Therma-Tru Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

Therma-Tru Shingle, Tile & Metal Roofing in Pompano Beach: What to Know First

We provide independent Therma-Tru shingle, tile, and metal roofing service in Pompano Beach, and most window or door work on Therma-Tru units is completed in a single visit, usually within two to three hours once we’re on site. Pricing runs from about $185 for a simple weatherstrip or threshold alignment up to $1,200 or more for a full door slab replacement with upgraded hardware and new glass. If you own a Therma-Tru entry door, patio door, or sidelight system and it’s binding, leaking, or letting daylight through where it shouldn’t, call (863) 591-8673 and a live person will pick up.

Call (863) 591-8673

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru builds a solid fiberglass door, but the Pompano Beach climate finds the weak joints in any product. Here’s what we see most often, by series and symptom.

• Classic-Craft and Fiber-Classic door slabs: salt air and hinge-side sag. The door slab itself rarely fails. What fails first is the alignment. Years of salt-laden humidity working on steel hinges and the framing behind them causes the slab to settle, then it drags at the top of the latch side or won’t catch the strike plate cleanly. We see this on Fiber-Classic doors especially, because they’re lighter and the frame takes more of the load. The fix is hinge shimming or replacing the frame anchor screws, not planing the slab, which we won’t do because it voids the look and usually the fit.
• Smooth-Star and Benchmark door systems: threshold leaks after heavy rain. Pompano Beach gets sideways rain in summer storms, and a Smooth-Star entry door with an adjustable sill collects water when the sweep has compressed flat or the sill cap has cracked. Owners often mistake this for a slab problem. It isn’t. The water comes up through the threshold channel, not around the door. We replace the sweep and reset the sill cap with a proper slope, and the leak stops without touching the slab.
• Therma-Tru sliding patio doors: roller failure from sand and salt grit. The rollers on Therma-Tru patio doors pick up sand from the beach and salt grit from the air, and after a decade they bind or flat-spot. The door gets heavy, then it jumps the track. You’ll hear it grind before you see it fail. We replace the roller assemblies with a quality aftermarket set that matches the door’s weight rating, and we clean the track channel down to the aluminum before we set the new rollers in.
• Sidelight and transom glass frames: seal breakage at the frame-to-glass joint. Therma-Tru’s glass frames are extruded aluminum, and on older installations the butyl tape between the frame and the door slab dries out and separates. You get fogging between the panes, or worse, a visible gap that lets conditioned air pour out in August. This is a frame reseal job, not a glass replacement, and it’s the kind of repair a handyman will patch with silicone and call done. We pull the frame, clean the channel, and re-glaze it properly so the seal holds through the next ten hurricane seasons.
• Weatherstripping across all Therma-Tru lines: compression set from constant sun exposure. The factory weatherstrip on a Therma-Tru door in Pompano Beach takes direct sun depending on the exposure, and after five to seven years it loses its rebound. The result is a door that looks closed but leaks air, water, and noise. We replace the weatherstrip with OEM-spec material matched to the door’s profile so the door closes the way it did the day it was installed.

Our Therma-Tru Shingle, Tile & Metal Roofing Process

Every Therma-Tru job we do in Pompano Beach follows the same sequence, whether it’s a binding slab or a leaking threshold.

1. 1
   You call, a live person answers. We take down the symptom, what you’ve tried, and the age of the door or window. We don’t route you to voicemail.
2. 2
   We schedule a visit and show up on time. Our technician measures the opening, checks the reveal on all four sides, and looks at the hardware, hinges, and weatherstripping before suggesting anything.
3. 3
   We give you a written price before any work starts. No exceptions. The price says what we’re doing, what parts we’re using, and what it costs. Nothing changes on the back end.
4. 4
   We do the work and test it. For a slab adjustment, we open and close the door a dozen times, checking the latch, the sweep, and the reveal. For a leak, we run a hose test on the sill and frame.
5. 5
   We register the warranty layers in writing. On parts and materials that carry a manufacturer warranty, we document it, state the duration, and put it in your hand before we leave.
6. 6
   If it isn’t done right, we come back and make it right. That’s our Done Right Promise. No paperwork fight. You call, we return, we fix it.

