VLX 500 Sliding Window

VLX 500 Sliding Window in Pompano Beach, FL | TruePane Windows & Doors

The VLX 500 Sliding Window is a high-performance aluminum sliding system built around a slim profile, effortless glide, and the choice of 2-track or 3-track configurations. It’s the window Pompano Beach homeowners and condo associations turn to when they want clean sightlines, reliable operation, and glass that handles Florida sun and storm season without complaint. TruePane Windows & Doors is an authorized ViewLux installation partner, which means you get the product backed by a crew that installs it to manufacturer spec, not just someone who sells it. Call (863) 591-8673 to talk through your project or schedule a measurement.

Call (863) 591-8673

Product Overview - VLX 500 Sliding Window

The VLX 500 exists for people who like horizontal lines and don’t want the window frame competing with the view. It is a high-performance aluminum sliding system where the sashes move on a track with almost no resistance, the profile stays narrow, and the frame does not bow or flex under Florida heat. Whether you’re replacing jalousie windows in a 1970s Pompano Beach ranch, updating a condo off Briny Avenue, or building new construction near the Intracoastal, this series fits without fighting the architecture.

Aluminum is the right material for Pompano Beach. It doesn’t swell with humidity, it doesn’t rot, and it doesn’t warp when salt air sits on it year after year. The VLX 500 takes that material and refines it. The frame profile measures 1.97 inches wide, which is slim enough to read as modern but substantial enough to hold a large insulated glass unit without sagging. Wall thickness on the extrusion is 0.079 inches, which gives the frame torsional strength that cheap residential aluminum simply doesn’t have. That matters when a slider is six feet wide and gets pushed open and shut hundreds of times a year.

TruePane Windows & Doors recommends the 2-track configuration for bedrooms, kitchens, and most residential openings, while the 3-track version works well for wider openings where you want two operable sashes and a fixed panel, or when you need maximum ventilation from a single opening. Both configurations share the same hardware family, so the glide and latch feel are consistent throughout the home.

Technical Specifications

Here are the numbers that define the VLX 500, presented the way we explain them to homeowners during a consultation in Pompano Beach.

• Frame material: Extruded aluminum with thermal break construction
• Wall thickness: 0.079-inch extrusion wall for structural rigidity
• Profile width: 1.97-inch slim sightline
• Track configurations: 2-Track (one fixed, one sliding) or 3-Track (two sliding, one fixed)
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated (impact-rated available)
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Retractable Screen, Sliding Screen
• Performance standards: NFRC-rated thermal performance, AAMA 2400/2410 installation compliance, AAMA 812 low-expansion foam perimeter seal, wind-load rated for South Florida climate

The combination of the 1.97-inch profile and multiple track options means this slider scales from a modest 36-inch bathroom window to a 12-foot opening across a living room wall, all with the same frame aesthetic.

Performance Features

Thermal Efficiency. The VLX 500 uses a thermal break between the interior and exterior aluminum surfaces, which interrupts heat transfer through the metal. That keeps air-conditioned air inside your Pompano Beach home during August. Pair it with Low-E glass and you’ve got an NFRC-rated assembly that genuinely lowers cooling load, especially on east and west exposures.

Acoustic Performance. Aluminum is dense by nature, and the VLX 500’s multi-chamber extrusion combined with insulated glass cuts exterior noise measurably. If you live near Federal Highway, Dixie Highway, or the train tracks through Pompano Beach, laminated glass upgrades push that reduction further. We’ve had customers in Garden Isles comment on how much quieter the house feels after replacement.

Airtightness & Weather Seal. The sashes seat into full-perimeter weatherstripping that stays pliable in coastal heat and doesn’t harden after three summers. Airtightness ratings on this series meet what you’d expect from a high-performance aluminum product, and that translates to fewer drafts, less dust, and stable indoor humidity.

Waterproofing. The frame design includes internal drainage channels that move water out and away from the sill rather than trapping it against the glass. This is a bigger deal in Pompano Beach than people realize. Afternoon thunderstorms can dump an inch of rain on a west-facing slider in an hour. The drainage design, combined with AAMA 812 foam sealant on the perimeter during installation, is what keeps walls dry.

Wind Resistance. The VLX 500 is wind-load rated for the demands of South Florida construction. In Pompano Beach, that means the assembly is engineered to hold up under sustained wind pressure and storm gusts. For properties in the wind-borne debris zone, laminated impact glass is available and we install it with the same frame, same hardware, same warranty.

Security & Hardware. The sliding sash locks at the meeting rail, and the hardware is built to resist prying. Because the extrusion wall is 0.079 inches, the lock mortise sits in solid metal, not a thin veneer. That detail matters when someone tests the latch from the outside. Multi-point locking is available on larger openings.

