Entry Doors

Entry Doors in Pompano Beach, FL | TruePane Windows & Doors

An entry door is the first thing guests touch and the last thing you want failing during hurricane season. Our Therma-Tru Impact Series entry doors give Pompano Beach homeowners a door that takes a missile-impact rating seriously without looking like a vault door. We install fiberglass and steel systems across Pompano Beach, Lighthouse Point, Deerfield Beach, and the surrounding coastal communities, and every installation follows HVHZ fastening and sealing practice so the door performs the way its Miami-Dade NOA says it will. Call (863) 591-8673 to schedule a free on-site measurement and quote.

Call (863) 591-8673

Product Overview - Entry Doors

Florida entry doors live a harder life than doors almost anywhere else in the country. Salt air, afternoon downpours, summer humidity, and a wind zone that treats a front door as part of the structural envelope all work against a standard door. The Therma-Tru Impact Series is engineered specifically for that environment. We offer both fiberglass and steel frame systems, each built to accept an impact-rated glazing package or ship as a solid panel, and each tested to the Florida Building Code High-Velocity Hurricane Zone standard that Pompano Beach falls under.

Where these doors earn their place on a Florida home is in the combination of engineering and design freedom. You get a door that carries an impact rating, not a storm shutter bolted to your facade. Fiberglass versions resist the swelling, warping, and rust that coastal humidity forces on wood and uncoated steel. The steel lines give you a heavier, more rigid feel with a slimmer profile if you want more glass area. Factory-finished options arrive ready to install in White, Black, or Bronze, and the paintable woodgrain finish lets you match a custom color with a grain texture that reads as natural wood from the curb. Whether you are replacing a tired front door on a 1970s ranch in Pompano Beach or finishing a new coastal contemporary build, this line covers both the structural side and the street-facing side.

Technical Specifications

• Frame materials: Fiberglass and steel, selected by exposure and door configuration
• Maximum width: Up to 48 inches wide per panel
• Glass options: Decorative Impact Glass Insert, Low-E Insulated Glass Insert, or No Glass (Solid Panel)
• Finish options: White, Black, Bronze, and Paintable Woodgrain Finish
• Design pressure: Matched to your specific wind zone, rated up to +/-100 psf, never higher than your location requires
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to FBC HVHZ requirements

We size every opening during the free measurement so you are never paying for a design pressure rating your house does not need, and never under-spec’d for the exposure your street actually faces.

Hurricane & Compliance Performance

Laminated Impact Glass - Glass packages use a PVB (polyvinyl butyral) interlayer laminated between panes. Under a large-missile hit, the glass may crack, but the interlayer holds the broken pane in the frame so wind and water never get through the opening. That is the entire point of impact-rated glazing.

Miami-Dade NOA / Florida Product Approval - Every configuration carries a Notice of Acceptance or Florida Product Approval number tied to that exact frame, glass, and size combination. We verify the specific NOA or FL approval on your quote before you sign, so your permit package matches the door we actually install.

FBC / HVHZ Compliance - Pompano Beach sits inside the High-Velocity Hurricane Zone. These doors are engineered to FBC HVHZ requirements, which is the strictest windborne-debris standard in the state. A door rated for the Florida Building Code but not HVHZ does not belong on a house in Broward County.

TAS 201 / 202 / 203 Testing Context - The protocol family these products are tested under includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. That sequence matters: the door must take a hit, then survive repeated pressure cycles, then still resist entry attempts, all in the same test series.

Design Pressure Matched to Your Wind Zone - We specify design pressure based on your actual wind zone and exposure category, up to +/-100 psf, never higher than required. Over-specifying sounds impressive in a brochure, but it costs you money. Under-specifying is dangerous. We match it correctly.

Energy Performance - Low-E insulated glass insert options reduce heat transfer through the door, which matters on a west-facing Pompano Beach entry that bakes every afternoon from March through October. If you want glass in the door and you want it to do some thermal work, Low-E is the choice.

Color & Glass Options

The finish you pick should follow the architecture of the house, not the current trend. On the Mediterranean and Spanish-revival homes common in neighborhoods like Garden Isles and Cresthaven, a Black entry door against a stucco or earth-tone facade reads sharp and grounded. On coastal cottages and Key West-style raised homes closer to the Intracoastal, White frames keep the door airy and clean. Bronze works beautifully on mid-century and ranch homes where warm metal tones already exist in lighting or hardware. The Paintable Woodgrain Finish is the flexible option for anyone matching an existing palette or a full exterior repaint, and it gives you a wood texture without the rot and maintenance problems wood doors bring to a salt-air climate.

