Impact Garage Doors

Impact Garage Doors in Pompano Beach, FL | TruePane Windows & Doors

Impact garage doors close out the single largest opening on most Florida homes. That opening is usually the weak point in a hurricane package, and Pompano Beach homeowners who have already upgraded their windows and entry doors know it. TruePane Windows & Doors installs hurricane-code-approved impact garage doors across Pompano Beach and greater Broward County, engineered to the same wind-zone standard as the rest of your impact package. We’re factory-trained on this product line and install to HVHZ practice. Call (863) 591-8673 to schedule a free on-site measurement and line-item quote.

Call (863) 591-8673

Product Overview - Impact Garage Doors

A standard garage door is a liability in a named storm. Wind pushes against the face, the door flexes, tracks twist, and once the seal breaks, internal pressure does the rest. Impact garage doors are engineered differently. The door panel itself is reinforced to take design pressure loads up to +/-100, and the track hardware is built to keep the panel in place when the wind reverses direction and pulls as hard as it pushes.

In Pompano Beach, where the Intracoastal and Atlantic exposure put homes in the high-velocity hurricane zone, this product matters for more than code compliance. It protects the car, the water heater, the laundry room, and everything else parked in the garage. It also completes the wind-mitigation profile that insurance inspectors look for when they assess a home. If your windows and entry doors carry Miami-Dade NOAs but your garage door doesn’t, you left the back door open on purpose.

TruePane Windows & Doors installs the Insulated Steel Panel configuration most often on single-family homes and townhomes across Pompano Beach, Lighthouse Point, Deerfield Beach, and the surrounding coastal zip codes. Optional glass panel inserts let you bring daylight in without giving up the impact rating. The system is hurricane-code-approved and energy-efficient, which means it does double duty in July and in September.

Technical Specifications

• Panel construction: Insulated steel panel, non-glazed, with a solid thermal break between interior and exterior faces
• Glass option: Optional laminated impact glass panel inserts with a PVB interlayer for transparency with impact resistance
• Finish colors: White, Almond, Sandtone, and Black, all with a baked-on factory finish
• Design pressure: Matched to your specific Pompano Beach wind zone, up to +/-100, never higher than your zone requires
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, verified on your quote
• Engineering standard: Built to Florida Building Code High-Velocity Hurricane Zone requirements
• Track hardware: Reinforced vertical and horizontal tracks sized to the panel weight and design pressure load
• Installation practice: AAMA 2400/2410 standard installation, AAMA 812 low-expansion foam perimeter sealant

Hurricane & Compliance Performance

Laminated Impact Glass - When you choose the glass panel insert option, the glass is laminated with a PVB interlayer. Under impact, the glass may crack but it stays bonded to that interlayer and remains in the frame. That’s what keeps wind and water out after a strike.

Miami-Dade NOA and Florida Product Approval - Each configuration carries its own Notice of Acceptance and Florida Product Approval numbers. These are issued per configuration, so the NOA number on your quote will match the exact size, glass, and finish you order. Verify the numbers on your paperwork before your permit submittal.

FBC/HVHZ Compliance - The system is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the governing standard for Pompano Beach and every barrier-island and coastal community in Broward County.

TAS 201, TAS 202, and TAS 203 Testing Context - HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact. TAS 202 covers cyclic wind-pressure loading, which simulates a storm pushing and pulling for hours. TAS 203 covers forced-entry resistance, relevant because a damaged garage door is a burglary risk after a storm.

Design Pressure for Your Wind Zone - The panel is engineered to your wind zone’s required design pressure, up to +/-100. We never spec a heavier panel than the zone requires. Overbuilding costs you money without adding protection, and a good contractor knows where the ceiling is.

Energy Performance - The insulated steel panel reduces heat transfer through the largest opening in the house. Low-E glass options are available on the panel inserts for homes where the garage faces west into the afternoon sun, a common orientation in Pompano Beach.

Color & Glass Options

Four factory finishes cover the majority of homes we see in Pompano Beach. White and Almond work on coastal cottages, Key West-style homes, and most stucco exteriors. Sandtone suits Mediterranean and Spanish-revival homes with barrel-tile roofs and warm-colored driveways. Black reads modern and frames out homes with black windows, black entry doors, and darker fascia. All four finishes are baked on at the factory, not painted on site, so they hold up to salt air and parking-lot sun.