Color & Glass Options

The VLX 500 comes in six finishes, and each has its place in different Pompano Beach neighborhoods. Premium Black and Pure White are the two most requested finishes for contemporary renovations. Black frames against white stucco reads clean and purposeful. Anodized Silver gives you the classic aluminum look, though done properly, it resists the chalky oxidation you see on old silver windows around town. Bronze is the underrated choice for mid-century and ranch homes, where it disappears against darker brick or stone. Champagne suits coastal interiors with warm stone and beige tones. Teak Wood is a wood-grain transfer finish designed for HOA communities requiring wood-look windows without the maintenance of actual wood in a salt-air climate.

On glass, Clear is standard float glass, fine for interiors and budget-driven projects. Frosted gets specified for bathrooms and any window facing a neighbor’s wall. Low-E is what we recommend for every sun-facing opening in Pompano Beach. It cuts solar heat gain while keeping visible light, and the difference is felt the first afternoon. Tempered glass is code-required in specific locations like doors and low windows, and it shatters into small pieces rather than shards. Laminated glass is the impact-rated option, two panes bonded with a plastic interlayer, and it’s the choice for hurricane protection without shutters. You can combine Low-E coatings with laminated construction; they aren’t either-or.

Installation by TruePane Windows & Doors in Pompano Beach

A well-manufactured window installed badly becomes a leak. That’s the plain truth, and it’s why TruePane Windows & Doors treats installation as the product, not an afterthought. We install every VLX 500 Sliding Window in Pompano Beach to AAMA 2400/2410 standards, which govern the proper installation of windows into residential and light commercial openings. What that means practically: the opening gets inspected before anything gets ordered, the frame goes in level, plumb, and square, and it’s shimmed correctly so the sash glides on day one and on day 5,000.

After the unit is set, we run AAMA 812 low-expansion polyurethane foam around the full perimeter of the frame at every joint. This is where most South Florida window failures originate. A gap left unsealed behind the caulk line lets wind-driven rain find the wall cavity. That foam bond is the air and water barrier, and it’s required, not optional. Once the foam is cured, the exterior gets sealed, the interior is trimmed, and the window is water-tested. We check the track alignment, the lock engagement, and the screen fit before we call the job done.

Pompano Beach has specific realities we build for. Salt air accelerates corrosion on fasteners and hardware, so we use fasteners rated for coastal exposure. Building code here recognizes the wind pressure demands of the Atlantic seaboard, so every permit we pull carries the right wind-load documentation for your specific elevation and exposure. If you’re in a condo with association requirements, we can supply the specs and finish samples your board needs.

Here’s the important part for warranty purposes: ViewLux warranties cover manufacturing defects. They do not cover an installation failure. If a window is installed improperly and leaks, the manufacturer will point at the installer. When TruePane Windows & Doors installs it, you have one company responsible for both the product and the labor, and we don’t walk away from a callback.

Frequently Asked Questions - VLX 500 Sliding Window

What is the lead time for the VLX 500 Sliding Window? Most orders in Pompano Beach run four to six weeks from field measurements to delivery, depending on glass type and finish. Custom sizes and laminated impact glass can push that to eight weeks. We order after the final measure, not the initial quote, so your lead time clock starts when the size is actually locked. Call (863) 591-8673 and we’ll give you a current timeline for your configuration.

Does the VLX 500 qualify for energy tax credits? Answer depends on the glass package specified. Low-E insulated glass configurations generally meet the Energy Star criteria for the South Florida zone, which is the baseline most energy tax credits reference. The exact credit eligibility depends on the year, your filing status, and the specific glass build. We can supply the NFRC label data for the configuration you’re considering so your tax preparer can confirm eligibility.

What warranty comes with the VLX 500 Sliding Window? The manufacturer covers the frame and glass against defects in materials and workmanship, and the specific terms vary by product line and glass type. Corrosion treatments on coastal-rated finishes carry their own coverage provisions. TruePane Windows & Doors also stands behind our labor. Exact warranty terms are in writing on every quote we produce, never verbal.

Can I customize the size of the VLX 500? Yes, the VLX 500 is ordered to your exact opening dimensions within the structural limits of the frame design. There is no stock-size penalty for custom sizes, which is why proper field measurement matters so much in older Pompano Beach homes where openings are not always square or plumb. We measure every opening before the order goes to production.

How do I maintain aluminum frames with Pompano Beach salt air? Wash the frames and tracks with mild soap and water every three months, rinse thoroughly, and keep the drainage channels clear of sand and debris. Do not use abrasive cleaners on the finish. Lubricate the rollers annually with a dry silicone spray. For oceanfront or Intracoastal properties, rinse more frequently. The finishes are engineered for coastal exposure, but salt buildup accelerates everything if left unattended.

Get a Quote - VLX 500 Sliding Window in Pompano Beach

If you’re pricing the VLX 500 Sliding Window for a Pompano Beach project, we’ll give you a free on-site measurement and a written, line-item quote. You’ll know exactly what the windows cost, what the install costs, and when we can start. Call TruePane Windows & Doors at (863) 591-8673 to schedule your consultation.

Written by the team at TruePane Windows & Doors, serving Pompano Beach, FL.