimate is free, in writing, and good for 30 days. The quote lists every line item: glass pack spec, argon fill, frame work, hardware, disposal, permits where necessary, and warranty terms. When you approve it, that’s the amount you pay. No surprise line items, no change orders, no games. Call (863) 591-8673 to schedule yours.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.