Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Simonton Window Installation in Pompano Beach: What to Know First
We install and replace Simonton windows throughout Pompano Beach, and most single-unit installations are completed in one visit. As an independent Simonton service provider, we work on your existing frames or set new ones, quote the job before we start, and register both warranty layers in writing before we leave the driveway. If your Simonton windows are fogged, binding, or leaking air, call (863) 591-8673 for a free estimate. This page is for Pompano Beach homeowners who already own Simonton windows and need a straight answer about installation, repair, or replacement from a company that knows the product.

How Simonton Products Fail – and How We Fix Them
- Failed seals on Simonton Reflections 5500 double-hungs. The Reflections line uses an Intercept warm-edge spacer, and after eight to twelve years in Pompano Beach humidity, the desiccant inside saturates. You see condensation between the panes that won’t wipe off. We replace the insulated glass unit, not the whole sash, and the seal carries its own warranty period in writing.
- Spiral balance wear on Simonton ProFinish single-hungs. These balances are common in newer Pompano Beach townhome communities, and coastal salt air accelerates the spring fatigue inside the tube. The sash gets heavy, then won’t stay up. We swap balances in pairs so the load is even, and we check the tilt latches at the same time because they wear together.
- Vinyl frame warping on Simonton StormBreaker Plus units. This is a Miami-Dade approved impact line, but the vinyl profile expands in direct sun on west-facing walls along Federal Highway. If the original install didn’t leave proper shim clearance, the frame bows and the lock hardware loses alignment. We reset the frame with the manufacturer’s clearance tolerance, then reinstall new shims so it stays square.
- Hollow weep-chamber clogs on Simonton DaylightMax picture windows. Picture windows don’t open, so homeowners ignore the weep holes until a storm drives water indoors. The weep chambers are narrow, and Pompano Beach’s oak pollen and salt dust pack them solid. We clear the channels, verify drainage with a water test, and show you exactly where the weeps are so you can check them after storms.
- Lock and keeper misalignment on Simonton Madeira casement windows. The crank operator is solid, but the multi-point lock bar on older Madeira units drifts as the hinges settle. You feel the handle bind before the window seals. We realign the lock bar, lube the operator gears, and replace the hinge set if the old one is pitted. This restores the compression seal that keeps humid air out.
Our Simonton Window Installation Process
- 1
Call and talk to a person. A live person answers at (863) 591-8673, 24 hours a day. We listen, then schedule a time.
- 2
Measurement and diagnosis. We measure every opening twice and inspect the sash, frame, glazing, and hardware. On Simonton work, we identify the series first so we know what parts are involved.
- 3
Written quote before work begins. We put OEM and quality aftermarket options side by side on paper, with durations. You decide with full knowledge.
- 4
Installation done right. Our background-checked, uniformed technicians set the unit, shim to manufacturer clearance, insulate the perimeter, and trim clean.
- 5
Testing and cleanup. We run the window through full open-close cycles, check the seal, and clean the worksite before we go.
- 6
Warranty registration before we leave the driveway. Both manufacturer warranty layers are registered in writing. Our Done Right Promise covers the workmanship with no paperwork fights.
What Simonton Window Installation Costs in Pompano Beach
Simonton window installation in Pompano Beach typically runs $350 to $900 per window for labor and standard materials, depending on the series and what you’re replacing. A full-frame replacement on a Reflections 5500 double-hung with new interior trim runs higher than an insert install on an existing square frame.
- Insert installation (existing sound frame): $350-$650 per opening
- Full-frame replacement (new construction or tear-out): $700-$1,100 per opening
- Glass-only replacement (fogged seal on any Simonton series): $180-$420 per sash
- Balance, hinge, or lock hardware repair: $140-$300 per window
What moves the price is access, whether the old frame is square, and whether you are on an upper floor along the Intracoastal where wind exposure requires impact-rated glazing. Call (863) 591-8673 for a written, line-item estimate. Estimates are free.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for Simonton Work
Dale Kessler grew up in the Pompano Beach Highlands and spent enough summers watching salt air eat through poorly sealed frames to know what bad glazing work costs a homeowner over time. We run TruePane slowly enough to do it once, and carefully enough not to have to do it twice. Our techs know Simonton’s lines, their seals, and the specific ways Pompano Beach heat and salt break them down. When a Simonton unit is beyond service, we also work with Andersen, Pella, and PGT so you can compare product lines side by side on paper. Every job carries our Done Right Promise and The Keystone Standard: both warranty layers in writing, nothing left to memory.
FAQs
No, if the work is done correctly and the replacement parts match the original specifications. We install to Simonton’s published tolerances and register the warranty paperwork in writing before we leave. If it isn’t in writing, it isn’t a warranty.
Most single-unit Simonton installations are completed in one visit, typically three to five hours including cleanup. Full-frame replacements on multiple openings may take longer, and we tell you the schedule before we start.
We match the glass, grid, and hardware as closely as the current availability allows. Simonton has changed spacer and lock designs over the years, and we explain the differences in writing so you know exactly what you are getting.
Usually not. A failed seal on the glass unit can be replaced without tearing out the frame or the trim. We inspect the sash first and tell you if the frame is still square and sound.
Call (863) 591-8673 and a live person answers. We schedule at a time that works, and we show up when we say we will. Estimates are free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After