What Therma-Tru Shingle, Tile & Metal Roofing Costs in Pompano Beach

Here’s what homeowners in Pompano Beach typically pay for common Therma-Tru repairs, based on what we charge and what we’ve seen from other local providers.

• Weatherstrip replacement: $185-$320, depending on the door’s profile and how many sides are being done.
• Threshold and sweep reset or replacement: $220-$425.
• Hinge shimming or slab realignment: $195-$350, depending on how far the slab has settled and whether the frame needs anchor screws.
• Roller replacement on a Therma-Tru patio door: $285-$520 per panel.
• Sidelight or transom frame reseal: $350-$680, depending on the frame size and how much cleaning the old glazing needs.
• Full door slab replacement with new hardware: $900-$1,400, installed, depending on the Therma-Tru series and the glass package.

The price moves with the part cost, how much of the frame needs attention, and whether we’re doing a repair or a full replacement. Call (863) 591-8673 for an exact, written quote. Estimates are free, and the price we quote is the price you pay.

Why Pompano Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work

We’re a local company run by Dale Kessler, who grew up in the Pompano Beach Highlands and learned early what salt air does to a poorly sealed frame. We’ve been serving the area since 2008, and we still answer the phone live, 24 hours a day, every day. Our technicians are background-checked, uniformed, and trained to measure every opening twice. We register both warranty layers in writing before we leave the driveway, and we carry the Done Right Promise on every Therma-Tru job. If your Therma-Tru product needs something broader than a repair - a full replacement with an impact-rated system, for example - we also work with PGT, CGI, CWS, and ES Windows lines, and we’ll show you side-by-side quotes on paper so you can decide with your eyes. As an independent Therma-Tru service provider, we’re not bound by a manufacturer’s playbook, which means we can tell you honestly when a repair will hold and when a replacement is the smarter money.

FAQs

Can you work on my Therma-Tru door without voiding the manufacturer warranty?
Yes, in most cases a straightforward repair like weatherstripping, threshold replacement, or hinge realignment does not void the Therma-Tru warranty, because it doesn’t alter the slab or the frame’s structural integrity. What voids warranties is improper modification, and we don’t drill into slabs or plane edges to force a fit. We’ll tell you in writing what we’re doing and whether it touches a warranted component before we do it.

How fast can you get to my Therma-Tru door repair in Pompano Beach?
We schedule most Therma-Tru repairs within a few business days, and a live person will give you a firm time when you call. We show up when we say. For a door that won’t close and lock, or a leak that’s letting water into the house during a storm, we prioritize the call and get a technician out as quickly as the schedule allows. Call (863) 591-8673 and we’ll tell you straight what the soonest slot is.

Do you use genuine Therma-Tru parts or aftermarket parts?
It depends on what’s failing. For weatherstripping, sills, and sweeps, we spec OEM-profile parts because the fit is critical and a generic part will leak or bind in a few seasons. For rollers and some hardware, we use quality aftermarket parts that match the weight and profile of your door, and in some cases they outlast the original. If it isn’t in writing, it isn’t a warranty, so we give you a written parts list for every job.

My Therma-Tru door is 20 years old. Should I repair it or replace it?
Most 20-year-old Therma-Tru slabs in Pompano Beach are still sound, because fiberglass doesn’t rot or absorb salt the way wood does. What the age shows is in the hardware, weatherstripping, and frame. If the slab is true and the glass is clear, repair is usually the right call and it’ll cost a fraction of replacement. If the glass has failed and the frame is soft from years of water intrusion, replacement starts to make more sense. We’ll show you both numbers, in writing, and you decide.

Do you service other window and door brands besides Therma-Tru?
We do. Therma-Tru is one of more than a dozen lines we work on, and we’re an authorized installer for PGT, CGI, CWS, and ES Windows, among others. If your home has a mix of brands, we can handle the whole house in one visit. Call (863) 591-8673 for a free estimate on any of them.

Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pompano Beach and nearby areas.