Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSingle Hung Windows in Pompano Beach, FL | TruePane Windows & Doors
Single hung windows are one of the most common replacement profiles we install in Pompano Beach. The design is simple: a fixed upper sash and an operable lower sash, both glazed in laminated impact glass. That layout gives you high ventilation where you want it, plus a sealed top that never moves. Homeowners across Pompano Beach choose this profile when they want impact-rated protection without the higher cost of more complex operable systems. TruePane Windows & Doors installs single hung units across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so we can match your opening precisely. Call (863) 591-8673 to talk through options for your Pompano Beach home.
Product Overview - Single Hung Windows
A single hung window keeps the top sash locked in place while the bottom sash slides upward on a vertical track. It reads clean from the street, works naturally over kitchen counters and bathroom sills, and costs less than casements or horizontal rollers because there is only one moving panel. For Florida homes, the fixed upper sash actually matters a great deal: fewer moving parts means fewer points where water, wind, and debris can find a way through. The lower sash locks into the frame with reinforced meeting rails, and the entire unit is weather-stripped where the two sashes overlap.
In Pompano Beach, where wind-driven rain and impact loads are part of the daily conversation from June through November, this profile has earned its place. We fit it in ranch-style homes near McNab Road, mid-century builds west of I-95, and newer construction in the neighborhoods around Palm Aire. Frame choice comes down to aluminum or vinyl. Aluminum gives you narrower sightlines and a slimmer profile for larger openings. Vinyl is warmer to the touch, quieter in hard wind, and typically lands at a lower price point. Both take laminated impact glass, and both are installed by TruePane Windows & Doors crews under the same HVHZ-aware process.
Technical Specifications
The single hung units we order for Pompano Beach projects are configured per opening, which means there is no one universal spec sheet. What stays consistent across every order is what we’re laying out below.
- Frame materials: Extruded aluminum or multi-chamber vinyl, selected for coastal exposure and opening size.
- Glass packages: Laminated impact glass with PVB interlayer; Low-E insulated glass; tinted glass; clear glass.
- Finishes: White, almond, bronze, black, and tan, available to match existing trim or a new exterior palette.
- Screens: Half screen for standard lower-sash ventilation or full screen when you want a covered look across the full opening.
- Design pressure: Matched to your specific Pompano Beach wind zone, up to +/-100. We do not over-spec beyond the code requirement for your zone.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers are issued per configuration and listed on your quote, not on this page.
Hurricane & Compliance Performance
The following features define how single hung windows in impact-rated spec behave in a Florida storm, and what documentation follows each order we place.
Laminated Impact Glass
The glass package is built around a PVB interlayer. When a large missile hits the glass, that plastic layer holds the broken pane together and keeps it in the frame. The window may crack, but it does not blow out and depressurize your home during a storm.
Miami-Dade NOA / Florida Product Approval
Each configuration carries its own Notice of Acceptance and Florida Product Approval number. Those numbers are issued per size, frame, and glass combination, so the specific NOA that applies to your window will be listed on your quote from TruePane Windows & Doors.
FBC / HVHZ Compliance
The product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. For Pompano Beach homeowners, that means the design has been evaluated for the specific wind and impact conditions recognized across Broward County’s HVHZ jurisdiction, not a generic national standard.
TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated impact products are tested under the TAS protocol family. TAS 201 covers large-missile impact resistance, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. Together they simulate what a window endures during and after a named storm.
Design Pressure for Your Wind Zone
We match the design pressure rating to your wind zone, up to +/-100. Higher tested ratings exist on some products, but we do not push a DP number beyond what your Pompano Beach location actually requires. Over-specifying drives cost with zero added protection for the homeowner.
Energy Performance Options
Low-E and insulated glass are available for single hung units where energy performance matters. If your openings face direct afternoon sun or you’re trying to reduce afternoon heat gain in a specific room, we’ll walk through which glass package fits in budget and whether tinted glass makes sense.
