PGT Window Replacement Nationwide | TruePane Windows & Doors

PGT Window Replacement: The Pompano Beach Owner’s Guide

PGT window replacement in Pompano Beach typically runs $850 to $2,400 installed for a standard-size window, depending on the series, glass package, and whether the frame needs work. TruePane Windows & Doors stocks PGT-compatible replacement windows and hardware, and most jobs are completed in a single visit so you’re not living with a plywood patch any longer than necessary. Most Pompano Beach homeowners discover the problem the same way: a sash that won’t stay up, a fogged double-pane that won’t clear, or a frame that’s started letting water in around the sill after a hard east-coast rain. By the time you notice, the window has usually been failing quietly for months.

Call (863) 591-8673

Which PGT Models This Applies To

The work covers the full PGT residential lineup we see in Pompano Beach: WinGuard and WinGuard Vinyl impact lines, the ClassicVue and SpectraGuard series, and PGT’s aluminum-frame residential windows common in homes built through the 1990s and early 2000s. The critical identification step is reading the label on the sash, not the frame. PGT etches or stickers the series number onto the top or side rail of the sash itself, and that number drives everything: glass thickness, hardware type, and whether the replacement needs to meet Miami-Dade or Florida Building Code impact standards. If the sash label is gone, we measure the glass thickness and frame channel depth to identify the series.

On OEM versus aftermarket: PGT’s OEM replacement sashes and glass units are built to the original spec, which matters most on impact-rated openings. For non-impact windows, quality aftermarket equivalents from the same regional suppliers can match the original performance at a lower price and hold up fine in Pompano Beach conditions. We quote both on paper, side by side, so the homeowner sees exactly what they’re buying and why. TruePane is an independent service provider, not affiliated with PGT. We also stock parts for Andersen, and Pella, which lets us cross-check a mismatched part when an older home has mixed brands.

Signs Your PGT Window Replacement Is Failing

• Fog or condensation between the panes. The seal around the insulated glass unit has failed, letting humid Florida air into the space. Once that happens, the window loses insulating value and clarity will not come back. The glass unit is the replacement, not the whole window in most cases.
• Sash won’t stay up or is stiff to operate. The balance springs or pivot bars have worn out, often from years of salt air exposure near the Intracoastal. PGT balance hardware is series-specific, so the wrong match just fails again in a few months.
• Water stains or soft drywall under the sill. The frame’s weep system is clogged or the flashing was sealed wrong from day one. Pompano Beach rain drives sideways, and a window that leaks once will leak again harder next storm.
• Visible frame cracking or warping on the sun side. South-facing windows in Pompano Beach take brutal UV all year. Vinyl frames that once fit tight start to bow, and the glass unit loses its seat.
• Hard impact glass showing delamination or clouding at the edges. On PGT impact windows, the laminate layer separating at the edges is an early sign the unit has taken a structural hit, even if the outer pane never broke. That’s a safety replacement, not a cosmetic one.

Replacement Cost & What’s Included

Standard PGT window replacement in Pompano Beach runs $850 to $1,400 installed for a typical single-hung or sliding window up to about 48 inches wide. Larger fixed picture windows and specialty shapes run higher, and a full impact-rated replacement with WinGuard glass and the Miami-Dade approval paperwork typically lands between $1,800 and $2,400. The spread depends on glass package, frame material, the condition of the rough opening, and whether the home is in a code-enforced impact zone. Every TruePane quote is a fixed line-item price: parts, labor, disposal, and both manufacturer warranty layers registered in writing before our truck leaves your driveway. No change orders, no surprise add-ons. We stand behind the work for 90 days on top of the manufacturer’s written warranty, and we’ll register both layers so the warranty is active, not just promised.

DIY or Call Us?

Most PGT window replacement work is not a safe weekend project, and the dangerous part isn’t always the glass. Full-frame replacements involve removing the old window from a structural opening, re-sealing the rough opening, and resetting flashing to code. Get the waterproofing layer wrong and you’ll get water in the wall cavity, not on the sill, which means you don’t find it until the studs are soft. What an owner can safely do: inspect the sash label, note where fogging or cracking appears, check for visible frame warping, and clear debris from sill weep holes. Glass removal and frame replacement is a trade for a reason. If the window is a PGT impact unit, there is no safe DIY path. Call (863) 591-8673 and we’ll measure, quote, and finish it properly.

FAQs