On the glass side, we look at what the door needs to do functionally before we talk aesthetics. A Solid Panel door gives you maximum strength, maximum privacy, and the lowest price point, and it is the right call when the entry gets direct western sun or faces a busy sidewalk. A Decorative Impact Glass Insert brings light and curb appeal to a shaded entry or a front elevation that feels heavy without something to break up the mass. The Low-E Insulated Glass Insert pairs impact protection with thermal performance, which makes it the best choice when the door gets direct sun but you still want glass. We will walk through all three options during the estimate and show you samples so you can see the finish and lite patterns in person.

Installation by TruePane Windows & Doors in Pompano Beach

An HVHZ-rated entry door is only as good as the rough opening it is set into and the fastening pattern holding it there. We see failed impact doors in Pompano Beach all the time where the door itself was fine, but the installation skipped the perimeter seal, shimmed the jamb out of square, or used the wrong anchor spacing for the wind zone. That is why we treat installation as part of the product.

Every install starts with a pre-install inspection of the rough opening, the condition of the existing framing, and the exposure the door will actually see. If the opening has rot or the king studs are questionable, we address that before the door goes in. We set every door level, plumb, and square, then mechanically fasten the frame per the configuration’s approved anchoring schedule. The perimeter gets an AAMA 812-compliant low-expansion foam sealant, which seals the gap without bowing the jamb, and the installation practice follows AAMA 2400/2410 standards for flashing and integration with the weather barrier. Before we call the job done, we run a water test on the threshold and perimeter, clean the job site, and walk you through the operation and hardware.

In Pompano Beach specifically, coastal exposure means we pay close attention to sealant compatibility with salt air and to the fastening pattern the engineer calls for on your elevation. If your project is in an HVHZ jurisdiction, which Pompano Beach is, we verify the NOA or Florida Product Approval submittal matches the installed door before it goes on your permit. Improper installation quietly voids the performance the rating represents, and the insurance and safety implications of that are not worth the risk of a cut-rate install.

Frequently Asked Questions - Entry Doors

What wind zone or design pressure is the Entry Doors rated for? Design pressure is matched to your specific wind zone and exposure, up to +/-100 psf, and never higher than your location requires. We confirm the exact number for your Pompano Beach address during the free measurement. Call (863) 591-8673 to have us pull the right spec for your street.

What is the lead time on an Entry Doors order? Lead time depends on the finish, glass package, and size, but most orders arrive within a few weeks of final approval. We provide a projected delivery window on your quote so you can plan. Call (863) 591-8673 and we will check current lead times for your configuration.

Does the Entry Doors require a Miami-Dade NOA or Florida Product Approval submittal for my permit? Yes, in Pompano Beach and the surrounding HVHZ jurisdictions, the permit package needs the NOA or Florida Product Approval number that matches your exact door configuration. We provide that documentation with your quote and confirm it before installation. Call (863) 591-8673 to start the process.

Can I customize the size or configuration? Sizes up to 48 inches wide are available, and glass inserts, finish colors, and hardware can be combined across the available options. If you have an unusual rough opening, we will come out and measure before you order. Call (863) 591-8673 to schedule a free on-site measurement.

How do I maintain the frame? Fiberglass and steel frames need little beyond regular cleaning with mild soap and water, plus occasional inspection of the weatherstripping and threshold seal. In Pompano Beach, we recommend rinsing salt residue off the frame during the dry months. Call (863) 591-8673 if you notice any separation at the perimeter seal.

Get a Quote - Entry Doors in Pompano Beach

If you are replacing an entry door in Pompano Beach, Lighthouse Point, or anywhere in the surrounding Broward County coast, start with the free on-site measurement. We will check your rough opening, confirm your wind zone and design pressure, verify the NOA or Florida Product Approval for your configuration, and hand you a written, line-item quote with no surprises. Call TruePane Windows & Doors at (863) 591-8673 to schedule your free estimate and get the project started.

Written by the team at TruePane Windows & Doors, serving Pompano Beach and the surrounding Broward County coast with impact-rated window and door installations.