Color & Glass Options
Finish color is where a replacement window works with the house or fights it. White and almond remain the most ordered colors in Pompano Beach, particularly on older ranch homes with stucco exteriors. Bronze and black read more contemporary and hold up well visually on newer builds and townhome elevations where darker trim and impact windows are part of the architecture. Tan bridges the gap for Mediterranean-style homes around Pompano Beach that need a softer contrast against cream or beige exterior walls.
Glass selection follows a simpler logic. Clear laminated impact glass is the base pick when the priority is storm protection and you have shade or you do not mind the sun’s heat. Low-E insulated glass adds an insulating air space and a low-emissivity coating, a good fit for bedrooms or living areas with western exposure. Tinted glass cuts brightness and heat without changing the visual style of the window from the outside. The right pick depends on which way the opening faces and what that room has to do all summer long.
Installation by TruePane Windows & Doors in Pompano Beach
A properly tested single hung window means nothing if the installation is sloppy. The NOA and Florida Product Approval apply to the manufactured unit, not to whatever happens once it is set into a rough opening. That is why we treat installation as the second half of the product, not an afterthought.
Every Pompano Beach installation starts with a pre-install inspection. We check the rough opening dimensions, look for existing water damage or rot in the frame, and confirm the water-management approach before the new window goes in. From there, the unit is set level, plumb, and square, shimmed at the correct points, and anchored per the manufacturer’s approved details. The perimeter is sealed with AAMA 812 low-expansion foam sealant, and the installation follows AAMA 2400 and 2410 practice. We run a final water test on the exterior and walk the interior with you before calling the job done.
Pompano Beach presents a few consistent challenges. Coastal exposure means salt-laden air corrodes cheap hardware faster than builders expect. Wind zone requirements differ between single-family homes inland and buildings sitting closer to the beach. And Broward County permitting departments expect the NOA or Florida Product Approval documentation to be attached to the permit package, correctly matched to the opening. TruePane Windows & Doors handles that documentation as part of the project, so your homeowner’s permit submittal does not stall over paperwork. Improper installation compromises an NOA-rated system, and a window that passes a Miami-Dade test can still fail in your wall if the perimeter is not sealed and anchored correctly. We install it the way the approvals assume it will be installed.
Frequently Asked Questions - Single Hung Windows
Design pressure on this product is matched to your specific Pompano Beach wind zone, up to +/-100, never higher than required. The exact DP rating for your opening is confirmed during measurement and listed on your quote.
Lead time runs on a configuration-by-configuration basis. Standard sizes and finishes can move quickly, while custom sizes or less common color combinations add production time. Once we measure your openings and confirm the configurations, we give you a realistic delivery window before you sign anything. Call (863) 591-8673 and we can ballpark the current production timeline.
Yes, for impact-rated replacement windows in an HVHZ jurisdiction like Pompano Beach, the permit package generally requires the applicable NOA or Florida Product Approval document matched to your specific configuration. We provide the correct documentation for the products we install, and we coordinate with your contractor or permit runner to keep the submittal clean.
Most openings can be built to fit. Width and height are measured to the rough opening, and we configure the glass, finish, and screen options for each unit. If you are replacing an older non-impact single hung, the new frame depth and mulling options occasionally change what fits. That is part of the on-site measurement we do before quoting.
Basic maintenance is simple: keep the lower track clear of sand and debris, wipe down the weatherstripping with a dry cloth, and avoid lubricants that attract dirt and grit. In Pompano Beach’s salt air, we recommend rinsing exterior aluminum frames with fresh water a few times a year. Any hardware issues should be handled by an installer familiar with the product rather than forced, since forcing a sticking sash can damage the meeting rail seals.
Get a Quote - Single Hung Windows in Pompano Beach
Single hung impact windows are a serious upgrade for any Pompano Beach home, and the quote process starts with free on-site measurements. Call (863) 591-8673 and tell us how many openings you’re looking at. We’ll configure the right frame, glass, and finish, pull the correct NOA documentation, and give you a written line-item quote before you commit.
Written by the team at TruePane Windows & Doors, serving Pompano Beach homeowners with hurricane-impact window and door installation across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
