Mr-Glass Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Mr-Glass Custom & Geometric Windows in Pompano Beach: What to Know First

We repair and replace Mr-Glass custom and geometric windows in Pompano Beach as an independent Mr-Glass service provider. Most custom shape repairs in our shop run $280-$640 per opening depending on the frame condition and glass package, and the work is typically completed same visit once parts are in hand. We are not affiliated with or authorized by Mr-Glass, but we know their products and their failure points well. This page is for homeowners who own a Mr-Glass window that is fogging, binding, or leaking around a custom arch or geometric frame, and who want a straight answer before spending another dollar. Call (863) 591-8673 and a person answers, day or night.

Call (863) 591-8673

How Mr-Glass Products Fail - and How We Fix Them

• Arched and radius units lose their seal at the apex first. We see it most often in Mr-Glass’s radius and arch-top lines with curved IGUs installed on east-facing elevations. Pompano Beach’s morning sun heats the top of that curve for hours before the rest of the frame catches up. The seal materials expand and contract at different rates between the curved and straight sections, and once moisture gets into the void you get that milky fog no amount of cleaning fixes. We reglaze or replace the sash with an IGU spec matched to the original glass package, not a generic sealed unit.
• Geometric frames rack over time and the sash stops sitting square. Trapezoids, triangles, and octagons put stress loads on the corners that standard rectangular windows never see. Mr-Glass frames with narrow sightlines look clean on the wall, but those thin joins pull apart under a decade of hurricane-pressure cycles. The window still opens, but it doesn’t close flush, and you feel the draft before you see the caulk crack. We pull the frame, square the rough opening, re-shim, and reset the unit true – that’s the actual repair, not a bead of silicone around bad geometry.
• Water intrusion at the sill on oversized picture combinations. Mr-Glass builds plenty of large fixed geometric assemblies in Pompano Beach living rooms and entryways. When the sill flashing was never lapped properly or the original installer used interior-grade sealant, the first sign is usually paint bubbling on the drywall below the window. By the time a homeowner calls us, the sill plate has often been wicking moisture for years. We remove the unit, inspect the rough opening for rot or termite activity, and rebuild the flashing in layers before the window goes back in.
• Deteriorated glazing beads on shaped units make them unsafe to operate. Mr-Glass’s beaded glazing systems on non-rectangular sashes rely on plastic or thin aluminum retainers. Salt air in Pompano Beach does a number on those materials faster than manufacturers north of Florida ever expect. A loose glazing bead on a triangle window you open for ventilation means the glass can shift in the frame. We replace the bead with the correct profile, re-bed the IGU, and make sure the sash locks without forcing it. If the bead channel is compromised, we convert the sash to a mechanically fastened bead system that will outlast the original.
• Latches and locking hardware on Mr-Glass casement and awning geometrics. These components get specified for standard North American frame depths, and every so often a Mr-Glass custom unit shipped with hardware that was almost right. A latch that catches but doesn’t fully engage is an invitation to a blow-in during hurricane season. We re-mount the hardware on a drill-and-fill repair, and if the strike is worn beyond adjustment, we replace it with something that actually interlocks.

Our Mr-Glass Custom & Geometric Windows Process

1. 1
   You call (863) 591-8673. A live person answers, asks what the window is doing, and schedules a time. We know which questions to ask about Mr-Glass geometry so the first visit is productive.
2. 2
   We measure every opening twice. For shaped windows, one measurement isn’t enough. We pull the stops where necessary and get the true dimensions before any parts get ordered.
3. 3
   We walk you through the glass and parts options. If it’s a seal failure, you see the difference between an OEM spec IGU and a quality aftermarket IGU on paper. If it’s a frame repair, we show you what’s actually wrong before quoting.
4. 4
   We do the repair or replacement in one visit. Uniformed, background-checked techs handle the job from setup to cleanup. Floors covered, furniture protected, opening left cleaner than we found it.
5. 5
   We test the unit under operation. The window opens, closes, locks, and seals right before we call it done. For impact-rated units, we verify the glass package and lamination match the MR-Glass original spec.
6. 6
   We register both warranty layers in writing before the truck leaves your driveway. The Keystone Standard says if it isn’t in writing, it isn’t a warranty. You get documentation for every part and every labor guarantee.

What Mr-Glass Custom & Geometric Windows Costs in Pompano Beach

Straight talk on money: a Mr-Glass custom arch or geometric window repair in Pompano Beach typically runs between $280 and $640 per opening for seal replacement or hardware work. Full frame removal and reset with new flashing usually lands at $700 to $1,400 depending on the size and how much rot we find underneath. Complete replacement of a large custom geometric assembly can reach $2,500 to $5,000 or higher when the glass package is impact-rated or low-E and the frame must be rebuilt to current code. What moves the price is the frame condition, glass type, access (single story versus second floor), and whether we’re repairing an IGU or replacing the entire sash. We quote side by side on paper so you see exactly what you are buying. Call (863) 591-8673 for a free estimate on your Mr-Glass window. And for the record: if it isn’t in writing, it isn’t a warranty.

Why Pompano Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’ve been serving Pompano Beach and the surrounding communities since 2008 through a heritage of craft and community commitment. Dale Kessler founded this company in 2008 after spending enough summers watching salt air eat through poorly sealed frames to understand what bad glazing work actually costs a homeowner over time. We still run it the way a second-generation tradesperson does: slowly enough to do it once, carefully enough not to have to do it twice. Every Mr-Glass repair carries our Done Right Promise, backed by The Keystone Standard. Both manufacturer warranty layers are registered in writing, durations stated, before the truck leaves the driveway. If the pane is not true, the job is not done. And when a Mr-Glass unit is beyond reasonable repair, we can quote you PGT, CGI, CWS, or ES Windows alternatives side by side on paper. You deserve a square deal, not a sales pitch.

FAQs