Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Window Replacement: The Pompano Beach Owner’s Guide
ES Windows window replacement in Pompano Beach typically runs $450-$1,150 per window installed, depending on the series, glass package, and whether the frame needs a full tear-out or a sash-only swap. We keep the most common ES Windows replacement parts on our trucks, so a single-visit repair is the rule rather than the exception. Most Pompano Beach homeowners discover the failure the hard way: a window that won’t stay open, a crank that spins without moving the sash, or condensation that showed up after the last hurricane and never left.
You’re here because you have an ES Windows product and a part that quit. That’s exactly what we handle. As an independent service provider (not affiliated with the ES Windows brand), we match replacement parts to your specific model, year, and glass package, then install them so the window operates like it did the day it was set.
Key Takeaways:
- We stock common ES Windows rollers, balances, cranks, and weatherstripping on the truck for same-visit replacement.
- Installed pricing is quoted in writing before we start, with both warranty layers registered in writing.
- The Done Right Promise covers every part we install. If it isn’t right, we make it right.
- Live person answers the phone 24 hours a day, 7 days a week. Call (863) 591-8673.
Which ES Windows Models This Applies To
ES Windows built its reputation on aluminum and vinyl lines sized for the Florida market, and the replacement issue depends heavily on which series you have. The ES Signature series uses a different balance system than the ES Classic, and neither accepts parts from the ES Contractor line. The fastest way to confirm your series is the small etched label on the sash edge or top rail. If that label is worn off (common after a decade of salt air), we match by measuring the sash profile and the balance channel depth. Both go onto the estimate sheet, so you see the logic in writing.
When we match parts, we quote OEM first. ES Windows OEM rollers and balances are still produced for most series from the early 2000s forward, and we order through established supply channels. But honest talk: on some older ES models, an aftermarket balance from a supplier like Vision Hardware or CRL holds tension longer than the original design, and costs 20 to 30 percent less. We’ll show you both options on paper and let you decide. The one place we won’t substitute is the interlocking weatherstrip on impact-rated ES windows. That gasket is part of the wind-missile rating, and a non-OEM seal voids it. Pompano Beach code enforcement noticed when homeowners get creative here, and so do we.
Signs Your ES Windows Window Replacement Is Failing
- The window drops when you release it. That’s a failed balance cartridge. ES Windows balances use a spring-and-drum assembly that loses tension over 8 to 12 years, faster in Pompano Beach because salt-moist air corrodes the internal spring. One failed balance usually means the second is six months behind it.
- The crank rotates but the sash doesn’t budge. A stripped operator gear. On ES casement windows, the operator gear is zinc alloy, and it was never designed to force a sash that swelled in humidity. Once the gear teeth shear, the entire operator needs replacement, not just the handle.
- Condensation between the panes that never clears. The seal failed. On ES insulated glass units, seal life in coastal Pompano Beach runs 10 to 14 years. Once argon escapes and moisture gets in, the glass is done. The glass package doesn’t affect the replacement mechanical parts, but it changes the total installed price.
- The window slides like it’s grinding sand. The rollers are shot. ES aluminum sliders use nylon-rimmed steel rollers that pick up sand and salt grit from the Pompano Beach air until the rim disintegrates and the steel core rides the track. That track then gets scored, and suddenly you’re replacing the track too.
- You can see daylight or feel air moving around the closed sash. The pile weatherstrip has compressed beyond recovery. ES uses a mohair pile that breaks down under UV exposure, which South Florida delivers about 3,000 hours a year. New pile costs little, but it has to be the right density for the channel, or the window feels tight for a month and loose after that.
Replacement Cost & What’s Included
In Pompano Beach, an ES Windows replacement part installed runs between $180 and $640 per window for mechanical components (balances, rollers, operators, weatherstripping), while a full glass unit with new seals runs $450 to $1,150 including labor and disposal. These ranges come from jobs we’ve done from Lighthouse Point to Coral Springs, and they reflect three variables: the series you own, whether the frame itself is square and salvageable, and whether you carry an impact-rated glass package.
| Replacement Type | Parts Cost (Per Window) | Labor | Typical Total |
|---|---|---|---|
| Balance cartridge replacement | $45-$95 | $85-$150 | $130-$245 |
| Roller replacement (pair) | $30-$70 | $75-$130 | $105-$200 |
| Operator and crank assembly | $80-$180 | $90-$160 | $170-$340 |
| Insulated glass unit (non-impact) | $300-$600 | $150-$300 | $450-$900 |
| Insulated glass unit (impact-rated) | $550-$850 | $200-$300 | $750-$1,150 |
Every quote is a fixed price. We measure twice, quote the part number, the labor, and the warranty terms on paper, and the number on that paper is the number you pay. No change orders at the door. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway, and the Done Right Promise covers the labor. If the pane isn’t true, the job isn’t done. That’s a Dale Kessler rule, not a marketing line.
DIY or Call Us?
You can safely check a few things yourself: confirm whether the crank handle set screw is loose, clear obvious sand from the track, and note whether the failure happens on one window or every window in the room. That pattern tells us a lot before we arrive. What you should not attempt on an ES Windows unit is removing the sash to replace a balance cartridge. The tension on a loaded balance is enough to injure a hand, and on impact-rated units above the first floor, you’re working against both spring pressure and a heavy glass package. That’s a trained-professional job, full stop. If you’ve already tried and the sash is now jammed halfway, don’t force it. Call (863) 591-8673 and we’ll send a uniformed technician who’s done this across Pompano Beach enough times to have seen every version of stuck.
FAQs
Expect 10 to 14 years from OEM rollers and balances in coastal Pompano Beach. The salt air and humidity here accelerate corrosion on spring assemblies and roller rims compared to inland Florida, where the same parts often hit 15 to 18 years. Glass seal life runs short of a decade on west-facing elevations. It’s the climate, not the product line. Call (863) 591-8673 for an honest assessment of your specific elevation and orientation.
No. Balances, rollers, and operators on ES Windows are sealed units. Once the internal spring loses tension or the gear teeth shear, there’s no rebuild that lasts. We have tried every shortcut over the years, and the only one that holds through hurricane season is a clean replacement. We’ll show you the failed part when it’s out, and the bill doesn’t include time spent trying to save a part that was done. Call (863) 591-8673 and we’ll quote the replacement in writing.
Most single-window part replacements take 45 to 90 minutes on site. A full glass unit swap runs two to three hours including sealant cure time on the exterior. We carry common parts on the truck, so the first visit is usually the only visit. That’s the single-visit standard we’ve held in Pompano Beach for years, and it’s written into how we schedule. Call (863) 591-8673 to get on the schedule.
We stock the most-replaced ES Windows parts on the truck: balance cartridges for the Signature and Classic series, roller pairs for aluminum sliders, operator gears for casements, and weatherstripping for standard channel widths. Less common sizes and impact-rated glass units are ordered from our Pompano Beach supply network, usually three to five business days. We’ll tell you before you commit which path your window needs. Call (863) 591-8673 with your model number (or a photo of the label) and we’ll confirm on the spot.
Contact TruePane Windows & Doors
If you have an ES Windows product with a part that failed, call (863) 591-8673 for a free estimate. A live person answers, and you’ll talk to someone who can discuss your specific series, the failure you’re seeing, and whether it’s a truck-stock part or a fast order. We also stock replacement parts for Andersen, and Pella windows, so if the failed unit turns out to be from a different line, we’re still your call. We’ve been doing this work in Pompano Beach long enough that the fix usually takes one visit, one written quote, and one conversation about what the warranty actually covers. If it isn’t in writing, it isn’t a warranty.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.