Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Pompano Beach: What to Know First
Therma-Tru roof replacement and installation in Pompano Beach runs between $1,800 and $6,400 depending on the entry system, framing condition, and whether you’re replacing a single door or a full entryway with sidelites. As an independent Therma-Tru service provider, TruePane Windows & Doors installs and replaces Therma-Tru fiberglass entry doors, the Classic-Craft, Fiber-Classic, and Smooth-Star lines included, with most single-door replacements completed in one day. We quote the job on paper before we touch a screw. If you own a Therma-Tru door that’s failed, warped, or simply outlived its weatherstripping, call (863) 591-8673 and a live person answers.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid fiberglass door. The failures we see in Pompano Beach are rarely the slab itself. They’re the joints, the seals, and the way the original install interacted with salt air and afternoon sun. Here’s what we find on service calls:
- Classic-Craft series - bottom rail swelling at the threshold. The Classic-Craft line uses a wood-grained fiberglass face over a composite core. The bottom rail is capped, but in Pompano Beach’s wet season, water wicks under the weatherstrip and sits against the rail cap seal. Over years, the cap separates by a hair and the composite beneath starts to swell. The door develops a drag at the bottom sweep. We pull the slab, inspect the rail, and either re-seal the cap or replace the slab if the core has softened. Therma-Tru’s own literature won’t tell you the rail cap is the first point of failure; our repair records show it is.
- Fiber-Classic series - hinge-side sag from undersized rough openings. The Fiber-Classic is a lighter door, and a lot of Pompano Beach homes built in the 1970s and 1980s have rough openings that were framed for hollow-core wood doors. When a heavier fiberglass slab goes in without reinforcing the hinge jamb, the jamb flexes and the door sags over time. We open the wall, check the king and jack studs, and sister in support before re-hanging. The fix is structural, not cosmetic.
- Smooth-Star series - glazing bead shrinkage in direct western exposure. Smooth-Star doors with decorative glass panels face full afternoon sun in a west-facing Pompano Beach entry. The glazing bead on those lites is vinyl, and years of thermal cycling shrinks it. You’ll see hairline gaps at the lite corners that let humid air into the door core. We re-glaze the lites with fresh bead and sealant, and when the glass unit itself shows fogging, we replace the lite insert as a unit.
- Sidelites and transoms - compromised flashing from original construction. Most Therma-Tru entry systems with sidelites in Pompano Beach were installed over builder-grade flashing tape that breaks down after fifteen to twenty years. Water finds its way behind the sill pan and rots the subfloor under the threshold. By the time you feel a soft spot, the damage is already done. We pull the entire entry system, replace rotted subfloor, and rebuild the sill with proper pan flashing before the new unit goes in.
- Adjustable thresholds - stripped screws and channel corrosion. Therma-Tru’s adjustable threshold is a good design, but the adjustment screws are steel in an aluminum channel. In Pompano Beach’s salt air, those screws corrode and strip. A door that won’t seal at the bottom is often just a stripped threshold screw that can’t be backed out. We drill, retap, and replace with stainless hardware when the channel is still sound. When the channel itself is pitted, we replace the threshold assembly.
Our Therma-Tru Roof Replacement & Installation Process
Here’s how a Therma-Tru job goes at TruePane, from the first call to the last sweep of the entryway:
- 1
Measure and diagnose on the first visit. We measure the opening twice, check the rough opening for square and plumb, and document the failure you’re seeing. Dale Kessler trained to read a spec sheet before he learned to sell anything, and we still work that way.
- 2
Quote on paper, side by side. If replacement is the right call, we quote OEM Therma-Tru and quality aftermarket options on the same sheet, with line items. You see exactly what you’re paying for before we order anything.
- 3
Parts decision made with you, not for you. Warranty coverage, lead time, and price all factor in. We tell you what each choice means and let you decide. If it isn’t in writing, it isn’t a warranty.