For glass, the Insulated Steel Panel is the workhorse. It’s private, it’s the most energy-efficient of the two, and it’s the right call for garages used as storage or workshops. The glass panel insert option changes the room. It lets natural light in, makes the garage feel like part of the house instead of a dark box, and still meets HVHZ impact requirements because it’s laminated. Homes where the garage door faces the street tend to get the most visual benefit from glass panels.

Installation by TruePane Windows & Doors in Pompano Beach

A Miami-Dade NOA is only as good as the installation behind it. We’ve torn out doors with valid NOAs that leaked because the installer set the tracks out of square, skipped the perimeter seal, or caulked the threshold instead of flashing it. That’s the real risk with garage doors in Broward County. The product can pass every test in the lab and fail in the field because someone rushed the install.

Our process starts with a pre-install inspection of the rough opening, the jamb condition, and the slab. We check the header for deflection before we hang anything. Then we set the tracks level, plumb, and square, with the panel balanced so it rides without binding. We seal the perimeter with AAMA 812 low-expansion foam, per AAMA 2400/2410 standard practice. Low-expansion is the right product here because high-expansion foam pushes on the jambs and warps the track over time. After everything is set, we run water across the threshold and check the corners for intrusion, then clean up and walk you through the operation.

In Pompano Beach specifically, the big considerations are coastal exposure and permitting. Homes east of Federal Highway and along the Intracoastal sit in stricter wind zones, and the design pressure spec follows that. The local building department requires NOA or Florida Product Approval documentation with the permit application, and we know which numbers they accept on which products. If your garage is on a home built before the 2001 Florida Building Code, the existing opening may not be square, and shimming and flashing a steel door into an older CBS structure takes someone who’s done it before. We have.

Frequently Asked Questions - Impact Garage Doors

What wind zone or design pressure is the Impact Garage Door rated for?
The door is engineered to your specific Pompano Beach wind zone, with design pressures matched to your location up to +/-100, never higher. The exact design pressure on your quote is determined by where your home sits relative to the coast, the Intracoastal, and the surrounding exposure. Call (863) 591-8673 with your address and we’ll confirm your zone before the estimate.

What is the lead time for an impact garage door in Pompano Beach?
Lead times run roughly 4 to 8 weeks from order to installation, depending on the size, finish color, and whether you choose glass panel inserts. Custom sizes and less-common finishes typically add time. If you’re scheduling around a closing date or an insurance renewal, call us early. We’ll give you an honest production window when we quote.

Does my permit need a Miami-Dade NOA or Florida Product Approval submittal?
Yes. Pompano Beach’s building department requires NOA or Florida Product Approval documentation for any HVHZ-rated garage door installation, and the numbers must match the exact configuration on your order. We provide the approval numbers with your quote so you can file them with your permit application before we schedule the install.

Can I customize the size or configuration?
Most single and double garage openings in Pompano Beach track homes fall within standard ranges that this system covers, but we can quote custom widths and heights where the opening allows. Glass placement, panel configuration, and finish color are all selectable. What you can’t do is pair a configured size with a design pressure lower than your wind zone requires, and we won’t quote one.

How do I maintain the frame and track?
Rinse the exterior face and track area with fresh water every few months, especially within a few blocks of the beach where salt accumulates. Keep the track free of debris, and lubricate the rollers and hinges with a silicone-based spray twice a year. If the door ever starts binding or running louder than it did, have it checked before a small misalignment becomes a jammed panel. Call (863) 591-8673 for a service check in Pompano Beach.

Get a Quote - Impact Garage Doors in Pompano Beach

We quote impact garage doors the way a hurricane-rated product should be quoted: with exact design pressures, line-item pricing, and the NOA numbers you’ll need for your permit. Call TruePane Windows & Doors at (863) 591-8673 to schedule a free on-site measurement in Pompano Beach.

Written by the team at TruePane Windows & Doors, serving Pompano Beach since 1994.