VLX 80 Awning Window

VLX 80 Awning Window in Pompano Beach, FL | TruePane Windows & Doors

The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, so you can leave it cracked open during a Florida downpour without water getting inside. It’s one of the most requested window styles we install in Pompano Beach because it pairs real ventilation with a clean, modern profile that works on ranch homes, mid-century builds, and new coastal construction alike. TruePane Windows & Doors is an authorized ViewLux installation partner, which means you get the manufacturer’s full warranty backing plus a local crew that knows Pompano Beach building conditions. Call (863) 591-8673 to talk specs, pricing, or a free on-site measurement.

Call (863) 591-8673

Product Overview - VLX 80 Awning Window

The VLX 80 is built around one idea: a window should let air in without letting the weather in. Because it hinges at the top and opens outward, the glass itself acts as a small awning. Rain hits the pane and runs off to the sides while fresh air flows through the bottom opening. For Pompano Beach homeowners, that’s a meaningful feature. Our summer afternoons bring near-daily showers, and most window styles force you to choose between ventilation and a wet sill. The VLX 80 doesn’t ask you to choose.

Architecturally, awning windows are the workhorse of the modern Florida home. They sit naturally above kitchen sinks, along bathroom walls, stacked in living rooms, or paired with large picture windows where you want light and air without a giant moving sash. The VLX 80’s 1.97″ profile width keeps sightlines slim, so you get more glass and less frame. That matters when you’re looking out at a canal, a golf course, or your backyard in Pompano Beach.

The frame is extruded aluminum with a wall thickness of 0.079 inches. That’s a thicker wall than what you find on entry-level aluminum windows, and it translates directly to how square the sash stays over years of opening and closing. Aluminum doesn’t rot, doesn’t warp in humidity, and doesn’t swell when the sea air sits on it every morning. The series includes a true thermal break, separating the interior and exterior metal so your air conditioning stays inside where it belongs. For buyers replacing old single-pane aluminum windows from the 1970s and 80s, the difference in comfort is immediate.

TruePane Windows & Doors has installed VLX 80 units in neighborhoods across Pompano Beach, from Garden Isles to Cypress Bend, and we’ve seen how this window holds up against salt air, hurricane-season winds, and the relentless Florida sun. It’s the window we recommend most often when a customer wants something that looks tailored but performs like a workhorse.

Technical Specifications

• Frame material: Extruded aluminum with a 0.079″ wall thickness for structural stiffness and long-term squareness.
• Profile width: 1.97″ narrow-line frame, maximizing glass area while maintaining strength.
• Operation: Top-hinged awning, outward-opening with multi-point locking hardware along the bottom rail.
• Glazing options: Clear, Frosted, Low-E, Tempered, and Laminated impact-rated glass.
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood.
• Screen options: Fixed screen or retractable screen, both mounted on the interior side.
• Thermal break: Yes, thermally separated frame for NFRC-rated energy performance.
• Installation standard: All TruePane installs comply with AAMA 2400/2410, with AAMA 812 foam sealant on every perimeter joint.

Performance Features

Thermal Efficiency
The VLX 80’s thermal break physically separates the exterior aluminum from the interior aluminum, cutting conductive heat transfer. On a July afternoon in Pompano Beach, when the west-facing wall of your home is baking, that break is the difference between a frame that radiates heat and one that stays neutral to the touch. When paired with Low-E glass, the window’s NFRC-rated performance can meaningfully reduce cooling loads.

Acoustic Performance
Pompano Beach isn’t quiet. Traffic on Federal Highway, trains on the FEC corridor, planes from Pompano Beach Airpark, and the general hum of a growing city all bleed through cheap windows. The VLX 80’s solid frame, compression gasketing, and optional laminated glass create a real sound barrier. Laminated glass is our standard recommendation for bedrooms facing busy streets or for homes near the airpark.

Airtightness & Weather Seal
Every VLX 80 uses continuous compression seals around the sash perimeter. When closed and locked, the multi-point hardware pulls the sash tight against those seals. The result is a window that doesn’t leak conditioned air, doesn’t let dust from a dry winter day drift in, and doesn’t whistle when the wind kicks up. On the installation side, TruePane follows AAMA 812, sealing every perimeter joint with low-expansion foam before interior trim goes on.