- 4
Removal and framing inspection. We pull the old unit and open the rough opening. If there’s rot, water damage, or framing that needs reinforcing, we fix it now - not after the new door is hung.
- 5
Install, seal, and test. The new Therma-Tru unit goes in square and plumb. We seal every joint, set the threshold, and cycle the door repeatedly. If the pane is not true, the job is not done.
- 6
Cleanup and warranty registration. We register both warranty layers in writing before the truck leaves the driveway. You get copies. The Keystone Standard applies to every Therma-Tru job we do.
What Therma-Tru Roof Replacement & Installation Costs in Pompano Beach
| Scope | Typical Range |
|---|---|
| Single Smooth-Star slab replacement, no sidelites | $1,800 - $2,900 |
| Fiber-Classic entry door with one sidelite | $2,800 - $4,200 |
| Classic-Craft full entry system with two sidelites and transom | $4,600 - $6,400 |
| Threshold and weatherstrip replacement only | $220 - $480 |
| Glazing bead repair or lite replacement | $180 - $520 |
The price moves on three things: whether framing repairs are needed, whether you choose OEM Therma-Tru or a quality aftermarket equivalent, and whether the job is a slab swap or a full entry system replacement. We quote it all upfront, in writing, and there are no surprise line items on the bill. Call (863) 591-8673 for a free estimate on your Therma-Tru job in Pompano Beach.
Why Pompano Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve served Pompano Beach since 2008 through a heritage of craft, and we run every job by the same rule: if the pane is not true, the job is not done. That goes for doors as much as glass. Every Therma-Tru install is covered by the Done Right Promise, and we register both manufacturer warranty layers in writing before the truck leaves the driveway. Our technicians are background-checked and uniformed, and they measure every opening twice. And if Therma-Tru isn’t the right fit for your home, we’re an authorized installer for PGT, CGI, CWS, and ES Windows as well - so the recommendation you get is the one that’s right for your house, not the one that’s convenient for our inventory. A live person answers the phone 24 hours a day, 7 days a week. Call (863) 591-8673 and you’ll talk to a person, not a voicemail tree.
FAQs
Therma-Tru’s warranty covers manufacturing defects in the slab and components, but improper installation is the most common reason a claim gets denied. If the rough opening wasn’t properly flashed, if the threshold isn’t level, or if the slab was hung out of square, the manufacturer will point to installation and walk away. We handle Therma-Tru warranty-compliant installation in Pompano Beach and register both warranty layers in writing before we leave. Call (863) 591-8673 to have your install looked at before you commit.
Most single-door Therma-Tru replacements are done in one day, assuming the rough opening is sound. If we find framing damage or rot, the job extends while we make the repair - we won’t hang a new door over a bad opening. For an exact timeline on your entry system, call (863) 591-8673 and we’ll schedule a measure and quote.
We quote both on paper and let you decide. OEM Therma-Tru parts maintain the full manufacturer warranty path and match factory specs exactly. Quality aftermarket components can cut material cost by 15 to 30 percent with performance that holds up in Pompano Beach conditions. We tell you what each choice means in writing, and we stand behind either one with the Done Right Promise.
If the slab itself is sound, repair is usually the right call. Thresholds, weatherstripping, glazing beads, and hinge hardware can all be replaced for a fraction of the cost of a new entry system. But if the composite core has swelled from water intrusion, or if the rough opening framing is compromised, replacement is cheaper over time than patching. We’ll tell you straight which side of that line your door is on. Call (863) 591-8673 for an honest assessment.
It does, mostly at the hardware and the joints. The fiberglass slab itself is resistant to salt air, but the threshold screws, hinge pins, and glazing bead fasteners are metal, and they corrode faster within a mile of the water. Dale Kessler spent enough summers watching salt air eat through poorly sealed frames to understand what bad installation actually costs a homeowner over time. We use stainless hardware and marine-grade sealant on coastal installs, which is not what the original builder did twenty years ago.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.