Waterproofing
The top-hinged design does most of the water management work by default. What the design doesn’t catch, the integrated drainage channels in the sill track handle. Water that does find its way into the track is routed to the exterior through weep holes. Combined with the AAMA 2400/2410 installation protocol, which governs proper flashing and water management at the rough opening, we stand behind the system’s water performance for Pompano Beach’s wettest months.

Wind Resistance
The VLX 80 is wind-load rated for South Florida’s building code requirements, which are among the strictest in the country. For homes in Pompano Beach that fall within the High Velocity Hurricane Zone requirements, the laminated impact glass option brings the window into impact-rated territory. That’s the glass we recommend for any window not protected by code-approved shutters or panels.

Security & Hardware
Awning windows are inherently hard to pry open from the outside because the opening arc is limited and the locking points sit along the bottom rail, the hardest part to reach from ground level. The VLX 80 adds multi-point locking, which spreads the lock force across several points instead of one. Combined with an extruded aluminum frame that resists flexing, it’s a window that casual intruders walk past. For ground-floor windows near alleyways or side yards in Pompano Beach, we suggest laminated glass for an added layer of forced-entry resistance.

Color & Glass Options

The VLX 80 comes in six finishes, and in Pompano Beach we see clear patterns. Pure White and Premium Black dominate new construction and modern renovations. White keeps things crisp on homes with light stucco, while black frames are the go-to for the contemporary coastal look that’s everywhere from Harbor Village to Old Pompano. Anodized Silver is the most understated, and it’s what we suggest for homeowners replacing original aluminum windows who want a clean match without repainting. Bronze and Champagne are warmer metallics that sit well on Mediterranean-style homes and buildings with earthy tones. Teak Wood is a wood-grain finish over aluminum, giving the warmth of wood without the maintenance headaches that real wood frames suffer in Florida humidity.

On glass, Clear is the baseline, and it’s fine for windows that don’t take direct sun. Frosted belongs in bathrooms, utility rooms, or anywhere you want privacy without window treatments. Low-E is our default recommendation for Pompano Beach; it reflects heat back outside, which is exactly what you want for nine months out of the year. Tempered glass is required by code in certain locations like near doors and in large floor-to-ceiling openings. Laminated glass is the safety-and-security choice, offering impact resistance, noise reduction, and UV protection in a single lite. Most Pompano Beach customers end up combining Low-E with either tempered or laminated depending on the opening.

Installation by TruePane Windows & Doors in Pompano Beach

An awning window is only as good as its installation. We’ve taken over jobs in Pompano Beach where expensive windows were removed and reinstalled because the original contractor set them out of square, foamed them incorrectly, or skimped on flashing. A window that’s off by an eighth of an inch at the rough opening will bind, leak, and eventually fail. Manufacturer warranties don’t cover installation errors, which is why the installer matters as much as the window itself.

Our process starts with a pre-install inspection. We measure the existing opening from multiple points, check the condition of the rough framing, and identify any rot, termite damage, or water staining that needs to be addressed before the new window goes in. In Pompano Beach, where many homes were built decades ago and have seen decades of salt air, this step catches problems early instead of hiding them behind new trim.

Every VLX 80 we install is set level, plumb, and square. We don’t force a window into a bad opening and call it close enough. The frame is shimmed and anchored per AAMA 2400/2410 guidelines, and the entire perimeter gets AAMA 812 low-expansion foam sealant. That foam does three jobs: it seals against air movement, blocks water from tracking along the frame, and helps with sound dampening. After the window is anchored and sealed, we run a water test on the exterior, check the operation and locking action, and then move to interior trim and cleanup. Your home is left as clean as we found it.

Pompano Beach has its own set of considerations: high humidity that tests every seal, wind-driven rain during summer storms, salt in the air that corrodes cheap hardware and fasteners, and code requirements that changed after major hurricanes. We know what the local building department expects and what the coastal environment demands. That local knowledge goes into every install we do.

Frequently Asked Questions - VLX 80 Awning Window